This is a great overview for what many people say is too difficult. It answers a lot of questions and gives direction on how to tackle the fundamentals. Thanks for sharing your knowledge!
Nice to see this uploaded again! I had the original video saved since 2016, with different background music, no subtitles, slightly different narration, etc. Gonna save this one too. Thanks!
@HakenE30 your videos are invaluable as I am just about to attempt and I repeat attempt an N55 6spd Auto Engine and Trans swap into a 1998 Z3. I have a complete working 2010 E92 335i Donnor car. I would love to hear your thoughts about a few points as I also intend to transplant all E92 harnesses, Dashboard and Steering Wheel. This leaves me with a way to overcome the DSC communication issue with the Rear end and Front Brakes etc. I am in Australia so both cars are Right Hand Drive.
hey, i have an e30 and I'm thinking about swapping an n20 engine, the 4 cylinders, do think that it will be hard, and also what engine mounts would you recommend
I know this vid is bit dated. But I would like to pick your brain. I want swap m62tu out of my RR L322 with n55. Its basically e53 x5. Im trying to gather CAS DME situation vs Cluster vs use of Zf5hp. L322 has 2 speed case.
Is this thing still kickin? Can we get an update.. this looks like a fun swap i have a n55 coming out my x5 soon n i wanna throw it in a e36 shell. Would the xDrive be an issue?
I sold the car, but it is still around and running, problem is that N55 is not going down in price because people tend to blow them up, so they are in short supply always
I see you extended you subframe to fit your mounts but can you just install the mount turned like you showed ? Or you absolutely need to extend the subframe? Thanks
great work! , its been 2 years is there and toubles with your car ? if i do this to my f32 will i have any issues im driving it daily ? i want to upgrade to b58
@@HakenE30 I'm looking to to an n54 swap in the future and have watched your original video years ago now for this swap. Amazing work. I am curious how you did the instrument cluster and coding wise what you did to make it better? If you could be so kind to explain ? Or upload a video ? 😁
Hi Haken, Great Car. I‘m thinking about a N54 Swap. Wich Engine Mounts/Brackets do you have used. They Look like the Original from the N55/54. And have you take it from the 5-series E60 or 3-Series E90 Greets from Germany M Mario
@@HakenE30 thanks a lot for your answer. it looks as if the bracket fit very well on the e36 front axle carrier. at least on the driver's side or did you have to weld a lot?
That’s awesome. And it’s so well integrated in to the E36, the cluster works, there’s central locking off the modern key... nice work.
haken is a legend - a very nice swap and very passionate about bmws - love your work
This is a thing of beauty. You've done an amazing job not only with the car but video as well
This is a great overview for what many people say is too difficult. It answers a lot of questions and gives direction on how to tackle the fundamentals. Thanks for sharing your knowledge!
Thank you for letting us know what driveshaft we need for this build. Excellent.
26:02
We have two n55 swap e46s on my page.
This swap is much easier on a e46 chassis 👌👌👌
yes, but then what is the point, E90 is only 50kg heavier than E46
@@HakenE30 this is true 👌 still a cool swap to do on both of these chassis’s especially with all the tuning available now.
Nice to see this uploaded again! I had the original video saved since 2016, with different background music, no subtitles, slightly different narration, etc.
Gonna save this one too.
Thanks!
Awsome job! Thanks for sharing. Inspiring swap! Must be really fun to drive.
Nice job. With automatic transmission. Their are wiring harnesses being sold, but only for manual not automatic.
This is the most dope video I have actually seen.
Very unexpected swap, that thing will kill lot of cars. Very cool. Thanks for the detailed video.
Great craftsmanship. I have an 318ti. 98 mtech I just kicked up. I’ll be doing this soon
Thank you for posting this. I am really really enjoyed how you do the engine swap and well explanations. Job Well done.
Dude is so nice and a pro! Thanks soooooo much for this cideo
WONDERFUL ,,,EASY FOR INTELLIGENT PEOPLE AND CLEAN TOO,,,KEEP UP THE GOOD WORH
again. great video. im looking to do an N53 or N55 into my year 1990 e32 730i. a lot of your work here will translate well.
What about the front sump oilpan?
Bro you had the greatest BMW engine and swapped it...
lol
You need to do the electrical stuff part now.....Very nicely built!
just amazing. wonderful video and you using your stock rear differential is very cool.
amazing video man. im planning on the same swap but with a F30 328i, i love my car specs and i just want those 2 extra cyl. very informative video!
I really really respect you. This is awesome.
Not so bad, keep doing the great work
beautiful and genius work well done
better than all the m50 turbos all the time cuz this will actually go pretty efficient when driving normal
yes this car is still running with the same engine 7 years later
Crashed my m235i awd but ima salvage the guts and do this instead
Brate, pa ti si doktor. 😊 Svaka čast. 😊
Awesome bro 🎉, congrats 🤘🏽
👏 awesome.. love the swap but i love the seatbelt idea more 😉
Seatbelt idea?
You are my spirit animal.
Imagine b58/48 in e36!!! OMG that would be insane!!!
awesome video
HakenE30. Is this HakenTT? Also: respect to the work you put into this E36. I wouldn't even try to do something like this. The electronics alone ...
You and I have the same car ideas I like your style
Great video! Just curious to ask if you/anyone knows/thinks if there’s an alternative to moving the p/s rack? Thanks
Brilliant !
Well done sir.
I wish i had this on my 318
That’s insane 👌
Respect man! Nice Build! I wanna build a similar build! But using an F30 6speed manual donor car! Any tipps?
@HakenE30 your videos are invaluable as I am just about to attempt and I repeat attempt an N55 6spd Auto Engine and Trans swap into a 1998 Z3. I have a complete working 2010 E92 335i Donnor car. I would love to hear your thoughts about a few points as I also intend to transplant all E92 harnesses, Dashboard and Steering Wheel. This leaves me with a way to overcome the DSC communication issue with the Rear end and Front Brakes etc. I am in Australia so both cars are Right Hand Drive.
DSC won't work because trigger wheel design is too different to make it work.
@@HakenE30 thank you for the reply. I have decided not to proceed as there are too many differences.
impressive
hey, i have an e30 and I'm thinking about swapping an n20 engine, the 4 cylinders, do think that it will be hard, and also what engine mounts would you recommend
18,50 kvacilo na remenici alternatora,cuva pk remen i sistem natezaca.
there is lsd differential
How did you gain this knowledge
316 swaps forever!!!
well done very detailed.i swapped in n55 in my 328i e90 got n54 engine harness and dme how do i program dme to car?
how come to make abs sensor e90 works with the knuckle e36 stock sir , i just wanna know
Beautiful work. I have a F30 n20 I’m looking to swap a n55 or N54. Any pointers or suggestions
I know this vid is bit dated. But I would like to pick your brain. I want swap m62tu out of my RR L322 with n55. Its basically e53 x5. Im trying to gather CAS DME situation vs Cluster vs use of Zf5hp. L322 has 2 speed case.
Is this thing still kickin? Can we get an update.. this looks like a fun swap i have a n55 coming out my x5 soon n i wanna throw it in a e36 shell. Would the xDrive be an issue?
I sold the car, but it is still around and running, problem is that N55 is not going down in price because people tend to blow them up, so they are in short supply always
Good job man 👍
That motor mount eventually gonna sag and lock your wheel
7 years later, it still works fine
I see you extended you subframe to fit your mounts but can you just install the mount turned like you showed ? Or you absolutely need to extend the subframe? Thanks
well done man...
Would this work if you pulled the engine from a 2011 x3 35i, by the way this was an amazing video helped me out a ton.
Nice car 🚘
the stupid part is this engine fbo on e85 with a real tune can do 450 safely. This car at 450 is going to fucking slay.
is this cheaper than reliably boosting a 328i ?
perhaps the next video will show how you swapped the engine with a full EV motor? Thanks in advance! 😍
How much would you sell this for?
Is this a realistic swap to try for my first time ?
How do u connect the DCT to it ?
WOW 🤩
Hi I have n52 all magnesium engine off a 2007 528xi. Same 318ti. Will this configuration work? Any help would he appreciated 👍
have you ever figured out if that would work ?
What is the weight of the car, on 380 ps this is a monster
About 2900 pounds
DR. FRANKENSTEIN’S “ SLEEPER ⚙️🛠⚙️380 HP MONSTER “ 💻👍🏻🤪
The intro 💀
so next thing big turbo setup
What kind of modifications will I need if using a e36 m3 manual transmission drive shaft ?
no mods, it fits
About how much did you spend on this cost? Sorry if you said this in the video already.
great work! , its been 2 years is there and toubles with your car ? if i do this to my f32 will i have any issues im driving it daily ? i want to upgrade to b58
it is all still good, but I sold the car.
@@HakenE30 thanks for reply
I guess this will be the same as n54
Do you have a shop were I can take my car too?
E36 owners will do anything but buy a bigger engine car and safe all the energy ( i am one of them )
great work. What do you mean with my coding? what do you have to code (reprogram) that it will run? thxx
you don't have to code out anything. I just coded it to make it even better
@@HakenE30 I'm looking to to an n54 swap in the future and have watched your original video years ago now for this swap.
Amazing work. I am curious how you did the instrument cluster and coding wise what you did to make it better? If you could be so kind to explain ? Or upload a video ? 😁
Hello! Recently saw this car for sale and was wondering if you could answer some questions for me!
yes, where do you see it for sale?
Hi i need you help me please i ve one bmw e36 and i instaled swap engine N20 and transmicion automatic
do it
Hi Haken,
Great Car. I‘m thinking about a N54 Swap.
Wich Engine Mounts/Brackets do you have used.
They Look like the Original from the N55/54.
And have you take it from the 5-series E60 or
3-Series E90
Greets from Germany M
Mario
z4 n52
@@HakenE30
thanks a lot for your answer.
it looks as if the bracket fit very well on the e36 front axle carrier.
at least on the driver's side
or did you have to weld a lot?
How can i get your account if you can just send me wich parts should i replace. To make it done
Hey can you remember what flange you used on the end of the transmission
one from 2006 Z4 with N52
@@HakenE30 you da man thanks
Hello Haken,
I have one more question.
how did you solve the problem with the transmission immobilizer?
Greets Mario
no
straight sleeper
how do you check the oil level
with diagnostic tool
why you choose the N55 for the swap?
cheap and easy
I want these old M44. Do you trade these?
yes
Is this similar to N54 swap ? Any modifications to the subframe ?
it will be the same if you run the single turbo on N54
What differential did you use?
Little big Man.
bro what year are you in? 1995????
how much did it cost to do the whole swap?
1k
Hi, how can i contact with you?
here
@@HakenE30 i need to talk about swap. I started n54 swap to my e46. Do you have email or whatsapp ? I need some your help and advice.
It is not cheap and easy...
it is, compared to LS swaps
hey mate do you have a way for me to contact you? have a few questions i can flick you some $ for your time if possible
How can I get in touch with Haken? Can you share your email / Instagram account thanks!
why
How can I get in touch with Haken? Can you share your email / Instagram account thanks!
forums