Big platter but with little twist
Вставка
- Опубліковано 6 кві 2024
- #woodturning #ash #creative
This time I used a different finish and went for creative colors by Odie's which really lovely fill the grain in this ash.
Hopefully you'll get something out of this video.
Thank YOU.
disclaimer- I'm profesional woodturner. Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Enjoy
_________________________________________________
MY LATHE
drechslershop.de/en/wood-lath...
STEINERT WEBSITE
drechslershop.de/en/?sPartner...
AFFILIATE LINKS.
NEUREITER and WOODCUT tools I use :
M42 BOWL GOUGES - neureiter.idevaffiliate.com/i...
SCRAPERS - neureiter.idevaffiliate.com/i...
CRYOGENIC BOWL GOUGES - neureiter.idevaffiliate.com/i...
WOODCUT PRO CUTTER - neureiter.idevaffiliate.com/i...
WOODCUT PRO ADVANCE - neureiter.idevaffiliate.com/i...
IRONS SHEAR SCRAPER - neureiter.idevaffiliate.com/i...
WOODCUT BOWL SAVER - neureiter.idevaffiliate.com/i...
________________________________________________
GURTOOL TOOLS
Bowl gouge - www.gurtool.cz/gurtool-pm-dut...
Spindle gouge -www.gurtool.cz/vretenovy-stru...
Calipers - www.gurtool.cz/hmatadlo/
Sanding pads - www.gurtool.cz/unasec/
_______________________________________________
www.tobi.si/en
CBN WHEEL
www.tobi.si/hr/CBN-brusna-plo...
BENCH GRINDER
www.tobi.si/hr/Stolna-dvostru...
DIAMOND FILE
www.tobi.si/hr/Arbortech-diam...
________________________________________________
disclaimer Methods that are shown works great for me and they are not only methods out there, if you find this or any other method not comfortble,please use some other way.
Thank you and enjoy - Навчання та стиль
You did a very great job of explaining how to make the platter!!! Thanks!!!
This guy makes it look so easy.
Hi Tomislav, as always your turnings are beautiful. What attracted me to your site are your explanations and processes, they are second to none! Greatly appreciated, thank you. Take care, Wayne
Thank you Wayne, really appriciate your support
Beautiful piece. You have to love the chatoyance of Koa wood.
Its ash wood😉
Fantastic finish. The white really shows the grain and emphasises the beauty of the wood. A very elegant platter.
Thank you
Salam sehat 2 selalu ya om ,,, 🙏🙏❤
Great teaching Tomislav.Stunning works of art.
Beautiful. good wood to work with.
I watched this yesterday but lost the video to comment so I have just found it and you have turned a beautiful piece of work, thank you for sharing 😊
Thank you sir
So I'm 6 seconds into the video and I already like it. "What I've got here is A BIG ASH BLANK". I didn't head "Ash" the first time around 😂
This is so beautiful. ❤
Such a gorgeous platter. Thanks for sharing.
Thank You for watching 🤗
Your explanations are so clear, (and in English, too- you put us natives to shame!) Thank you for showing us your skills
Ohh thanks, I have still a lot to improve in my English, but I'll get there ☺️
Beautiful piece and many interesting things to learn as always!
Thanks Joris
I love that
Really cool finish. I never thought of using a white pigment like that. The platter turned out really beautiful. Thank you for sharing.
Thank you, turn out really nice
Absolutely gorgeous ❤️
Another great project Tomislav! Your ability to explain how and why you proceed through the project is always so helpful … Thank you for all the time you dedicate to your channel 🤠🇨🇱
No problem Randy,thank you for watching
I really enjoy watching you work, Tomislav.
Thank you sir
First time watcher ,well impressed, looking forward to see more of your video's
Welcome to my channel, hopefully you'll like what you see... thank you very much
Very nice I like the white finish, it turned out great.
Beautiful!
Well I watch a lot of woodturners on You Tube but you are incredible what a beautiful bowl, nice one buddy.
Thank You very much 😀
Good explanation Master, thank you for that video
Stunning 👏
Beautiful work!!!!!
Magnifique travail sur cette assiette de toute beauté !
Merci pour tout votre travail de partage.👍👏
Thank You for watching 🤗
I really enjoyed this demonstration Tomislav - excellent woodturning skills. Forgive me for being personal but your video demonstration/presentation techniques just get better and better.
Thank you very much,there is always room to improve and I work on that but thank you for welcome feedback ☺️
Thank you Tomislav beautiful work calmly carried out with clarity and helpful explanation , look forward to your next one 👍
🕶very nice platter Tomislav. I really like the foot detail and the coloring. The way you turn is fantastic. Thanks for the time and effort.
Awsome Steven,glad you liked it 🤗 thanks for watching
WOW!You are an amazing talent. I have watched many people turn wood on UA-cam. The quality of what you do shines through and above all the rest that I have watched. Awesome it looks like the best of silk fabric.
Thank you very much 🤗
Great tips and the ash platter looks fabulous.
Thank you very much
Tomislav bonjour. Le bois est superbe ,le plateau et magnifique .C'est du lourd, bravo et merci du partage ,J'aime beaucoup.👍
Thank you very much for
great job and nice color .
Beautiful platter I 🤍that finish it’s stunning 😍
Thank you,glad you liked it
Tomislav that's a beautiful piece and professionally done thanks for sharing buddy 👍🙂
Thank You 🤗
Wonderful work, you are a master!!
Thank you, Im far from master,I still have a lot to learn
Looks great. I like the contrast that comes out of the grain. I think the extra detail you put into the base and rim make your work stand out.
Thank You very much,glad you liked it 🤗
Beautiful work. Clearly shown technique. Thank you. I too may have to emulate this piece.
Nice work Tommy
Love this project! A trick I have used on open grain woods is to make a slurry of Tung oil and rottenstone for after final sanding. It finishes and polishes at the same time and make the open pores pop. Thanks for the video.
Awsome trick with tung oil.... Thanks for watching
Hi tomislav, the inflection point is where the curvature changes. Great videos thank you!
Thank you for that, appriciate it☺️
I learned about how to make a better scraper burr and how to make a perfect ogee from one video. The finishing instructions were just bonus. 😊. Thank you.
@@DancingFox6 glad to hear that 🤗 thank you for watching
9@@tomislavtomasicwoodturning
Beautiful work with super finish! I love that you also put as much thought and care into the under side of the piece.
By the way this is the first time i have seen a video of yours so I'm now looking forward to your following videos.
Thank you.
Rob.
Thank you Rob
Отличная работа Томислав! Получилось хорошо и рисунок симметричный.
After watching both you and Richard use the overhand grip to deflect shavings, I gave it a try. It felt awkward at first, but I kept at it and now it feels quite comfortable. And it keeps me from using a death grip and getting tendonitis.
Awsome to hear that ☺️ thank you for watching and comment
You do beautiful work.
Thank you very much
Another very helpful video. I like the finish approach and am going to keep that in mind. I have some ash that I will be using for a piece in the near future and like the idea of a finish that doesn't yellow the wood. Thank-you for taking time to go through the details of laying out an ogee -- that process looks really straightforward and looks like it provides a great shape.
Indeed its really easy and simple and that is why I like it... Thank you Mark for watching
Beautiful platter, Tomislav. 😊😊
Thanks 😀
That was definitely a big ash blank!
Finally completed watching the whole video. I hope I didn't make unnecessary drama, earlier. I keep waiting for commenters like that to make a true contribution.
But, the platter is excellent in each aspect. Great form with that elegant ogee. I like the use of white in your finish. I used to colour my sanding sealer, but now apply dye independently so I can work it after it dries. My latest mix was to melt mica powder into a little bit of my beeswax and mineral oil finish. Gold adds a nice twinkle in oak and I made some with iridescent turquoise to use on a wenge keychain. It catches everyone's eyes around the table. Your white was probably more elegant and less tacky than my choices. 😅
No worries Jay, thank you as always for watching
thank you, great how to
Thank you for this video
Thank you very much for watching 😀
Nice work, learning a lot from you, cheers from Aussi , well taught!
Thanks, cheers mate
Beautiful work, I'm impressed with the results using ash. Now I want to copy your work!
Go for it 👍
Beautiful work Tomislav, love the design. You've given an idea for the design of a large (250mm) Communion Paten I've been asked to make for a Church I attended in Manchester when I was there.
Awsome to hear that, use what you can to inspire ☺️
Tomislav, first time watching your videos, great job, really enjoyed it so I decided to subscribe, glad I did. Can't wait for more. You're a real professional!
Thank you very much 😀
Привет, Томислав! Прекрасная работа! Идеальная форма! Работа зрелого Мастера! Спасибо. Для эксперимента с цветом можешь попробовать масло Osma Natural. Оно немного выбеливает материал. На тёмном материале, типа дуб, получается интересный результат.
Thanks for suggestion, I'll look up in to it😉
Thanks for watching
Buon giorno Tomislav un piattofatto veramente ad opera d'arte, sono rimasto sorpreso da come utilizzi le tue sgorbie. Complimenti un caro saluto, mi sono iscritto perché mi farà piacere vedere altri lavori e imparare qualcosa di più.
Thank you very much 👍
Nice.
Very nice Tomislav
Thank you
Perfect design for the wood, and the finish is splendid.
Thank you,glad you liked it
Thank you Tomislav, it came out very nice and well explained. Quick question, are these painting material are wood safe?
You probably ment food safe right?
Basicly any finish after few months is inert enough to not be an issue for use...but this is more serving platter so it won't be an issue although Odie's oil is food safe however on pigments you should ask Odie's.
Hope it helps but I only do stuff like this on serving or decorative pieces .
Hi, Tomislav.
Why you don't remove the bark by axe before you cutting the circle?
Splits of bark may hurt your fingers often at the left hand i've learned in my first lession woodturning.
Love greetings
No need as I did try to pull it off but it was solid on the wood,but I rarely get hit by bark ,if its loose then I remove it, but if its solid like this one then its faster to turn it away
I like the way ypu raised a burr on your scraper. Good deal! Nice looking piece too! Thank you for sharing.
Thanks for watching
Clewes calls it the inflection point, where the curve has to bend to the other side
Awsome, Thanks for that😉
You inspire me but when I look at my lathe I just think…. Nah.
I just can’t get it unfortunately 😔
Really nice. Have you ever just colored the rim and left the center just with wax? It might make a nice contrast as well.
No I haven't but its something to try out for sure☺️
Very nice work. The trick about the ogie was helpful. Would it be possible to put a link in a comment about where you got it or to learn about it more? I didn't quite get the reference from the video. For instance, what is the reason to go against the grain in the first step?
ua-cam.com/video/SNDxDHShOL8/v-deo.htmlsi=51AarLY-dpjfWnEI
This is Jimmy's video,has some other as well.... The reason to go against the grain is so you see a bit better the curve Your cutting,but be aware that last cut has to be with the grain
I know nothing about wood turning but I know maths. The point you mentioned is the inflection point. It's where the curvature of a graph changes sign.
Yes, I could not remember the name for that, thanks 😀
Your right that is a "big ass blank"....😂
😂😉
Love that piece! Great job as usual!
Thank you☺️
Wondering why so many pull cuts. Also use of cloth rag is potential for finger injury.
Everything is potencialy dangerous on the lathe, that is why I learn the trade for 3 years and carrie on from woodworking to woodturning, now I like using cloth, and I never wrap it around anything, especially fingers, if it cought then its just taken away from my hand , so never wrap anything around fingers... But there is nothing wrong using paper towels , we all use what we are comfortble with.
On the subject of many pull cuts, its accually not that many and I did enjoy turning this,so I didn't go fast or had to rush....
Everyone says to never use a spindle gouge on side grain, but then I see alot of people on youtube who are seasoned turners doing it (many of the same ones that say not to do it). Is it safe? Are the certain conditions it is safe and other conditions it is not?
It’s only deep-fluted spindle-roughing gouges that shouldn’t be used for bowls and other facework.
Deep-fluted spindle-roughing gouges were designed for roughing spindles. They used to be marketed simply as roughing gouges, so novice turners, not unreasonably, used them for roughing bowls and heavy catches often resulted in a broken gouge. That’s where this myth that no spindle gouges should be used for bowls comes from - people using the wrong tool for the job.
Thanks Richard for your input ☺️
Like Richard says ,most turners think about spindle roughing gouge when they say Not to be used on bowls.... Regular spindle gouge its fine, especially on outside where you don't have big overhang and stress over the tool rest. And also its cheaper then bowl gouge.
But like with anything,use tehnique and tool that Works best for you, just make sure you don't use spindle roughing gouge on cross grain work.
Hope it helps
@@RichardRaffanwoodturning Awesome information, Thanks!
Do you think the color will fade with time or completely with washing. Although as a display item it sure looks good.
Not sure to be honest, I'm curious as well ☺️
Absolutely gorgeous Tomislav, however I really doubt that you started turning it at 10,000 rpm. Maybe at 1000rpm but even that is quite fast for such a large blank.
You are right, its not 10000 rpm 😅 not sure how I miss that in edit...
It was 1050 and I do turn slighty on faster side of rpm but this blank was balanced lovely and dense all the way , again I always reccomend for someone who just started out to stay under 1000 rpm especially on big stuff....
Speed can be whole another video and what affect it and what is safe...
Maybe one day I'll do a video 😉
Thank you very much for watching
Was the scraper that you used on the face of the rim a negative rake scraper or a standard scraper?
I use 99% standard scrapers 🤗
Do you think it's worth it to raise the grain with water before final sanding and finishing with oil/wax? I was wondering if I should do that on bowls that'll get sold.
I do it a lot when I make utilitarian stuff for clients, on some woods like ash its not always nessesary but maple likes to raise a grain when its washed....but also consider that over time,with use and washing the raise grain will diseperde...and you will have nice and smooth surface
I know the oil you used is food safe but adding pigment to the oil still food safe? I’ve wanted to try some color to my work but have been afraid of paints and can’t find one that is food safe. Your work is always wonderful to watch. Your lessons are great to learn from.
Good question, I would say as its normal that after month or so every finish is inert so I think this is ok as well, now usually when I do a paint I use paint in outside, that way inside its still clean wood.
a term used in geometry where a curve changes direction (not a precise definition but adequate for this purpose) - inflection point.
Aaa yes, I knew it was something like that☺️😉
@@tomislavtomasicwoodturning you were really close considering you have probably only encountered the term once or twice. You do a great job with your videos. I am glad that I subscribed.
@@jeffreydickson8888 awsome and I really appriciate support 🤗
Is the delineation between the rim and the bowl functional or just to break up the curve line? If this is a functional platter, it doesn't seem necessary. I like Jimmy Clewes technique. It looks great on your platter.
Thank you, its both decoration and its always sort of nice when you have a border around as it looks more elegant.
Well atleast to me☺️
@@tomislavtomasicwoodturning When you turn large platters, do you prefer the mortise grip so you don't have to flip to finish the bottom? I thought you would use the rim groove for that.
At about 1:50 you said the spindle speed was 10, 050 RPM. Uh, I don't think so. I'm sure it was just a miss-speak because I love your work. You consistently inspire your membership to approach your level of excellence. Admittedly, it sits upon a very high plateau.
Wakodahatchee Chris
Hi Chris
Ups I miss spoke that for sure😅 it was 1050 rpm, thank you very much for watching and support what I do
You mentioned the ash was kiln dried, do you have a kiln? If so, I would love a video on your kiln and how you constructed it. Thank you so much for your wonderful videos!
I Usually use my wood that I have cut and air dryed but for slabs I go to hardwood dealer,they have it kiln dry.
If you have a burnishing tool that will work better.The burnishing tool should be harder metal than the scraper.
Yes in theory but when you don't have it this works like a charm.... 🤗
Nice finished product but he works a bit non safe
Was having the wood mounted the wrong way in the thumbnail a form of wood turners click bait joke ?
Probably😉 but its easier to get it in shot the way I wanna
naughty .. moving the tool rest while lathe is on ....for new turners "NEVER MOVE THE TOOL REST WHILE LATHE IS ON" thats strike two again moving the tool rest is "VERY" dangerous great video otherwise :)
Not sure if you are just kidding or being serious, dangerous is very heavy word.
Do you think that pro turner should do stuff different just beacuse of the new turners,just beacuse I'm showing how I do things doesn't mean you have to do it...
Its just common sense for many stuff and its like driving car, you see others drift a car but that doesn't mean I'll go on the road and drift car non-stop.
Thanks for watching and comment 👍
@tomislavtomasicwoodturning so your telling me that a new wood turner should already know these thing ! Ok then why are you doing these videos if you don't want anyone too learn from it
@@gregeastman6662 no, I'm telling that there is a lot of common sense in turning , my goal with videos isn't to argue so I have better things to do.
I'm glad If someone gets something out of my videos and If I help inspire....
@@tomislavtomasicwoodturning ok I help teach wood turning 101 an that's one thing tell "all" are students if there 16 or 61
Probably shouldn't move it but it gets to be really old turning it off and waiting. Sure it's safer but if you want safe don't work on wood spinning at 1200rpm
I gotta admit, I didn’t follow your ogee instruction. You lost me there.
I'll do dedicated video on this soon
❤👍
Why didn’t you use the tail stock. SAFETY FIRST
Tomislav uploaded this video 26 minutes ago. You commented about 10 minutes ago. You criticized him before you could watch the whole thing.
Get a purpose and touch some grass.
@@jayscott306 There was no toxicity in the OP comment, why the need for being nasty just to prove that you are 'a real fan'? It's true that using the tail stock would have been safer, especially at the beginning of the turning, and obviously you can see it after a few minutes of watching the video (once the wood is balanced you don't need the extra support anymore).
I would use it if I saw/hear/feel the need , blank was free of defects, and nicely balanced, but feel free to use it, I do stuff I'm comfortble, like you do as well on your end. Thanks for watching and comment
@@jayscott306 if you don’t understand the need for safety don’t subject your comments to those newer turners who need to know
No need to fight, we all turn with each comfort level, The blank was balanced,defect free and I know how it will behave....
People often think just beacuse tailstock is there that they are safe no matter what which is very missleading.... Its safer for sure but not bullet proof and with improper tool handling still someone can get injured ,even with tailstock in place....
Hopefully you got something else from my video instead of just safety notes as again I turn for a living and I do stuff I'm comfortble with.
Thank you very much for watching and comment
Warum so ein bescheuerte Title Foto?
To bring more comments like this, is that really one thing you get from my video?