@@andrewgarcia1630 The entire modding community is awesome. These two are great because they fully acknowledge and credit the wider community where appropriate. Not all creators on UA-cam are so open or take the time to do that.
Look at that, two years later and the tutorial stands as the definitive guide. Nice work dude, RGH worked like a champ and now my console is modded. Thanks!
Finally got my first RGH 3 booting perfectly!! Thanks for getting me into the hobby of soldering I never knew I would have so much fun learning how to work on a circuit board!
doing this tomorrow, just picked up 2 jaspers and 2 falcons cheap, cant wait, thanks alot for this video i used to watch your jtag tutorials back in the day, going to watch your updated ones when im setting up my new rgh3 consoles :)
8:05 while this method to open the console does work, I would still recommend unclipping them with a removal tool. not only does it feel like you are breaking it, if you do it too fast, you WILL break the tabs off, which means you won’t be able to put the case back on.
*for, I really need to start proof reading more before I post..... Also, loved the video, gonna dig my old Jasper out, not modded aside from running LT+ 3
I have a Jasper white Xbox 360 and always wanted to mod it. Thank for this awsome video. It gave me the courage to do it because of the great details and explaining.
I had never done anything like this before, but with the help of your video I was able to get my console RGH'ed, it boots instantly and works flawlessly, I was honestly so surprised I managed to do it. Excellent video thank you!
Several days ago I've modded one fat and one slim xbox 360 with this method. I hope I will get some new valuable tricks from this video. keep up the great work. :)
Thank you very much for this tutorial! This new method is WAY more accessible than the older ones for beginners like me. I also followed MrMario2011's tutorial for the Trinity, then you mentioned his tutorial and it all came full circle :)
my guy I'm so glad to see you and Mr.Mario posting these videos if it wasn't for MrMario i wouldn't have my rgh and if it wasn't for you i wouldn't have been able to set up my console so thank you guys very much (slim consoles only usually only have 27mhz dont worry its normal for anyone questioning why)
I'm not sure if you know this Modded but once xell is flashed you no longer need the nand reader attached after you flash xell as xell can flash through usb so if you write xell build the upd.bin you can put it on root of usb and it will flash it after approx 15 seconds or at least that's how i did my trinity's
@@OmnusNight Yes, it uses rawflash which can flash the nand without a hardware flasher. I've used that many times to fix consoles with corrupted nands where Xell was still bootable.
@@MODDEDWARFARE see now that I didn't know I didn't know it could flash a corrupted nand only that it could flash from usb so thank-you for teaching me something new
Second attempt successful, the first one I killed.during the process. You go through it all very fast ! Thanks for the help, it really helped. Ps: from the first attempt to second attempt the biggest change was that I bought a Weller soldering station. The first attempt was with a cheap Ali Express piece of crap. Thanks Weller.
Hey! I just finshed my first RGH3 on my 512MB Jasper. Your guide was super helpful. I took to 2 tries to get the wiring right, but now it instaboots and is super stable. So much thanks for your great guide!
@@dasmikko thanks I read that somewhere online 10mhz and without a diode? maybe 27mhz is too much for those with 512mb as video here shows 27mhz for tiny 16mb. Did you use smt resistors and diode? 22k?
@@modbox9560 I've read mixed things about the diode. Some say it's required, others say it works without. Resistor wise, i use regular resistors at 22k ohms.
@@dasmikko So I can't get it to boot xell using diode 4148 and 22k resistor I tried reflashing to 10mhz it just turns off right away can keep repeating but if I flash back ecc 27 it just sits there flashing no display any takes??
Still not a simple task with the 360's ey. Great guide, you are indeed on top of everything mate😊 Well done 👍 Will be waiting for your guide modding a 360 slim😁
Thanks for the guide man, today was my first time doing an RGH. I struggled a bit with getting the wire connected to PLL but other than that, was a great process and fun! And to top it off, i got instant boot times! I also changed out the LED's on the RF board to blue. :) Thanks again man
Hi, Fyi you should point it at releases/latest , that way you won't be linking only 3.1.4 Also, run as administrator is no longer required. I have also fixed the high DPI displays bug, the fixed version will be released shortly to auto-update
Hi ! You dont show anywhere what you do with the diode and the resistor : where they connect, and what is the polarity to use when soldering the diode ?
Thanks for this guide. I just successfully RGH'd a Falcon. A word of caution for first timers - pay close attention to the RGH wiring. My console wouldn't boot properly after I did the RGH wiring. A quick tweak of the wiring layout and it boots fine now.
Idk if this is the right place to ask this, but is there any other place in the motherboard i can connect the ground wire (yellow wire in the pico diagram at 11:49)? Because that pin just doesnt wanna stick to the solder, all others worked no problem. pls
Great Vid.👍👍👍 I Just strongly do not recommend the "opening like a suitcase" part at 08:08. Be patient, take your time to open it, otherwise you are very likely to break it.
Thanks, but I strongly disagree about the case opening part. I used to do it the "safe" way of going at each clip one by one with a flathead or pry tool but always ended up causing more damage that way. So you're actually less likely to cause damage if you use the method from the video. However, there is a dedicated tool you can use that lets you get all clips at the same time. That's going to be the best option to cause the least amount of damage possible.
7:12 oh yeah the clips are just supposed to pop off? mine busted and i basically just had to break the side pannel off because the clips werent detaching, just my luck
Great tutorial! You inspired me to learn how to solder. For the Pico, can I just solder on any 30 gauge wire to each of the corresponding points? Or do I need to buy a nand reader cable?
I recently decided to mod my xbox 360 after seing this video. After I had put the resistor and the diod on the back I went to turn the console on to get the cpu key. I put everything on that was needed and when I pressed the start button everything was going fine until it flashed 3 red lights at me. Is the console completly destroyed or can it still be salvaged.
I have my xbox falcon for about 12 years i never have no problem whit my jtag becouse i see your tutorial , im thinkng to another xbox slim Rgh the processo you have done to you tutorial thanks for you tutorial you rock Yoooo
what a great video, followed your instructions, and wow, i got my xbox rgh, one thing though, for some reason the Xex Menu v1.2 did not work for me, i made sure of creating the folders, formating the usb, but no, i ended up using Xex Menu v1.1 (live) , and that one did work. thanks a lot for the video !
picked up a Falcon Xbox 360 recently because of this video, i will follow this video guide and update this comment soon edit 1: just dissasembled my 360. it looked pristine. im still waiting on the parts to arrive tonight edit 2: screwed up. my bad soldering iron caused me to rip one of the pads off during the nand soldering process
I tried the rgh 3.0 hack after creating and writing xell to the nand it killed both my xboxes I've been left with 2 dead xboxes thanks to you and Mario you didn't say after writing xell to nand it needed to be unplugged you didn't mention that so you and him have left me with no xbox at all you haven't covered the hack properly due to col I can't get another THANK YOU VERY MUCH
Ohh man you remind me of the good old times!! Trinitys and coronas were pain in the ass using rgh 2.0 playing with the cable lengths using the glitcher.. 🤣🤣
i have this problem: i dumped my nand and tried booting in xell. my xbox wouldnt boot so i reflashed my nand backup and it still didnt boot. so i unsoldered the wires for xell and it booted normally. now i try to detect my xbox to boot xell again and it says "no console found". i resoldered my wires they are clean. and it still says no console found. i even resoldered the wires for xell but still nothing. why isnt it working anymore?
@@kjsiri4285no, im doing it today again and i keep getting wrong version. so my guess is that the soldering is shit. or the ground (yellow). i keep resoldering it aometimes it gets better sometiems worse. im also modding a slim which i got 2 dumbs of the nand waiting for my postfix. go with a slim easier.
If someone's falcon doesn't want to boot after installing xell, let them install a 10k resistor... mine didn't want to boot with a 22k resistor and with 10k it was insta boot.
I can’t find the clear fan duct anywhere. Every site I look for them shows that they’re out of stock as of 12/9/22. Same goes for the clear-colored ones as well
thanks for your help about the usb problem i was having! i've run into another one... 😅 if xflasher doesn't show up in jrunner, after i've soldered the wires to the motherboard spots, does that mean my soldering isn't good enough? could i have possibly burnt a solder pad beyond use? i ask because i've tried attaching them a few times. and i've completely cleaned up burnt flux and tried soldering again, but xflasher still won't show up in jrunner. and yes i've installed the drivers, just like you did in the video. i have other boxes to try out in case this is broken (i was anticipating the first try not going smooth) but i want to make sure this one isn't salvageable before i rip open a new one.
For me, flash nand part was ok. But after, with more soldering, i think it is possible for amateur, but with lots of struggle. :D great job. Very interesting.
How to use Tl866II+ (XGecu) ? It does not have SPI per se. But it can flash NAND. And I've heard there is some adapter and some schema around. But image link from Reddit 1 month ago already gives 404 HTTP Error.
I went through the whole process all the way until the end and got the XeXmenu verified working and everything. I went to put the Xbox back together and now I can not get the Xbox to turn on for more than a second. I took it back apart and figured I broke a solder joint putting it back together. Sure enough I did, I got them all fixed up and I think they look better than the first time I did them when installing the RGH wires. My problem now is that I can not get the Xbox to boot up still. It will still turn on for just a second before shutting off, not showing anything on the screen. I'm not sure what has gone wrong. Should I redo all my solder work or is there something else going on now? Any help or ideas would be appreciated.
Try out the other JR Programmer drivers available, I used the auto installer which you can find on Google. Should work for previous versions of windows
Great video 👍 I’m having a little issue. Installed j runner w extras and installed the drivers for the xflasher as well but when I open jrunner while having xflasher plugged in and set to spi mode it doesn’t show up in jrunner.
Looking for an beginners USER guide. I can only find videos of the hardware side. I’m trying to understand how to use one I bought off eBay. I want to know the ends and out of running the RGH3 software side and how not to get banned etc.
Hello. Which one of them should the 1n4148 diode be used? There are several types of diodes that differ in characteristics. There are diodes with different mA numbers. What characteristics should there be?
It's just a Precision Gold A55KJ Digital Soldering Station. If I was going to buy one now I would most likely go with some sort of Hakko soldering station.
Need some help if you're still online Followed your guide and now I get the flashing Xbox button on the front of the console Nothing shows on the screen Connected up my disk tray and still nothing I've rechecked all my soldiers and wiring and all is correct, bought everything you mentioned and I'm using the xflasher instead of the JProgrammer Help please
Part 2 video is out now: ua-cam.com/video/JdTSNord7bo/v-deo.html
is there anyone who sells these things nowadays? been so long i have no idea who still makes them.
@modded warfare can we hack zephyr motherboard somehow now?
Is there anyway you can tell me what size wires you use
You got a link to the diode and resistor you use in the video? I’m trying to find them on Amazon.. Excellent video by the way
i have a modded xbox LT 3.2 I BELIEVE. would the rgh work on my xbox?
Quite literally said "Aww!" out loud to the shout-out, thank you so much! A very worth return to form and awesome console mod to celebrate 300K!
Thanks, your Trinity guide is by far the most detailed of any RGH guide I've come across.
@Aidan Macgregor true
You two guys are awesome!
@@andrewgarcia1630 The entire modding community is awesome. These two are great because they fully acknowledge and credit the wider community where appropriate. Not all creators on UA-cam are so open or take the time to do that.
Two legends in one place 💜
Look at that, two years later and the tutorial stands as the definitive guide. Nice work dude, RGH worked like a champ and now my console is modded. Thanks!
this dude is the true definition of a man dedicated to his work 👏👏👏
thats why we love him 😊
And that’s why he’s beat the school system, self made
Finally got my first RGH 3 booting perfectly!! Thanks for getting me into the hobby of soldering I never knew I would have so much fun learning how to work on a circuit board!
This dude is the first man that shows you step by step every bit
doing this tomorrow, just picked up 2 jaspers and 2 falcons cheap, cant wait, thanks alot for this video i used to watch your jtag tutorials back in the day, going to watch your updated ones when im setting up my new rgh3 consoles :)
I'm doing one soon. any advice?
Man does this take me back! You definitely deserve all the love mate, taught me a lot of stuff.
Did you txt the number? Is this a scam or did he get hacked?
8:05 while this method to open the console does work, I would still recommend unclipping them with a removal tool. not only does it feel like you are breaking it, if you do it too fast, you WILL break the tabs off, which means you won’t be able to put the case back on.
Broke a tab doing this, but it was minor enough to superglue fix. Old plastic.
Congratulations on the 300k, well deserved! You've taught us so much and fir that I thank you
*for, I really need to start proof reading more before I post..... Also, loved the video, gonna dig my old Jasper out, not modded aside from running LT+ 3
I have a Jasper white Xbox 360 and always wanted to mod it. Thank for this awsome video. It gave me the courage to do it because of the great details and explaining.
Finally modded my Falcon Xbox and this tutorial was a life saver. Between this and the Xbox Modding discord, it's been an amazing journey, thank you!
Does it still work, RGH3 is known to stop working after time
I had never done anything like this before, but with the help of your video I was able to get my console RGH'ed, it boots instantly and works flawlessly, I was honestly so surprised I managed to do it. Excellent video thank you!
A 360 video ! That made me smile . You are finally back making those . Love you bro
Several days ago I've modded one fat and one slim xbox 360 with this method. I hope I will get some new valuable tricks from this video. keep up the great work. :)
is this method the same with the slim ???
@@jagopes5117 no
Just did this on a 360 a friend gave me, a bit hard not gonna lie, but in the end i made it. Thanks a lot for the insane tuto in depth. Love
Thank you very much for this tutorial! This new method is WAY more accessible than the older ones for beginners like me. I also followed MrMario2011's tutorial for the Trinity, then you mentioned his tutorial and it all came full circle :)
my guy I'm so glad to see you and Mr.Mario posting these videos if it wasn't for MrMario i wouldn't have my rgh and if it wasn't for you i wouldn't have been able to set up my console so thank you guys very much
(slim consoles only usually only have 27mhz dont worry its normal for anyone questioning why)
I'm not sure if you know this Modded but once xell is flashed you no longer need the nand reader attached after you flash xell as xell can flash through usb so if you write xell build the upd.bin you can put it on root of usb and it will flash it after approx 15 seconds
or at least that's how i did my trinity's
@@OmnusNight Yes, it uses rawflash which can flash the nand without a hardware flasher. I've used that many times to fix consoles with corrupted nands where Xell was still bootable.
@@MODDEDWARFARE see now that I didn't know I didn't know it could flash a corrupted nand only that it could flash from usb so thank-you for teaching me something new
Always been a GOAT at modding tutorials 👌 Pretty crazy how its done tbf the creators of the chips and programs are insane
Second attempt successful, the first one I killed.during the process.
You go through it all very fast !
Thanks for the help, it really helped.
Ps: from the first attempt to second attempt the biggest change was that I bought a Weller soldering station. The first attempt was with a cheap Ali Express piece of crap.
Thanks Weller.
Hey! I just finshed my first RGH3 on my 512MB Jasper. Your guide was super helpful. I took to 2 tries to get the wiring right, but now it instaboots and is super stable.
So much thanks for your great guide!
Did your console boot faster on 10 or 27mhz jas 512mb?
@@modbox9560 i believe i used 10mhz
@@dasmikko thanks I read that somewhere online 10mhz and without a diode? maybe 27mhz is too much for those with 512mb as video here shows 27mhz for tiny 16mb. Did you use smt resistors and diode? 22k?
@@modbox9560 I've read mixed things about the diode. Some say it's required, others say it works without. Resistor wise, i use regular resistors at 22k ohms.
@@dasmikko So I can't get it to boot xell using diode 4148 and 22k resistor I tried reflashing to 10mhz it just turns off right away can keep repeating but if I flash back ecc 27 it just sits there flashing no display any takes??
Still not a simple task with the 360's ey. Great guide, you are indeed on top of everything mate😊 Well done 👍
Will be waiting for your guide modding a 360 slim😁
I love this channel. The only man I trust for custom systems
Thanks for the guide man, today was my first time doing an RGH. I struggled a bit with getting the wire connected to PLL but other than that, was a great process and fun! And to top it off, i got instant boot times! I also changed out the LED's on the RF board to blue. :) Thanks again man
I am planning on getting a Jasper HDMI model 360 very soon, so I will be following this tutorial once I get everything I need to RGH it!
Thank you for this tutorial, time and effort, congrats on 300K
Hi,
Fyi you should point it at releases/latest , that way you won't be linking only 3.1.4
Also, run as administrator is no longer required.
I have also fixed the high DPI displays bug, the fixed version will be released shortly to auto-update
That exact fan your useing fryed one of my first Xboxes I have ever built
congrats for 300k and thanks for the video
Congratulations on 300k mark! You deserve way more
Hi ! You dont show anywhere what you do with the diode and the resistor : where they connect, and what is the polarity to use when soldering the diode ?
Thanks for this guide. I just successfully RGH'd a Falcon.
A word of caution for first timers - pay close attention to the RGH wiring.
My console wouldn't boot properly after I did the RGH wiring. A quick tweak of the wiring layout and it boots fine now.
I’m going to try it soon on a falcon. A little nervous for the RGH wires. What did you tweak, you think something was being shorted out?
Thanks
Very clear y concise and nice images. Extremely well done! Thanks.
Easy! Thank you for everything throughout the years
Used this to succesfully RGH my xbox, thank you man! :)
Great video....did a lot of these back in the day. Wish there was instruction like this back then
OMG OMG that a beautiful x360, mine jasper arcade on RGH and still running. nice vid bro
Köszönjük!
Thank you for that generous donation. I very much appreciate it!
Idk if this is the right place to ask this, but is there any other place in the motherboard i can connect the ground wire (yellow wire in the pico diagram at 11:49)? Because that pin just doesnt wanna stick to the solder, all others worked no problem. pls
Great Vid.👍👍👍 I Just strongly do not recommend the "opening like a suitcase" part at 08:08. Be patient, take your time to open it, otherwise you are very likely to break it.
Thanks, but I strongly disagree about the case opening part. I used to do it the "safe" way of going at each clip one by one with a flathead or pry tool but always ended up causing more damage that way. So you're actually less likely to cause damage if you use the method from the video. However, there is a dedicated tool you can use that lets you get all clips at the same time. That's going to be the best option to cause the least amount of damage possible.
7:12 oh yeah the clips are just supposed to pop off? mine busted and i basically just had to break the side pannel off because the clips werent detaching, just my luck
Great tutorial! You inspired me to learn how to solder. For the Pico, can I just solder on any 30 gauge wire to each of the corresponding points? Or do I need to buy a nand reader cable?
Yes, 30 gauge wire works fine on the Pico. That's exactly what I used.
29:54 You can also use google lens on your phone to copy the text.
8:15 ummm the suitcase didn’t work very well for me sir still picking up bits of plastic now 💀
Damn bro 😂💀
Thank you, man, your guide is a worker.
its just flashing the green light with no screen, what should i do?
Did you ever fix it?
I recently decided to mod my xbox 360 after seing this video. After I had put the resistor and the diod on the back I went to turn the console on to get the cpu key. I put everything on that was needed and when I pressed the start button everything was going fine until it flashed 3 red lights at me. Is the console completly destroyed or can it still be salvaged.
you solder worse than jan beta - but better than louis rossmann. all you 3 are legends for me. keep up the good work - you nerds ROCK!
I have my xbox falcon for about 12 years i never have no problem whit my jtag becouse i see your tutorial , im thinkng to another xbox slim Rgh the processo you have done to you tutorial thanks for you tutorial you rock Yoooo
what a great video, followed your instructions, and wow, i got my xbox rgh, one thing though, for some reason the Xex Menu v1.2 did not work for me, i made sure of creating the folders, formating the usb, but no, i ended up using Xex Menu v1.1 (live) , and that one did work.
thanks a lot for the video !
How do you fix a RGH not booting up like no picture when you turn it on do you know the cause of it ? Please
Finally some Xbox 360 content 😁
Could you attache link for the wire please need some good wire from the UK
at the moment my xbox wont boot after i install the RGH 3.0. The green led blinks but after few second the xbox went off :c
Did u fix it? Please help mine doesnt even turn on no led no fan spin nothing please help
Brilliant video! just a quick question....does pico flash work with J-runner with extras ? thanks
picked up a Falcon Xbox 360 recently because of this video, i will follow this video guide and update this comment soon
edit 1: just dissasembled my 360. it looked pristine. im still waiting on the parts to arrive tonight
edit 2: screwed up. my bad soldering iron caused me to rip one of the pads off during the nand soldering process
Can you make a video on how to resolve N-32046-5 Error. I can't for the life of it understand what it written on Google its so technical.
OOH
I LOVE WHEN YOU UPLOAD
Rgh xbox 360 does anyone actually still want one nowadays 🤔, still awesome stuff from all your videos. Thanks
Judging by the people still buying AppNet it would appear so.
Wow! Looks easy! Will definitely try this out when I order my pico :)
I tried the rgh 3.0 hack after creating and writing xell to the nand it killed both my xboxes I've been left with 2 dead xboxes thanks to you and Mario you didn't say after writing xell to nand it needed to be unplugged you didn't mention that so you and him have left me with no xbox at all you haven't covered the hack properly due to col I can't get another THANK YOU VERY MUCH
I did manage the rgh 3.0 on my slim but found out the heatsink had a snapped leg which died lastnight
Bro. What do you mean you didn't know it was supposed to be off? HE TOOK THE ENTIRE CASE OFF. and also Mario is Nintendo, not Xbox
As well as he said it several times
What the hell u talking about
Ohh man you remind me of the good old times!! Trinitys and coronas were pain in the ass using rgh 2.0 playing with the cable lengths using the glitcher.. 🤣🤣
Excellent video. Only one question: Is the resistor needed 1/4 Wats?
Yes, at 22k ohm
best explanation ever. even though english is not my mother language. thx a lot
i have this problem:
i dumped my nand and tried booting in xell. my xbox wouldnt boot so i reflashed my nand backup and it still didnt boot. so i unsoldered the wires for xell and it booted normally. now i try to detect my xbox to boot xell again and it says "no console found". i resoldered my wires they are clean. and it still says no console found. i even resoldered the wires for xell but still nothing. why isnt it working anymore?
have u resolved this yet?
@@kjsiri4285no, im doing it today again and i keep getting wrong version. so my guess is that the soldering is shit. or the ground (yellow). i keep resoldering it aometimes it gets better sometiems worse. im also modding a slim which i got 2 dumbs of the nand waiting for my postfix. go with a slim easier.
What AWG is the wire????
If someone's falcon doesn't want to boot after installing xell, let them install a 10k resistor... mine didn't want to boot with a 22k resistor and with 10k it was insta boot.
Is their a alternative point for the smc_post1 cuz mine fell off
I can’t find the clear fan duct anywhere. Every site I look for them shows that they’re out of stock as of 12/9/22. Same goes for the clear-colored ones as well
Can the RGH 3.0 mod be performed on my jasper xbox 360 arcade build date october 18th 2008 which has the built in flash memory?
Great video. Thank you for this tutorial.😁😁😁
Do you have a link for some cheap wire?
@MODDED WARFARE
Were do u purchase the LED fans and clear duct?
thanks for your help about the usb problem i was having! i've run into another one... 😅
if xflasher doesn't show up in jrunner, after i've soldered the wires to the motherboard spots, does that mean my soldering isn't good enough? could i have possibly burnt a solder pad beyond use? i ask because i've tried attaching them a few times. and i've completely cleaned up burnt flux and tried soldering again, but xflasher still won't show up in jrunner. and yes i've installed the drivers, just like you did in the video.
i have other boxes to try out in case this is broken (i was anticipating the first try not going smooth) but i want to make sure this one isn't salvageable before i rip open a new one.
dang this bring memories im still using your tutorial for jtag
Same here bro, felt old hearing him say jprogramers are irrelevant with windows ten
For me, flash nand part was ok. But after, with more soldering, i think it is possible for amateur, but with lots of struggle. :D great job. Very interesting.
ps4 9.3 or 9.5 jailbreak u should show us the legendary face behind this legendary chanel
How to use Tl866II+ (XGecu) ? It does not have SPI per se. But it can flash NAND. And I've heard there is some adapter and some schema around. But image link from Reddit 1 month ago already gives 404 HTTP Error.
I forgot to format the USB before soldering the RGG and JTagging, how big did I screw up?
I went through the whole process all the way until the end and got the XeXmenu verified working and everything. I went to put the Xbox back together and now I can not get the Xbox to turn on for more than a second. I took it back apart and figured I broke a solder joint putting it back together. Sure enough I did, I got them all fixed up and I think they look better than the first time I did them when installing the RGH wires. My problem now is that I can not get the Xbox to boot up still. It will still turn on for just a second before shutting off, not showing anything on the screen. I'm not sure what has gone wrong. Should I redo all my solder work or is there something else going on now? Any help or ideas would be appreciated.
Thanks for the tutorial, just want to know how reliable this method is compared to 2.1
What kind of wire do you use? The Raspberry Pi Pico doesn't come with a wiring rig like the flashers do.
Keep up the great work.
I accidently ripped out the solder pad for the SMC_POST1 point, is there anything I can do?
for the jr programmer, what if im on a pre-windows 10 version?
Try out the other JR Programmer drivers available, I used the auto installer which you can find on Google. Should work for previous versions of windows
Great video 👍 I’m having a little issue. Installed j runner w extras and installed the drivers for the xflasher as well but when I open jrunner while having xflasher plugged in and set to spi mode it doesn’t show up in jrunner.
I really like this video. But is the diode 100% necessary?
How come you can see your xbox drive in windows without a tool like FatXplorer? My machine doesn't even show the drive at all
Looking for an beginners USER guide. I can only find videos of the hardware side. I’m trying to understand how to use one I bought off eBay. I want to know the ends and out of running the RGH3 software side and how not to get banned etc.
Sir can i used Jumper Wire with this?
and the tools that needed is 2? Pico flasher and jr programmer only?
I'm having a problem after successfully modding everything went smooth but now the interface randomly freeze either in home screen or playing a game
Hello. Which one of them should the 1n4148 diode be used? There are several types of diodes that differ in characteristics. There are diodes with different mA numbers. What characteristics should there be?
Couldnt access Xell on Falcon board, tooj the diode out and it booted. IF your falcon board is not booting.
Quality video, thanks 👍
What soldering iron you using?
It's just a Precision Gold A55KJ Digital Soldering Station. If I was going to buy one now I would most likely go with some sort of Hakko soldering station.
hi modded thanks for the video, I would like to know what is the W of the resistor you used. thanks for your answer
I have an issue where my dvd key does not match what ive got on j runner any solutions to that ?
Need some help if you're still online
Followed your guide and now I get the flashing Xbox button on the front of the console
Nothing shows on the screen
Connected up my disk tray and still nothing
I've rechecked all my soldiers and wiring and all is correct, bought everything you mentioned and I'm using the xflasher instead of the JProgrammer
Help please
I'm still using a flashed xbox 360 online in 2022 lol
LT+3.0. Still undetectable. 😂
@@MODDEDWARFARE Yeah lmafo
@@MODDEDWARFARE is that a server?
Can someone explain the wattage for the 22k resistor. I feel like it definitely matters. Please someone get back to me ASAP
Looks like he just used normal 1/4w or 1/2w resistor. Dont really need big one for small current stuff. Hopefully @moddedwarfare can confirm though.