The technician changed the canister and solenoid for my Avalon 2000. But after few days driving, p0440 came back on again. For sure I will check the fuse box tomorrow morning. I hope it will be the case. Again, thanks for your video.
P0440 alone can be a variety of issues which makes it very hard to diagnose without a smoke machine. Also vehicles vary. For example Chrysler is a lot different to diagnose vs Toyota because their systems have different layouts/design.
The canister/vsv does not have any shielding under toyotas. my guess is maybe water got in the connector and bridge the pins causing a short. but those connectors are supposed to have a little waterproof gasket in them
Thanks for the detailed video man - I’ve been searching how to fix these codes for my 02 4Runner, it makes sense to test the solenoid and fuses. I will figure this out!
Update: was able to fix my car, clear the codes, and not get them again once I tried running the codes a second time- found a hose with a slash in it next to the evap solenoid that just needed to be cut and re-hooked up 🙏🏽
I have EVAP codes on my 2000 Toyota Camry I smell gas from inside the car after I fill up the gas or sometimes while driving.. Please assist. Been having EVAP codes for 5-6 years. Already changed a few parts.
michael morgan Yes with the ignition on the position on with the engine off. The engine doesn’t have to be warm-up all you doing is checking for voltage leaving the switch on the on position that’s all you need.
At the end of the video you tested the purge solenoid I have a New one but I cannot locate where it is. Would you please tell me where to find it. I looked and looked but none of my solenoid look like that. Does the canister have more than one solenoid on it?
Tengo codigo p0446 ya le canbie el charcoal canisters ya que tiene todos los sensores pero me vueve la luz con el codigo p0446 cual cres qie sea el problem tengo un Toyota corolla 2001
The grace and peace be with you from the lord your God our father and his son Jesus thank you, but how many of you know about the good news repent and believe in the gospel because the kingdom of heaven is at hand and crack your word the Bible and continue blessing! Luke 6:20-28-35-40-41-44-46-47-48-49 10:25-27-37 Matthew 5:17-48 6:9-15-21-27-33-34 10:6-12-22-28 11:613:36-51-58 John 1:13:3-15-18 4:21-24 5:39-47 Mark 1:14-15 7:10-20-23 8:2-3 9:1-40-50 10:18-19-45 Acts 2:38-39 7:54-56-59-60 Romans 10:9-10 1Corinthians 15:48-58 Ephesians 6:1-12
The technician changed the canister and solenoid for my Avalon 2000. But after few days driving, p0440 came back on again. For sure I will check the fuse box tomorrow morning. I hope it will be the case. Again, thanks for your video.
i work on classic italian cars. and you are a very mechanic,,no short cuts, follow the steps.. very good
P0440 alone can be a variety of issues which makes it very hard to diagnose without a smoke machine. Also vehicles vary. For example Chrysler is a lot different to diagnose vs Toyota because their systems have different layouts/design.
It's never easy making these videos. Appreciate all the hard work, never thought it could be a blown fuse.
Good job on the vid bro. Very well explained in detail. Praying mine is that easy 👍
These fuse saves me $$$ on smog check, thank you boss
Whatever blew fuse will likely do it again ?
Keep up the good work Rey.
i think this is what's wrong with my car!! thank you for going through these steps!!!!
Mucho respeto; much respect brother !!!
I like your process. I have a recurring emmission code, and will follow your lead.
I checked my system. That little green cap for EVAP control system test port was loose as heck. Tightened down. No engine light. Whew.
I guess the green cap isn't its fuel line
im gonna check my fuses. hoses ect. thx for video.
A fuse blows for a reason. Very rare for a fuse to be "bad" itself but if it fixed the problem long term then I guess it was a bad fuse.
The canister/vsv does not have any shielding under toyotas. my guess is maybe water got in the connector and bridge the pins causing a short. but those connectors are supposed to have a little waterproof gasket in them
Thanks for the detailed video man - I’ve been searching how to fix these codes for my 02 4Runner, it makes sense to test the solenoid and fuses. I will figure this out!
Update: was able to fix my car, clear the codes, and not get them again once I tried running the codes a second time- found a hose with a slash in it next to the evap solenoid that just needed to be cut and re-hooked up 🙏🏽
I have EVAP codes on my 2000 Toyota Camry
I smell gas from inside the car after I fill up the gas or sometimes while driving..
Please assist. Been having EVAP codes for 5-6 years. Already changed a few parts.
good video, hope the fuse is my problem also
well hells bells, p0440 gone now after replacing that EFI fuse....
Did the fuse end up blowing again or did this fix last?
Excellent , good info Rey.
i want one of those beeper testers.✅🏁
Gracias voy a revisarese fusible ya le canbiie el tappn de el gas
Most excellent
Beautifully explained. Thank you so much.
Thank you. Very good trouble shooting. What was the fuse tester that you were using that beeps?
Its called a Power Probe
Can I bring you my car to you
Good video. Very helpful.
Thank you Soo MUCH!
Nice thanks
Ty
When you tested for voltage was the car warmed up and the ignition on? Thanks
michael morgan Yes with the ignition on the position on with the engine off. The engine doesn’t have to be warm-up all you doing is checking for voltage leaving the switch on the on position that’s all you need.
Good Job my Friends 👍
Buen video,😊
I have a 2000 Camry. I cant find the Evap fuse. Any ideas?
He tested all the fuse.
gracious
At the end of the video you tested the purge solenoid I have a New one but I cannot locate where it is. Would you please tell me where to find it. I looked and looked but none of my solenoid look like that. Does the canister have more than one solenoid on it?
The solenoid tested in video is physically connected to the canister bracket itself.
Tengo codigo p0446 ya le canbie el charcoal canisters ya que tiene todos los sensores pero me vueve la luz con el codigo p0446 cual cres qie sea el problem tengo un Toyota corolla 2001
Lo que dice el que chequees el fusible EFI NO 2 con 7.5a. En otro video dicen que tambien inspecciones la tapa de gas.
👍🏻👍🏻👍🏻
what is the fuse for a 2001 ES300.. ?
Same engine as in video.
i think mine is a 10amp.
The grace and peace be with you from the lord your God our father and his son Jesus thank you, but how many of you know about the good news repent and believe in the gospel because the kingdom of heaven is at hand and crack your word the Bible and continue blessing! Luke 6:20-28-35-40-41-44-46-47-48-49 10:25-27-37 Matthew 5:17-48 6:9-15-21-27-33-34 10:6-12-22-28 11:6 13:36-51-58 John 1:1 3:3-15-18 4:21-24 5:39-47 Mark 1:14-15 7:10-20-23 8:2-3 9:1-40-50 10:18-19-45 Acts 2:38-39 7:54-56-59-60 Romans 10:9-10 1Corinthians 15:48-58 Ephesians 6:1-12
He said p0441 and it is p0440
He corrected himself in the vudeo dude.
1 sew dafxd