HOW TO CHANGE THE WATER PUMP (Impeller) on a YAMAHA 150 OUTBOARD
Вставка
- Опубліковано 25 чер 2021
- In this video I will be showing you a step by step way to change the impeller in your Yamaha 150 outboard. Im not a professional outboard mechanic but just a guy who likes to do all he can to save some money and perform regular maintenance on his boat. hope this help. please let me know if it does.
- Спорт
![Lp. Последняя Реальность #97 ЧЁРНАЯ МАТЕРИЯ [Анти Скинт] • Майнкрафт](http://i.ytimg.com/vi/k4MjXCzKsYw/mqdefault.jpg)
Always lube the drive shaft with Yamaha grease to help prevent the bushing squeal on deceleration
My single Yamaha 150 on my Sea Hunt Triton and I appreciate you taking the time to do this. I'll be doing it soon. Thank you
Great Video. Love the low key and smooth approach.
So far best video I've found for newbies attempting to do this and save some money. Thank you sir
Outstanding video, you did a great job explaining each step and what need to be done and what to look out for, I feel I could do this new time on my Worldcat GB ed.
Thanks
Great video thanks for sharing. Changed the impeller on my F150 for the first time with confidence.
Man you have been a tremendous help. Very informative on each step.
Thanks for a great video, which gave me the confidence to change my water pump out on my 2012 yamaha f-150!
great video, thanks. This video gave me confidence to work on my own Yamaha 150 4 stroke I really appreciate the time you took to make this video..
Glad it helped!!
Great video, very useful and I appreciate the very understandable instructions.
Great job with explaining stuff. Also editor did a great job too ! Thank you 🙏. Ya did good
Thanks for doing such a clear video. Doing this on mine tomorrow.
Good video . If the metal ring wont budge it is easily defeated by gently heating the cap and softening the plastic ring . Of course the metal and plastic rings will have to be replaced . I like to grease the impeller and housing before reinstallation . Be careful when reassembling the pump housing the wavy washer goes in the middle .
Best video on the net for this job! Thank you friend!
Glad it helped you!!
I retired Friday, family is coming up to spend some time on the water and a cabin on the lake retreat next week. I put the boat in the water this morning and "impeller problem," no water discharge. I watched your video, it was/is EXCELLENT. I believe I will make this change myself. Thank you for a great job!!
Thanks man!! Good luck!
Great video. In a pickle and not sure if I can get dealer to put impellers in for me in very short notice. This video was great and gives me confidence to try. Well done! Thanks!
Excellent Instruction thanks Darryl from Australia cheers.
Awesome man!!
Thank you for this video! Helped me on my first replacement!
Was a really helpful video ! Thank you
Very nice presentation and helpful !
I thank you so much for the amazing video!!! It saved me so much time and money. You should do videos for a living:)
Well done you made it look easy Thank you very good video
Excellent video! Very informational.
Awesome video brother. Watched it a couple of times in preparation of changing one out on my boat for the first time. I really appreciate you taking the time to demonstrate it so well.
Glad it helped you!
Totally appreciate your video! Awesome!
Great video. Thanks!
👍👍👍 Good job man... Greeting's from Greece...
that's Awesome
Thank you, I did mine this morning, all good! You are a big help.
great video, awesome job, off to the shop for parts, thank you
Glad it helped
Very good instructions!
Excellent video boys, thanks
Gracias for the refresher brother 🫡
Great Job!
Excellent video!
Nice job my man!
Great video thank you
Thanx that was good I just bought a boat with a 150 Yamaha 2 stroke a 2011 it looks very similar The last person who did it put the three washers ect on top of the plastic housing
It’s the little things…
Thanks for the video, any suggestions on what I should do if the anode bolt doesn’t want to come off and the top just keeps spinning? The anode is loose but doesn’t come off while the top bolt just keeps spinning and doesn’t tighten back up either
great vid! you earned my sub!
Great video. Thanks
Hey I really appreciate your video! So easy to understand and well explained.. Quick question for this video. What year was this 150? And was it a F150XB. (Sorry I might have missed it!) Thanks again!
Thanks great learning tool
Thanks! Question, I have a 2010 F150 that gets overheat alarm only at idle speed after about 5 mins of idle. Pee stream is going OK, but maybe takes longer to get started. My boat is used in fresh water, clean lake, water is on "hard" side (some lime). So this looks like bigger job than changing the PRV (Poppet) valve and also the thermostat. What order would you (or readers) start changing these parts? I'd like to start with the most likely culprit, obviously.
Hey Dave, tbh with you I would prob just go ahead and change all 3. That way you essentially eliminate the problem and with it being at 2010 it wouldn’t hurt. Good luck man!!
Do you not grease the drive shaft splines? Great video.
Nice video. I'd also grease up the top splines on the prop shaft.
What size props are you using
Is there anyway to test the new impeller you just put on to make sure it’s working before you make a long drive to the water? I bought some muffs but they don’t seem to work, I also put the bottom part of the motor into a storage container and filled it with water it barely covers the black screens on the bottom of the motor but no water is coming out not sure if the water should be any higher or if I didn’t do a great job on my impeller install?
Yes there is a way to test it but you will need a container that will totally submerge the lower unit for it to pick up water like it’s supposed to. I have a plastic barrel that I can use for mine like that and they also make a heavy duty rubber bag that you can fill up and flush them. The black screens on the lower units are just for water pickup once you are up to speed. Good luck
Awesome video sir. Any ideas on how to finagle the shaft into place along with the shifter? I am having the most difficult time possible. I’ve got a 2015 150hp as well
Hey Choco, a good pair of long needle nose pliers can do the trick
This is a great video, thank you for this!Quick question.. I was under the impression that you had to drain the lower unit oil but I guess not?
No you don’t, the lower unit is sealed so water doesn’t penetrate
What is the torque on the bolts and how many hours on that impeller
I’m looking at this because my shifter control is stuck in neutral and won’t turn to engage forward or reverse; so I was looking to see if we can get to it through the lower unit
Is all that corrosion on the drive shaft normal? Mine looked similar and mechanic said it shouldn't be that corroded...
Good video 😀
FINALLY YOU ARE BACK!!!
yeahhhhhhhh bbbaabbbyyyy!!
If you do this yourself does that void your warranty?
I have a f150 left handed , should I spin drive shaft counter clockwise as I slide plasic cover over new impeller? thanks great vid.
no the motor spins clockwise the difference is in the lower unit
Great video , where did you get those needle nose pliers from ?
Agri supply,
Great video
Can you tell me what size of propellers you run
I run 13 3/4 x 21 and feels like is over propped
Thanks
Depends on the weight of your boat. I have a 23p on my ranger fish and ski. 21p might be better. Maybe in your case a 19p would do if it's a heavy boat or a different prop altogether. It's it's a 4blade, try a 3. Hope this helps.
good video ty
Great video however I would suggest putting some grease on top of the shaft. Just regular marine grease will do.
Where do these 150s take in the water the lower of the two on the Shaft.
yes great job explaining everything thank you
Yes they pick up thru the black pickup grates and there is hold at the top of the lower unit that will pick up some water
Good stuff man. Like the little Pro Tips you give. Do you know if doing this will it void the warranty ?
Thanks man.
Shouldnt void warranty but I would use Yamaha oil, filters and keep receipts if your worried about it
@@THEBIGA2300 I always do. Thanks again
Great job on the video. Can you tell me what kind of transducer you have? Maybe share a picture. Never seen a mount like that
I have the lowrance/simrad 3 in 1 transducer with side scan. I was having a problem with losing bottom at higher speeds and lowrance makes a mount that enables you to mount to the bottom of the hull which gives it good undisturbed water all the time.
I have a 2015 Sea Hunt 25 GF as well. I have the Raymarine Axiom 12s with RV-100 3-1 transducer. I have the same issue. Real common without thruhul from what I understand.
I have a G rated Facebook site as well. Saltwater Fishing Gulfcoast if interested. Again nice job on the video
@@MrCampbjam thanks man I’ll check the FB page out.
Here is a link to the bracket for the transducer www.westmarine.com/buy/lowrance--flat-mount-bracket-for-structurescan-3d-skimmer-transducer--17361080
That’s amazing. Wish it would work for mine
Is "never sieze" the actual name of the product you use? Is it a marine grade lubricant? Or does that matter? Great video. I just don't want to use something inappropriate when I do mine.
I think it’s actually called “anti-seize” you can find it at any auto part store
What work bench is that you used to hold lower unit?
It’s a black and decker workmate I think is the name
Is there a special formula of Never Seize you use? I see there a few different kinds. Thanks.
I just use the gray one, anti seize.
@@THEBIGA2300 thanks!
You did not crease the main axle when assembled it back? Should it?
I normally do put some on there, must not have made it in the video
great video thank you, i need some help, my port 150 shift shaft mustve of mis aligned and would not slide in so we moved to neutral more and will only stay in forward now, do you have any videos or some tips to get aligned correctly? thanks
I don’t have any videos on it but you would need to turn the shift shaft to the middle position on the lower unit and realign and install
@@THEBIGA2300 OK thank you very much
Did you have shifter in forward or neutral position?
Neutral
I’ve got the lower unit 1 inch From going back all the way in it seems to be hanging up on something but I can’t figure out what?
Found another video, it showed if you put the boat in gear and just put the prop on enough to jiggle it a little left and right as you’re pushing it up, it allowed it to slip right into place.
So was the motor in gear or in neutral when you started?
Always neutral
Will a bad impeller cause low oil pressure warning to go off?
Shouldnt, it could make the overheat alarm come on but that would be it
What's the bolt part number if they become damaged for the outer bolts?
I’m not sure on that one
Gamefish gang gang!!! Did a 125ish mile round trip Saturday, noticed my starboard had a weak pee. I would say about 30sh percent less than the port throughout the entire rev range. It did get a little worse by the time i got home, never got warning lights though. Will be tackling the impeller wondering if it's deteriorating
Gang Gang baby!! Yea I would def swap it out! You dont want to get halfway out there and the alarm go off!
@@THEBIGA2300 there was a trick i learned havent tried but someone said if your impeller fails hook your flush port to the raw water b and run it, not sure if that's a good piece of advice, whats your thoughts? My gamefish 27 won't plane on a single 150 so if i could keep both up in pinch than let it rip 🤣
@@htownsfinest87 I’ve been told the the flush port does not put any water to the impeller. This is why you are never supposed to start your motor when hooked up to your flush port or you can burn up your impeller. Now if you’re out far and your water pump fails, I guess you are going to be replacing your impeller anyway so maybe you’ll be fine to get you back.
How many hours are on the boat when you did this ?
I think it was around 300
What year is the motor? Thank you.
2014
@@THEBIGA2300Do you know if anything has changed for my 2022 model?
For some of you guys that have already done this. How long did it take?
Is this a 2 or, I suspect, 4 stroke? Same process?
It’s a 4 stroke, same general process on 2 stroke
You do not put anti seize on the spline
I am curious why you don’t; I am about to change my impeller on my VMAX 150 here soon.
@@jasonbaldridge4281 Anytime you use anti seize you're not getting a true torque speck ,
Sir are you conducting online course..?
No sir, I’m not a professional just a guy trying to save time and money
Grease the spline where the drive shaft goes into the engine. Makes next time easier.
WHAT YEAR YAMAHA ENGINE IS THIS?
2013
DO U LEAVE IT IN NUTRAL?
How often should u change?
every 3 to4 years
Need to make sure you pull that shaft up hard while reinstalling the ring look this up
No torque specs?
Where can I get that table
Go to Amazon and search for black and decker workmate!
So u didn’t put a new collar on the shaft
No
Thanks very straight forward. I now have the confidence to do it myself. You saved me about 500$in labor at the dealership!!! I knew I was getting raped lol!!
You did not grease the splines on the drive shaft
I may not have showed it but alway put lubricant on the splines before sliding it back in
Next time please use marine grease never seize is only supposed to be used on plugs
Latex gloves 🧤 GLOVES?! Brother
You’re cotter pin is going to come off and you’re going to lose a prop.
Your introduction is tooooo long
Old impeller has a metal sleeve. The new impeller is just rubber. Do I have the correct impeller? New impeller 6E5-44352-01