Water Pump Removal Replacement Marine Outboard Yamaha 115~ Winterize
Вставка
- Опубліковано 26 тра 2021
- Water Pump Removal Replacement Marine Outboard Yamaha 115. Time to Winterize
Pump repai kit that was used in this video: 68V-W0078-00-00 68VW00780000
Exoman shows in detail how to replace a water pump on a Yamaha outdoor motor. His OEM kit included impeller cup water pump housing gasket and water plate
Subscribe to Exoman:
ua-cam.com/users/exoman?sub_c...
Support this channel:
/ exoman
Nice vid- things to add, everything on a Yamaha is metric. I wouldn’t use grease inside your cooling system. For the -o-rings it’s ok but for the impeller no. Instead just use a little soap. That way you don’t get any grease build up in your cooling system inside the motor.
What a crappy design by Yamaha. That metal collar won't come off the plastic for me. That part should have come in the kit because it probably seizes a lot. Thanks Yamaha for such a dumb design.
Old news now, but my 115 (SHO) takes a solid 30-60 seconds to start peeing too. Had me freaked out for awhile when trying to test it, starts much quicker on the water though. Apparently this is not abnormal according to googling. :)
One very important thing you failed to mention and do was lifting up on the shaft when you were seating the collar metal cup with your invention. 😮 there is a little play in the up and down of the shaft, to be correctly positioned and seated
If you were cheep. You only replace the impeller.
Also a 7/8 wrench works too for lightly tapping the metal cup in place , in case your old impeller isn’t usable 😊
I had to do every step 3 times to get it right,o rings popped out,couldn't get impeller into cup,couldn't get the spacer ring to come off the plastic spacer probably pay for it next time lol
More of the cute girl please
Just replaced the water pump on this same engine. So helpful! Thanks.
great good i have done them on mercs, now i have 2023 yamaha and they do not want water muffs on their outboards so dock side or over size water can , i use the huge trash can on wheels and install a drain valve at the bottom of the trash can to drain water when done testing
Probably the best video I’ve seen for repair! You have a gift to teach and your delivery is entertaining. The add-ins from your daughter and wife made my wife and I laugh! Thanks again!
Thank you Exoman for the great tips! Greasing the splines, the cup, the impeller, the bolts,O-rings, and especially the woodruff key! Mine was fully corroded and I had to drill 4 holes in it and heat up the shaft to get it off! So guys, make sure you grease things up it up!
That trick with the old impeller was great! Thanks you walked me thru this exactly on my 13 115!
That was such a big help. I took it to the boat shop, to get the pump. Well they helped take it apart. But we couldn't remember how to put it back together. Your video was such a big help. It was like you was there with me telling me step by step. Thanks!
I just bought a used pontoon boat with an identical Yamaha 115. This was a very informative video.
The big old style aluminum trash cans work great for holding the lower unit while you work on it.
Great how to video, plus the bonus cameos of the always beautiful Jenn, and the equally beautiful Destyn
Thank You!! This was one of the best videos on how to replace the pump.
Thanks Exoman for you help on overhauling Yamaha water pump. Video was very professional and well put together without the BS other guys do. Appreciated the humor and "photo bombing" too 😁
The Thermostat is easy to change, it will corrode and stick. There are anodes in the engine block that corrode also. Thanks for the good video, I'll be doing mine this week. chuck