Good a video I have same codes in my 04 corolla 😢 I replaced 2 times up and down oxygen sensors. And another parts a d still aparear the same codes maybe this is the latest part I. Need to replaced
Thank you for posting this... my 2001 Lexus ES300 has a P0442 error code stored on the computer but no check engine light is on. I reset the codes, and replaced a cracked EVAP hose. Hopefully the P0442 code goes away. I also get a lot of white steam from the exhaust on cold start, only for the first 25 seconds. Do you think an EVAP hose leak would cause this?
I have check engine light on and comes up with p0441(EVAP System Incorrect Purge Flow) and p0455( EVAP System Leak Detected large leak). I did notice in last few weeks that car's milage had dropped and could smell fuel vapor inside the car if I keep it running (not driving) for few minutes. Smell would go away once I start driving. Could a bad gas cap be causing above issues? I was thinking to start with that solution. Appreciate the help. Thanks in advance!
Buddy For large leak it cannot be gas cap. You have to do a smoke test to find the leak. If you don't have smoke machine then you have to take it to your machenic to do a leak test. Good luck.
You applying the smoke to the wrong place. Right next to where you plugged it in ..see the GREEN cap ? open that and remove the left hand thread schrader valve and plug the smoke in there. That's what it's for.
I know exactly what you are talking and I know but what you didn't know is my after market smoke tool doesn't have fitting cap so it useless to do the way you talk about. There is no right or wrong way to do smoke test as long you can find a leak and repair it that all.
Did it pass inspection? MY V6 Camry has P1130 thus replaced air fuel ratio sensor. Now check engine light come on and off every 50 miles cycles. When check light comes off, it cleared all monitor status except EV (EVAP). Debating on getting a smoke tester or just the Vacuum Switching Valve. Remove the gas cap, no P0441 - just the same P1130, strange.
When the light came off (no light) pass all emissions except won't clear EV, still flashing. After about 50 miles engine light will come back on. Will it pass if no light but only EV flashing?
Hi... I can not connect with ecu on my 2005 Toyota Corolla Altis 1.8... when it try to connect to ecu the abs light start blinking... Each and every time... I tried different odb 2 devices and many apps on mobile device too... And same devices connect with my 2010 Toyota Corolla 1.3 very easy... Will you help me plz
I'm not sure i my answer can help you but try to check any broken fuse. Some time broken fuse in the fuse box can cause obd2 can't read it. Good luck on your repair.
Nice work straight to the point, no b.s.
Thanks for the video! Neat trick with the 9V.
Excelent diagnostic
Good a video I have same codes in my 04 corolla 😢 I replaced 2 times up and down oxygen sensors. And another parts a d still aparear the same codes maybe this is the latest part I. Need to replaced
Thank you so much for this video متشکرم
Excellent diagnosis.
Going to try that 9 volt test
excellent video. Thank you Sir. Im going to give this a try
Good luck to you buddy
It's a solenoid. on/off. Normally closed.
Very good job those P44x codes are so annoying to find and diagnosis .....
Can you tell me the part. NUmber please 🙏
Like!
What's the name of the song at the end?
Thank you for posting this... my 2001 Lexus ES300 has a P0442 error code stored on the computer but no check engine light is on. I reset the codes, and replaced a cracked EVAP hose. Hopefully the P0442 code goes away. I also get a lot of white steam from the exhaust on cold start, only for the first 25 seconds. Do you think an EVAP hose leak would cause this?
Cross finger good luck and thanks for stop by
If it's really cold, then yes, it's normal for white smoke to come out of the exhaust since more fuel is needed to start the engine.
What is the name of the sensor you replaced? Tnx and great video
Vacuum Switching Valve - VSV
@@kimchee94112 Evap Purge Solenoid
purge solenoid.
I have check engine light on and comes up with p0441(EVAP System Incorrect Purge Flow) and p0455( EVAP System Leak Detected large leak). I did notice in last few weeks that car's milage had dropped and could smell fuel vapor inside the car if I keep it running (not driving) for few minutes. Smell would go away once I start driving.
Could a bad gas cap be causing above issues? I was thinking to start with that solution.
Appreciate the help. Thanks in advance!
Buddy For large leak it cannot be gas cap. You have to do a smoke test to find the leak. If you don't have smoke machine then you have to take it to your machenic to do a leak test. Good luck.
@@alltsab Thank you so much friend for the feedback. Hoping it is not very expensive to fix it.
@@tealpaintbrush1797 you very welcome buddy
You applying the smoke to the wrong place. Right next to where you plugged it in ..see the GREEN cap ? open that and remove the left hand thread schrader valve and plug the smoke in there. That's what it's for.
I know exactly what you are talking and I know but what you didn't know is my after market smoke tool doesn't have fitting cap so it useless to do the way you talk about. There is no right or wrong way to do smoke test as long you can find a leak and repair it that all.
@@alltsab yo suck
That one is left hand thread requires a special connector. Who is selling it?
Which gas is better for 2007 corolla 87 or 89?
Anything higher is better but 87 is good enough for that car
what is the name of the sensor you changed at the end
I'm not sure what the name of it but you can search the number of that sensor in Google it should pop up. Thanks for watching
What is the name if the smoking machine?
No name of it. Just home made smoke machine
Did it pass inspection?
MY V6 Camry has P1130 thus replaced air fuel ratio sensor. Now check engine light come on and off every 50 miles cycles. When check light comes off, it cleared all monitor status except EV (EVAP). Debating on getting a smoke tester or just the Vacuum Switching Valve. Remove the gas cap, no P0441 - just the same P1130, strange.
Yes it pass
As long you don't have engine light and all the emissions complete then you shouldn't have no problem to pass the emission test.
When the light came off (no light) pass all emissions except won't clear EV, still flashing. After about 50 miles engine light will come back on. Will it pass if no light but only EV flashing?
Hi... I can not connect with ecu on my 2005 Toyota Corolla Altis 1.8... when it try to connect to ecu the abs light start blinking... Each and every time... I tried different odb 2 devices and many apps on mobile device too... And same devices connect with my 2010 Toyota Corolla 1.3 very easy... Will you help me plz
I'm not sure i my answer can help you but try to check any broken fuse. Some time broken fuse in the fuse box can cause obd2 can't read it. Good luck on your repair.
2005 corolla have a recall on the ECM. did you see if you are on the recall?
And they wanna charge me $1400 for this at Toyota, smh
Wow
Guy spends 20 years learning how to fix cars, you bet your ass hes gonna charge you 1400 for this.
And how much do you think you should be charged?
@@Turismo860 a shop would charge about $150 plus parts for this