Besides car audio I also do custom paint and refinishing on vehicles and motorcycles. I’m a musician too. But my latest and greatest hobby is spoiling my grandson. 😊
My hobby turned into my business. Even as a teen, I loved car detailing and paint correction. I bagged a lot of groceries and stocked a lot of shelves at my local Piggly Wiggly to put myself through auto body school . To this day, I love to take a customers not so pristine vehicle and have it leave my shop looking showroom fresh again . Btw, pitty on the Lanzar being damaged, but great that the seller was so fast to make it right. I've had less than decent experiences with a lot of ebay sellers. I've noticed that sellers are quicker to dump some garbage on customers from ebay as opposed to Amazon pre-owned or open box. Peeps, just be careful when you order something, some of these sellers aren't as good as the one MoJo dealt with. 😉
Off topic - one way I try to help channels I really, really enjoy is.....if I don't have time to watch it completely. I will hit play and just sit the tablet down and go about what I'm doing (especially, when it's a channel continuing to grow). Because it helps a lot when their videos are watched until the end... Another great upload!! I was curious about the Victor amp. (And I did find a local sound shop close by me! I went and priced a single ported 15" enclosure (40 hertz) for $125.⁰⁰.)
Thanks for trying man. I was hoping to see results but I guess we'll never know. Sorry my suggestion caused so much aggravation. Thanks for the video!!!
I got the four channel version of this amp. Mine came with regular fuses. I know mine was not used it had no fingerprints on the chrome or lint. and the plastic caps on the rca's were bit stuck to the metal as if they had been dipped. I tested it with a 800w 60a 12v power supply at 12.7 and it played well on 2ohm, 4 ohm stereo. However since its a A and B class when I wire a 4 ohm and a 8 ohm speaker mixed on the A or B terminals it does the same thing where it goes green then orange then red. I thought it was faulty or had issues. Once I wired an even load through out it works fine. Also if by any chance any of the voltage going trough the rca's inputs or output drops or is not even, it will go into protect. Example hooked up the rcas to give left chanel only on A rca's and right on B rca's to make it stereo then patched from the output to a mono block D amp to drive the subwoofer and it works. However if I use A as stereo then B as stereo and the output to mono it will go into protect. if I use a stereo amp on the output rca's it works fine. It sounds really nice but it defenitely does not like uneven loads on speakers and the rca's and its quick to go into protect mode.
Besides car audio I also do custom paint and refinishing on vehicles and motorcycles. I’m a musician too. But my latest and greatest hobby is spoiling my grandson. 😊
Aw man, that’s some good stuff right there! Thanks for sharing! Enjoy!
Still a shame how far Lanzar has fallen from the old school days.
Yes, for sure!
My hobby turned into my business. Even as a teen, I loved car detailing and paint correction. I bagged a lot of groceries and stocked a lot of shelves at my local Piggly Wiggly to put myself through auto body school . To this day, I love to take a customers not so pristine vehicle and have it leave my shop looking showroom fresh again . Btw, pitty on the Lanzar being damaged, but great that the seller was so fast to make it right. I've had less than decent experiences with a lot of ebay sellers. I've noticed that sellers are quicker to dump some garbage on customers from ebay as opposed to Amazon pre-owned or open box. Peeps, just be careful when you order something, some of these sellers aren't as good as the one MoJo dealt with. 😉
👍🏻
Thanks DR! It takes some talent and patience to be a good paint and body guy. lol! Thanks for sharing!
Off topic - one way I try to help channels I really, really enjoy is.....if I don't have time to watch it completely. I will hit play and just sit the tablet down and go about what I'm doing (especially, when it's a channel continuing to grow). Because it helps a lot when their videos are watched until the end...
Another great upload!! I was curious about the Victor amp.
(And I did find a local sound shop close by me! I went and priced a single ported 15" enclosure (40 hertz) for $125.⁰⁰.)
@@barnes29510 cool, thanks! That’s not too bad, especially if it’s a nice box.
My 4.25 ft/3 single 15" box tuned at 29hz cost more than $125 just for the wood, jeez😢
Definitely was used and returned 😅. Great video
@@marcovaldovinos5009 yep, thanks Marco!
Video pause - mann..... You had me double check what day it was! 😂
@@barnes29510 lol, that’s funny!
Thanks for trying man. I was hoping to see results but I guess we'll never know. Sorry my suggestion caused so much aggravation. Thanks for the video!!!
Man, it was my fault for trying to keep from buying that brand new one for $150+. How much did you pay for yours?
@@stereomojo It was a couple years ago now but I think it was $75
@@crazyhorseracing6130 ok, that’s pretty good. Is it still going strong?
@@stereomojo Yep so far. Pushes my 2 MTX 12"s pretty good but I know it's nowhere near the box ratings. I'm figuring 250 max
@@crazyhorseracing6130 that’s good. Let me know if you get to where you’re interested in sending me yours
LS fest sounds fun
@@joe112000 it’s a blast!
Whoa, you're local to me sounds like, I'm in North 'bama too. Other hobbies are wood working and turning, and hobby farm.
@@Grimster72 that’s awesome! What part of north AL?
@@stereomojo Ardmore - Huntsville
@@Grimster72 awesome! I live in Cullman County, but I work in Madison/Huntsville.
@@stereomojo Yeah same here, work there, live "not there" hehe.
Finally a dyno of the lanzar vector. Can you dyno the lanzar vector 4110 2000 watt 4 channel
I got the four channel version of this amp. Mine came with regular fuses. I know mine was not used it had no fingerprints on the chrome or lint. and the plastic caps on the rca's were bit stuck to the metal as if they had been dipped. I tested it with a 800w 60a 12v power supply at 12.7 and it played well on 2ohm, 4 ohm stereo. However since its a A and B class when I wire a 4 ohm and a 8 ohm speaker mixed on the A or B terminals it does the same thing where it goes green then orange then red. I thought it was faulty or had issues. Once I wired an even load through out it works fine. Also if by any chance any of the voltage going trough the rca's inputs or output drops or is not even, it will go into protect. Example hooked up the rcas to give left chanel only on A rca's and right on B rca's to make it stereo then patched from the output to a mono block D amp to drive the subwoofer and it works. However if I use A as stereo then B as stereo and the output to mono it will go into protect. if I use a stereo amp on the output rca's it works fine. It sounds really nice but it defenitely does not like uneven loads on speakers and the rca's and its quick to go into protect mode.
Algorithm comment 👍
@@Stoneman1971 thanks Allen!
Wouldn't be surprised if one of the fuses wasn't even wired to anything. I have seen Lanzar do that before. Not sure what model or line.
@@kevszman yes, I bet so too
Over 20yrs ago i had a lanzar vibe amp. it pounded 2 600watt american bass map series 12"s. The new stuff is all junk!
About the same here... 25+ years ago I traded a running Lowrider (with switches) for an 6k Lanzar amp (.5 ohm).... They WERE nice
I never had one, but I remember seeing them when they were good amps.
There is a chance that only one of those fuses are connected to the board
@@travishoel3755 that’s probably right
Anyone remember the first LANZAR logo? (before the cursive script) all capital letters with woofer underneath
Hmmm, I’m trying to think…I might have to look it up
Oh no not another crappy lanzar amp
Specs say 90watts x 2 so it’s a 2k for sure!#😂Lol
@@bondalero0074 I know, that’s weird right??
I bet only one fuse connect to the board
@@Thumper68 you’re probably right about that. I didn’t open it up to check
🙃 open box 😩
I know, right?? Geez
YOU DO TO MUCH BULL S. TAKLING NOW. 15 MINS OF TALK FOR NOTHING
@@johnjohnson7128 you do too much BS typing
@@stereomojo he douches way too much too
Roasted, lol😂
@@johnjohnson7128 BOOM 💥 talk shit get bit
🤣🤣🤣 @@stereomojo 🤣🤣🤣
GOT EM