Gotta try the wooly nylon. Also, loved the tip about how to turn corners to eliminate use of thread sealer. I've been looking for how to do that. Thanks!
@@stacyrobbins I tried turning corners using several pieces of scrap fabric. Unfortunately, I'm having a "repeatability" problem from one corner to the next. In order for the fabric to pivot when I reach a corner, I have to work the stitch loose from the fingers/pins that help form the stitch, which allows the threads to become loose just below the needle. Sometimes these loose threads will be captured when I resume stitching and they aren't seen in the final product. Sometimes, however, a loop or two of thread will escape capture and can be seen flagging out from the corner. I'm afraid to clip them off as that could lead to that corner unraveling at some point. It's a bit of a hit or miss about getting a clean corner each time. :-(
@@spat7378 Your description is so clear I can picture it! I am uncertain about the fix though. You may be able to sew to the edge of the fabric and then turn, pulling it back down. The edge will not be a true miter but the threads won't be cut or pulled leaving a smooth finish. If you find a solution (tension or thread change for instance) I am interested. I am also curious if it always works when sewing with a certain grainline. Like it turns better going from cross-grain to lenghtwise. Just thought.
@@stacyrobbins Thanks for the reply. I’ll keep playing with it to see if I can’t find a workable solution. I just need to figure out a way to consistently get a clean corner. I need to make a dozen napkins and placemats fairly soon as a housewarming gift. I’ll let you know how it goes. Take care!
This was a great GREAT video. Answered a lot of questions that I have about different threads and different fabrics. THANK YOU! But I’m just wondering why you demonstrated on an old Bernina serger when you had a new L460 in the picture!?
Hi! Been searching for such videos so sooo happy I found u! Question? Working with wooly nylon on my upper and lower… do I still have to go up in tension in my lower ? Also… if the upper is supposed to rolled to the back then the thread showing on top will by normal thread and not the wooly of the wooly need to shows in top and also in back? Thanks😊
Hello! You will need a low tension on the upper looper so the thread can wrap to the back. You will need a bit looser on the lower too because wooly is so stretchy. I always make a few samples. I will write my looper numbers on the sample when I get the right settings. I hope this helps.
@@stacyrobbins 😃 I just dont know what looks good 😂 - i saw your pictures on your samples but you are able to easily tell what looks good 😊. Any chance you have a video on how a bad hem looks like?
I want to make some napkins out of sort of upholstery material. Could be couch or pillow cases... Can i use this method for a thicker fabric? What changes would i need?
The thicker the fabric the less it will roll. You can do the same stich but may have to do a little adjusting of the tension to get the look. If the fabric is too heavy to roll, do a little wider stitch to make sure it covers and doesn't pull off the edge. You may want to use a wooly nylon or a fuzzier upper looper thread to get better coverage. Hope this helps!
The upper looper is the most prominent on both sides with the needle and lower looper as support. If using a decorative or wooly thread it should go in the upper looper for the greatest effect. I hope this helps! 🪡
Exactly what I was trying to figure out. Great instructional video! Thank you
I am so happy it was helpful!
Turning corners without leaving thread tails. Just what I've been looking for. Thank You!!!
Wonderful! Glad it helped!
Thank you so much! I’m about to start my first set of napkins and this advice on turning the corners is exactly what I needed. ❤️❤️
Hooray! I am glad it was helpful.
I love how you could explain the technical aspects of what the machine is actually doing. Very helpful!
I am so glad! I have learned that for some knowing how and why something works makes the process clearer. 🧵
Thank you so much. A newbie here 🙂
Welcome to the sewing circle! 🧵
Yes, it is everything I wanted to know about rolled hemming. I now know why I have never had success with woolly nylon!!!
🤯 I never knew that threading trick
Hooray! Maybe it will make your time at the overlock a little easier. 🧵
Really excellent video thanks for sharing!
Thank you!
Gotta try the wooly nylon. Also, loved the tip about how to turn corners to eliminate use of thread sealer. I've been looking for how to do that. Thanks!
Glad it was helpful!
@@stacyrobbins I tried turning corners using several pieces of scrap fabric. Unfortunately, I'm having a "repeatability" problem from one corner to the next. In order for the fabric to pivot when I reach a corner, I have to work the stitch loose from the fingers/pins that help form the stitch, which allows the threads to become loose just below the needle. Sometimes these loose threads will be captured when I resume stitching and they aren't seen in the final product. Sometimes, however, a loop or two of thread will escape capture and can be seen flagging out from the corner. I'm afraid to clip them off as that could lead to that corner unraveling at some point. It's a bit of a hit or miss about getting a clean corner each time. :-(
@@spat7378 Your description is so clear I can picture it! I am uncertain about the fix though. You may be able to sew to the edge of the fabric and then turn, pulling it back down. The edge will not be a true miter but the threads won't be cut or pulled leaving a smooth finish. If you find a solution (tension or thread change for instance) I am interested. I am also curious if it always works when sewing with a certain grainline. Like it turns better going from cross-grain to lenghtwise. Just thought.
@@stacyrobbins Thanks for the reply. I’ll keep playing with it to see if I can’t find a workable solution. I just need to figure out a way to consistently get a clean corner. I need to make a dozen napkins and placemats fairly soon as a housewarming gift. I’ll let you know how it goes. Take care!
This was a great GREAT video. Answered a lot of questions that I have about different threads and different fabrics. THANK YOU! But I’m just wondering why you demonstrated on an old Bernina serger when you had a new L460 in the picture!?
Hi! Been searching for such videos so sooo happy I found u! Question? Working with wooly nylon on my upper and lower… do I still have to go up in tension in my lower ? Also… if the upper is supposed to rolled to the back then the thread showing on top will by normal thread and not the wooly of the wooly need to shows in top and also in back? Thanks😊
Hello! You will need a low tension on the upper looper so the thread can wrap to the back. You will need a bit looser on the lower too because wooly is so stretchy. I always make a few samples. I will write my looper numbers on the sample when I get the right settings. I hope this helps.
@@stacyrobbins 😃 I just dont know what looks good 😂 - i saw your pictures on your samples but you are able to easily tell what looks good 😊. Any chance you have a video on how a bad hem looks like?
I want to make some napkins out of sort of upholstery material. Could be couch or pillow cases... Can i use this method for a thicker fabric? What changes would i need?
The thicker the fabric the less it will roll. You can do the same stich but may have to do a little adjusting of the tension to get the look. If the fabric is too heavy to roll, do a little wider stitch to make sure it covers and doesn't pull off the edge. You may want to use a wooly nylon or a fuzzier upper looper thread to get better coverage. Hope this helps!
I’m just trying to find out which thread colors show most on rolled hem.
The upper looper is the most prominent on both sides with the needle and lower looper as support. If using a decorative or wooly thread it should go in the upper looper for the greatest effect. I hope this helps! 🪡
your photo doesn't show which thread goes where on your machine.
True. I just named the what looper or needle. (ie: wooly nylon in the upper looper.) I will have to revisit the overlock and threading.