Відео

Have u test belva-bxd3k-3000w

Yep...Hard to go wrong with quality plywood. I used mdf for years and 100% wore out a couple of vehicles' suspensions prematurely from the combined weight of it all with the enclosures, equipment weight, to the amp rack/plate/ trim panels etc. Switched to 0.5 and 3/4 plywood about ten years ago and haven't looked back. Yeah it's more expensive, but it's lighter, stronger, and is just better suited to the auto environment in some areas of the country with drastic changing temperatures and humidty levels. Another plus is the saw dust from cutting plywood isnt near as harmful as what mdf generates.

Great video and Happy birthday and happy new year too. Microphone sounds great too with good depth in your voice. Gluing panels together for double wall strength and sonic stability is good; but it will be a heavy box by the time it gets fully assembled with the hardware and subs installed. Of course a good and light weight don't work together. Last good enclosure box I built was installed in a Chevy extended cab pickup with the rear fold down seat removed. I did the double wall construction like your doing as this box was for 2 15" sealed small box enclosure design. I designed the box with 2 2x6 #1 grade lumber inside the box so as to make it as safe as possible to not move in the event of a high speed wreck. I through bolted through the floor and added a cross member bolted to the frame and bolted the box with the floor of the cab with spacers into the crossmember. Sure enough , as the guy had a bad habit of drinking and driving; he wrecked and totaled the pickup. The bed torn off the truck in the accident and he wasn't wearing a seat belt and was thrown out, but his girl friend did wear her seat belt, so she wasn't thrown out. That truck hit big pine trees 18 feet high in the air sideways and the cab was twisted and partially collapsed, but the subwoofer box held in place and may have stopped further collapse of the cab onto the passenger. The driver now uses a wheel chair to get around, and his girl friend wasn't injured too badly and recovered. The cab collapsed to the box and stopped. The frame was twisted as well. I don't know exactly if the speaker box saved anyone, but had if not been secured that now woman may have not survived the accident. That guy was an accident waiting to happen by the way he drove and lived. Im glad I built that box, because someone else wouldn't have secured it as I did. In wrecks all contents in an automobile become projectiles unless they are firmly secured. Maybe you or someone could do a small segment on this subject. I figure you have been into the car audio hobby long enough to hear of speaker box injury in car accidents. Its great you and your family are into the hobby, and that's a good thing. Happy birthday and Happy New Year and GOD bless Earnest K5EWM 👍.

I really appreciate your efforts! Just a quick off-topic question: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?

Sheeeeeesh to be honest I have 2 ix 12 but I can’t seem to hit low or high 20’s , do you think it could be the amp ?

Happy birthday brother! Sure wish any of my children shared my same passion for car audio. They only see the amount of time and effort I've put into my own builds, then shake their heads when given a demo, lol. Those 4 subs are bound to turn some heads, just one 15 does some damage, 4 should be perfect 😂. Keep the amazing content going 🦾

I'm in Tuscaloosa

What part of Alabama u from

Received mine from WOOT!, an Amazon company and have it powered with 4gauge amp kit on a Audio Legion 12" in ported box. I would say I'm using around 450-500wmrs the way the settings are. Completely shakes and rattles the Pontiac Vibe it's in. The bass is solid and deep, thunderous and clean. Thinking paid $62.** For it, it's definitely a budget king for the daily. Great video keep them posting

War damn eagle! My brother and i went to school with Hugh Freeze. My brother was Hugh's center in football. Y'all gonna be really good next year. Hotty toddy! 😅

Mic is great. I notice on the second panel the top piece is a little bowed. For this reason I myself will place two 40 lb dumbbells and then screw or nail for the bow out to each end. I tried this with out the weight before and the screws didn't full straighten out the bow. Don't ever want that bow to come lose and slap. May be hard to locate after don. Be I think you have done a fine job I just wanted to add that.

I don't use quite as much glue 😅 have been wanting to get a brad gun for just this purpose. I use a few screws after I glue and weight. Good looking wood. Happy Birthday and happy holidays once again. Looking good.

Happy Birthday and Happy New Year to all everybody. I do enjoy watching box building vids, something to learn from everybody. Also, I am looking for an 8K 1 ohm to replace my Taramps MD 8k 2 ohm version. I have been running my setup at 4 ohms (my sub is a dual 2 ohm) since my amp is rated at 2 ohms and I do not want to run it at 1 ohm. What are you going to be pricing your 8K at? Ok, keep up the good work.

@StereoMoJo- Happy Birthday🎂. Great "Bonding" session, pun intended😁😂. Great video, & Happy New Year to you & your Family❤️

Do brad nails actually pull the panels together or does it just hold them together with whatever gap already exists? I've always used screws, but I'm thinking of trying brad nails. I may also try a Kreg jig to use screws internally so you don't see them. My main issue with screws is that they look ugly. I like their function, though. No clamps needed.

This is awesome. I wish my boys were interested in this stuff along with me like this. And HAPPY BIRTHDAY!! 💯🎆

Happy Birthday!! 🎉Hope it was a 🔊LOUD🔊one!!

Happy Birthday, Happy New Year my friend!!

This is beautiful

Happy birthday bro!!!

Happy birthday

Happy birthday

Happy belated Birthday and Happy New Year !!!

Happy New Year. Enjoy your time with your boys! Happy Birthday buddy!!

Happy birthday and Happy New Year Stereo Mojo👍

Great Father and Son team

Happy Birthday Pops! Happy New to you all!

Happy Birthday Happy New Year

Can you try out the Pyle Invincible Series class D 1000w mono block? I keep seeing of being promoted when i was looking for amps. It claims fairly reasonable watts and is only $50 on Amazon. Besides that, i haven't seen a modern pyle on a dyno. Btw the amp in this video is still $86, seems like a good bang:buck still

Happy new year 2025.God bless you.....Question if you had to choose between the older version fosgate R11200 or the kicker cxa 1200.1 what would it be?

I am looking for an 8K 1 ohm to replace my Taramps MD 8k 2 ohm version. I have been running my setup at 4 ohms (my sub is a dual 2 ohm) since my amp is rated at 2 ohms and I do not want to run it at 1 ohm. What are you going to be pricing your 8K at? Happy New Year

Damn I just bought this. I thought it would be good for 1 12”. I am sure it will be fine but thought it was going to be a lot more powerful

Hey if it recommends a 200 amp fuse but pulls more on the certified test should i run the 200 amps of fusing or more. Im kinda confused about it

Glad you cover these brands that claim to have good power yet ... Also glad you have a line of amps yourself that actually do over what they are rated 🎉 .. lawd some of these companies smh 😳💩

Didn't know audiopipe was still doing anything. I had an audiopipe 4ch mini amp probably about 11 years ago now. It was garbage if I'm being honest.

That would be a great amp for a front stage on a lot of systems in fact signal of noise ratio over 100db is fantastic

There is a huge difference There is a huge difference between a PAC and a basin of, APAC controls to gain, a telephone or a stereo jag remote knob style is bass boost

Gotem 😂

Can you test Taramps ts800x4

Definitely not gonna blow them subs lol😅

The top of the line was the Zed Audio designed USA made HC and CR series, I have one (Crunch 250HC) that was abused for 15+ years and still works fine

Mine came with two 25 amp fuse, can I change them to 50amp like yours?

Nice unboxing enjoying your content

Im new to all this audio stuff i got this amp and im using it to run a 10” kicker comp s thats rated at 300 watt rms at 4ohms, should i get a lower ohm sub or just stick with the single 10”? If you recommend an upgrade what would be a good budget sub?

Great honest video as always. That is a very low end quality amplifier. If you attempted to run as highs (door speakers or 6x9 speakers) you would likely have ground loop issues with noise. Then have to add a filter to quiet the noise down. Crunch is low quality stuff like Boss and Pyramid. I don't know price for an amp like that but my Ocean audio 4 channel is powering both 6x9 and 6.5 door speakers and does a respectable job in doing so and that was an low dollar amplifier. $65 bucks best I remember. Other companies like Ocean audio and Audiozerone are putting out affordable equipment that performs well. If Crunch and Boss don't get their act together, they will loose out on sales volume due to junky quality and the BS wattage ratings. Your absolutely right about 4 guage being ridiculous to connect that amp. Awg 8 would be sufficient all day long from the battery to the amp (length of vehicle). I think a 30 amp fuse would be more appropriate than a 40 amp fuse. Oh well I guess there is a market for that stuff. I know its not me. Lol. Great video as always and completely honest. 73 GOD bless and Happy New Year. Earnest K5EWM 👍.

Nice

I think most JL amps call for 3.5volts to remote turn on the amp. Will the 12v damage amps?

Put that on some tweeters

I have this same amp but I’m having issues with it sending power to the speakers I have tested the speakers as well as the RCA cables and neither have issues amp is turning and powering up but not sending power to the speaker wires at all

Algorithm comment 👍