2019 Subaru WRX C-Light Install
Вставка
- Опубліковано 12 вер 2024
- In this video we remove the headlight, paint the housing and install the Diode Dynamics C-Light on my 2019 Subaru WRX
Parts:
Diode Dynamics C light
Morimoto RetroRubber OEM Grade Butyl Headlight Sealant, Black
Quick Connect Clips
18gauge Wire
Music
------------------------------
Breeze by MBB / mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2PFncFB
Music promoted by Audio Library • Breeze / Fantastic / F...
------------------------------
Fantastic by MBB / mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2PD28zL
Music promoted by Audio Library • Breeze / Fantastic / F...
------------------------------
Fresh by MBB / mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2PK8m0A
Music promoted by Audio Library • Breeze / Fantastic / F...
------------------------------
Follow me for the latest updates
Instagram @leugarage
When you said it was hot at 88 degrees I wanted to cry in Californian ! We’ve been in triple digits for weeks
Yeah I guess I can't complain but NY humidity level is typically above 65, oof. This is why I like to work on cars in the fall lol
Followed this vid exactly and just completed my install! Thank you for this!!!!
Loved the video man! Just picked up my 2019 wrx a couple weeks ago
Hey man, just reaching out to see what you think about your 19’ WRX. Any advice or recommend mods you could share to a new “used” 2019 WRX. Thanks in advance, take care!
One of the best install vids I seen so far👍
Hey man, great video! I also saw your other video on the fog light bezels install. I'm looking to do both the c-lights and the bezels too. Do you have both of them as DRLs? If so, Do you have both of them hooked up to the same DRL harness? Or are the c-lights hooked up with the Diode Dynamics DRL harness and the bezels hooked up through the fuse box? Thanks!
skeurton hey, I do have both as drl. The c-light is hooked up to the diode dynamics drl harness and the bezel is hooked up through the fuse box. Both work perfectly and no issues.
Perfect, thanks for the info!
Hey, just installed mine yesterday, was wondering if you knew if the t taps that were included with the kit were water proof because I heard that they have been known to cause problems. Not to sure but wanted to see if you had any opinions on it.
Thanks
Hey, I'm not sure if they are water proof but then again I don't think I have ever seen a water proof t tap. Sounds like a gimmick a manufacturer would use to charge you more but hey I could be wrong. I have had these t taps on the car for probably a year now and it has gone through the 4 season in NY and I don't have any issues. I think you will be good with the ones the kit comes with.
Where did you end up hiding the modules?
hopefully i can get a reply, and im sorry if this is a dumb question but would this process work on a 2018 wrx base model?
Hey, yes, the premium and base have the same lights so it will work for the base as well
@@leugarage6327 thank you friend
What app do you use for the diode dynamocs egg?
Rgb?
Nice man!!!!
Can you remove the original signal light after installing that C Light? Like just having the C light and as a turn signal.
Yes you can but you would need to scanned the bulb or change the bezel
How did you connect the turn signal (yellow wire) with the blue wire?
I ran a seperate wire with t-taps to connect the 2 wires together.
How did you get the high beam from turning on on parking light ?
Hey, not sure I understand but if your high beam is turning on when the park light is on then the wrong wires were connected. Double check to make sure the correct wires were connected to the correct factory harness (per the c-light instructions).
This one isn’t working... :(
That can is it paint and primer in one?
Yeah, I did primer then the paint only to realize the paint I was using was a paint and primer. Whoops lol
@@leugarage6327 Did you prep or lightly scuff the surface before spray or just straight sprayed it on there?
I just sprayed it. Alot of people recommend scuffing the surface but I figured if the primer didn't mess up then I would be good. It worked out for me.