I've watched a few videos on how to install the sound files on to the t-lite. I don't get why it's not working for me. I followed the instructions and extracted all of the files to my SD card. I plug it into the t-lite and no sounds happen. Am I supposed to turn something on on the transmitter? It didn't show what to do.
No, the T-Lite should be able to play sounds without you setting anything additional up. Are you sure your SD card is working properly? can you access the content form the radio? Which size is your SD card? Best try with a small one, like 8 or 16GB...
@@stylesuxx it’s an 8GB one I got just for this reason. I extracted the files as shown and downloaded them to the SD card. They are all showing as you demonstrated when you clicked into each folder. I then ejected the SD card, put it into the controller. Turned it on and no voice played.
@@paulleon6057 If you long press the "sys" button and then go to page 2 (SD-HC Card), do you see the "SOUNDS" folder? If so, enter it and try to play a sound by long pressing enter and selecting "Play". In the "Radio Setup" Menu also check that Wav Volume is turned up.
Hey! my Jumper t-pro doesn't seem to read my SD card - I've put the contents onto the SD card and put this in the radio but it says directory empty - any thoughts on how to fix? Thanks!
Hahaha, I was actually thinking about that after I got the first Schwarzenegger comments, so yeah - maybe I'll do that until I find my own signature line :-D
Hello stylsuxx I installed an SD with the sounds files, I get the welcome sound, lost telemetry sound, and switch sound. But I do not get the arm sound, angle, and acro sound. I understand that special functions are required, can someone help with a guide with the procedure, I am having trouble with that part.
I did a new custom Wav file to play a new welcome message and it works but now a red light comes on showing 'sd contents' warning. Anyway to fix that ?
@@stylesuxx The sound works so I've successfully added my own welcome message but when I power on the red light comes on and says sd content .. till I hit a button then back to green light
Should be set up by default - I think you can set the value at which the low and critical alarms are tirggered. That should be possible in the last model screen - telemetry.
great video. Portal sounds are genius.
First one to recognize ;-)
I enjoyed watching this! Nice content 👌
NIce, easy to follow. Thank you. Is the sounds-folder relevant for vario beeps? Just got my hands on a t-lite ...
No, the beeps work without SD card.
Thank you very much 👍🏼👍🏼👍🏼
I've watched a few videos on how to install the sound files on to the t-lite. I don't get why it's not working for me. I followed the instructions and extracted all of the files to my SD card. I plug it into the t-lite and no sounds happen. Am I supposed to turn something on on the transmitter? It didn't show what to do.
No, the T-Lite should be able to play sounds without you setting anything additional up. Are you sure your SD card is working properly? can you access the content form the radio? Which size is your SD card? Best try with a small one, like 8 or 16GB...
@@stylesuxx it’s an 8GB one I got just for this reason. I extracted the files as shown and downloaded them to the SD card. They are all showing as you demonstrated when you clicked into each folder. I then ejected the SD card, put it into the controller. Turned it on and no voice played.
@@paulleon6057 If you long press the "sys" button and then go to page 2 (SD-HC Card), do you see the "SOUNDS" folder? If so, enter it and try to play a sound by long pressing enter and selecting "Play". In the "Radio Setup" Menu also check that Wav Volume is turned up.
Any idea why only some of the sounds are used? Arm for example is not making noise even though it has the sound file. Using a T Lite radio
Well, you need to assign that to a switch within OpenTX. OpenTX dies not really know which switch you are using for arming.
Hey! my Jumper t-pro doesn't seem to read my SD card - I've put the contents onto the SD card and put this in the radio but it says directory empty - any thoughts on how to fix? Thanks!
How big is your card? Make sure its FAT formatted. When in doubt, try a different card
What format should be used for the sd-card, fat32 or something else? Thanks for your video!
Fat32 and Fat16 should both be fine.
great vids, how about finishing off the vid with .... I`ll be back! :p
Hahaha, I was actually thinking about that after I got the first Schwarzenegger comments, so yeah - maybe I'll do that until I find my own signature line :-D
@@stylesuxx defo .. please do! ...great channel, content.. thx
"mimetic polyalloy"
"What's that?"
"Liquid metal"
Hello stylsuxx I installed an SD with the sounds files, I get the welcome sound, lost telemetry sound, and switch sound. But I do not get the arm sound, angle, and acro sound. I understand that special functions are required, can someone help with a guide with the procedure, I am having trouble with that part.
Could you share your voice pack? I quite like it
I can, but it's really not very complete, if you are still interested, I can upload it for you.
@@stylesuxx Hi I'm interested, can you upload it please?
@@stylesuxx would be great even if it's not complete
@@stylesuxx plz upload bro
Will a class 6 sd-card be fast enough? I found an old 8Gb card I had, so if possible I’d like to use it.
Yeah, that should be fine.
I got the voice on the t lite but when I use 3 way switch for angle hozion and acro It doesn't say any these any ideas why please
how you assingn voice to every switch thats only for on and off and warnings but to change the acro or arm disarm ???
You would set this up via special functions.
I did a new custom Wav file to play a new welcome message and it works but now a red light comes on showing 'sd contents' warning. Anyway to fix that ?
SD card warning? It should show a version on screen, change the text file on the sd card according to that version and you should be good.
@@stylesuxx The sound works so I've successfully added my own welcome message but when I power on the red light comes on and says sd content .. till I hit a button then back to green light
nice video! how i setup rssi voice alert
Should be set up by default - I think you can set the value at which the low and critical alarms are tirggered. That should be possible in the last model screen - telemetry.
wie kann ich opentx updaten?
Gibt noch keinen offiziellen Build der die T-Lite supported, musst nen nighlty build verwenden.
When do we *"get in the choppah!"*
😵
*Aghhhughahhhuh* 😵
Hehe, I need to be careful as to not be copyright struck :-D
@@stylesuxx
You tell them you are the new and improved!
Hello, this radio has DSC input? thanks
It has a trainer port, if that's what you are asking for?