@@_BL4CKB1RD_ 🔴 What Is Islam? 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him. More ....
Excellent design guys! You could have gone even a tiny bit more forward with your CG on the 40% model. That was an impressive glide. Thank you for advancing flight!
It was great seeing you guys at Oshkosh AirVenture this year and getting the signatures of everyone at the Flite Test Booth. Looking forward to assembling the Sea Duck when I next get Home. Also, Thanks for the tips on dropping water balloons on my unsuspecting Neighbor (Countryside).
@@jn-ny8bh i only discovered that they had a booth due to Josh being at the RC flight on one of the evenings. Sea Duck someone else had was doing tricks suck as a flat spin and just going YEET right after take off
Has a lot of Promis for sure, however, I think you guys were in ground effect the entire time, You might wanna test it going off something with a much steeper decline to get out of that ground effect, if it glides nicely then, you 100% have a winner.
Awesome! I was watching "the best of Flugtag" and one plane was mounted on a "catapult" trolley that went twice as fast as the pushers walking speed. About 2/3 the way through, they pulled a handle and the plane shot off a rail on the trolley. Good luck!
Sadly all forms of mechanical or kinetic lunch, have been written out in the rulebook. It’s much more limiting then previous events. Lower dock in smaller wingspan. But will do our best to get as much speed as possible. :-)
@@FliteTestthis reminds me of ski jump events where they shorten the downhill length to keep the landings in a safe zone. Maybe the reason is similar. They have a limited space for the landing zone. But the rules are the same for every team, so it's a good competition. So, good luck if the event is still ahead of you! You did a great deal of research and tests to get the best possible result! Many others are there just for the fun of it and might go straight down, but you knever know if there is another team that has been working hard too...
@@FliteTest can you have runners out front with like a tow rope as they jump off the end their bodyweight will act like a sling shot as they fall into the water?
Also my 2 cent tower like the liberator. And human weights and a pully system making 2x speed 1 m drop 2m pull so they got the full lenght of lunch pad to get to Max speed..
Guys, you know Peter Sripol, he's worked with you. Check out his iterations of electric ultralight - he abandoned the biplane idea pretty fast. Two wings generate a lot of drag but not too much lift. Parasol or high wing configuration would be best (like fokker D.VIII, single wing mounted on struts). Another upside of such configuration is that you could use cables or struts to reinforce wing by attaching them to wing and fuselage, it'd save a bit of weight too since you wouldn't need as durable spars. Also I'd go for openwork tail construction to decrease weight as much as possible, possibly do it with CF rods (unless they're forbidden) and shift CG strictly with pilot, not extra weight, but I guess with a plane so light as long as the pilot sits where CG should be it should be fine
Make a 2 or 4meter 6 to 12foot lunch Tower.. like the ""liberator"" used.. Use over the front launch human weights.. Make a weel on a triangel to keep launch string off top deck ... if launch pad is duppel as long as the distance to water from deck .. make a 1 turn on the human Wright.. pull dobbelt lenght 2x speed
I recommend the pilot be able to run the plane off of the edge like a hang glider. If you use a launch cart I recommend making it uniformly collapsible so it can drop just before the edge. You don’t want the launch cart to impart a nose down moment on the aircraft when you reach the edge.
No no no tower like the liberator glider.. the added hight made all the difrence.. And human lunch weights over the front dragging the whole Thing up to huge speed.. And speed is all
Your video showed up out of the blue on my feed. I said "Why not?" I very occasionally check out the Flugtag events, but I also used to go to Oshkosh for their annual fly-in event (I live over a thousand miles away from that, now, so... not in the cards anymore). Those were good days. Anyway: looks like you're on the right track for a winning in Flugtag! As noted by a colleague in the video, "If we can go as far as the model did, we got this!" (Or, you know, words to that effect). Lookin' good, guys! I went ahead and sub'd and hit the bell button-- I want to see the finished product WIN!
All about launch speed to be above the stall speed. Your launch platform should be just as important as the plane itself. That and you need a 100 pound friend to win.
It seems like a flying canard design would be better here. More use of life, and it'll be in ground-effect much sooner, so will level the craft quicker
Get the cg "close enough", enough muscle to push or pull it and it'll have a nice flight. If you want to see how far it can go, get the 100 lb young lady with blonde hair to pilot it. Really a great design Flite Test. AirHammer out!!
I am very curious how Your design will perform. I wish for the best headwind, cool head and great intuition of the pilot and strong legs for the pusher team!
Keep in mind that a small breeze would be the scale equivalent of a small gale. 😛 You might want to focus on designing a launching mechanism (if it’s allowed by the rules). The more momentum you can gain on launch, the more you’ll have to work with in the air and airspeed for controlling the glider. Maybe your team jumping off the platform could act like a counterweight to launch the glider, sort of like the Wright Brothers used for their early planes. Alternatively you could build a tall launch platform to give you a little extra height to work with, though it might be harder to push due to weight and air resistance.
The design of your plane is great, but I think one of the ways to win is to build a "launch tower" to increase your height over the water, and if possible, some sort of catapult to increase air speed.
I built a homebuilt aircraft called the Dragonfly (back in 1980) and There was an aircraft called "Hovey Whing Ding II" that is very similar to your design. Great job!
You Guys continue to be amazing in your builds 💪. This Old Man from Washington NC always enjoying your videos 👍. Waiting for the next video. Love you Guys ✈️🧔💝
if you make a cart that the pilot can run off of and with the cart being pushed by the rest of the team you will get a much higher launch speed without any mechanical devices. The length of the cart needs to be long enough to get 4 or 5 steps for the pilot. also make the cart as light as possible too.
The camera person seemed to be missing pointing the camera at what you were doing a lot in this one. Lots of hands working on things just out of frame. Curious to see how far you get in the event!
You could add some vortex generators to the edge of the wing for better better lift at low speeds and make the plane require less speed to make enough lift to fly but at the cost of some drag
Is there a reason you didn't try to go with a longer skinnier wing on a monoplane design to increase the aspect ratio, decrease the drag and maximize the ground effect for this aircraft?
the issue is not really the aircraft, its launching below stall speed. if you can rig up a few pulleys with 2:1 or 3:1 purchase and hook them over the lip of the launching platform then pull a rope get your thingy going faster that will help a lot. or dive immediately and trade height for airspeed. otherwise you're just falling with style.
@@pezpengy9308 Well as some teams seems to have designed and built their kites the night before while under the influence of copious amounts of alcohol I'm impressed that a lot of them don't loose their wings before falling off the ramp.
One minute in and already this genius has a comment....🙄 I wonder why they didn't make a little tool to put holes in the foam? I think I would have put five tips arranged like a 5 on dice attached to a block with a stick handle. Turn that 1/4 turn every time and you'd have a pretty dense pattern. Now to watch the rest of the video and probably find out the answer to my question!
I don't know if this would work. But maybe to prevent pilot error you should test your guy on a zipline. Or him up with a bunch of tranquilizer so he would be super relaxed.
Just remember the old design adage of, K.I.S.S. = Keep It Simple St_pid. But it is looking great. One thing have you thought about building your own launching cart custom to your aircrafts lift geometry and possible atmospherics? Just a thought.
I love your show and all the things you build. But you guys/gals are crazy to go human scale. Did you join the EAA? Member since 1972 and have built 2 planes, one metal one wood and flew them for several years.
Be careful with the all flying tail at low speed. If you hold the stick back at low speed you run the risk of holding the tail fully stalled. So the no elevator control until you let the stick go forward to unstall the tail.
Loved hearing about the Sky Pup as I helped build one and scourer the internet for anything built using foam . That's how I discovered Flight Test and glad I did.
Its looking promising! I agree with changing from a negative wing stagger. I'm not totally convinced that my reasoning is valid, though. Mine has to do with downward flowing air off the trailing edge of the upper wing entraining air and "boosting" lift off the trailing edge of the lower wing. What was your reason for changing?
Bad filming in this episode. (Please point the camera at what people are doing with their hands, that's what we want to see, not the background) Love the design of this plane, it's gonna fly so well :)
I guessed 6 lb cos a KR2 wing is like 12 kilos each. That's fully covered and all composite material and it's a light sport plane, not a Red Bull glider.
Seems take off velocity is vital. 10% faster means 21% more kinetic energy. I'd work on launch proceedings and practice. And any height you can gain on the launch pad already. Can you achieve positive lift before the plane and pilot are in the air? Don't rely on the drop to gain air speed to pull out from. From moment of launch ideally do immediately to gradual glide, if velocity suffices. Disclaimer : not a skilled professional, scared of heights.
"Launch Towers" are not allowed this year. Neither are things like pulleys used to increase the launch speed to more than the crew pulling them. So a lot of the sneaky tricks are not allowed this year. Don't know about high landing gear, but then it can't drop off, see launch tower, and it can't be allowed to hang down and drag in the water, and it adds weight, even more if it can be pulled up...
To save weight, make the tailboom triangular instead of square, it'll be stronger and lighter.
Same, I used this design on my glider. It’s really stronk and ultra light. It only broke at the glue joint connecting it to the main fuselage.
@@_BL4CKB1RD_ 🔴 What Is Islam?
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
More ....
@@1islam1 absolutely nobody cares :):)
@@1islam1 Islam is the drug fueled hallucinations of an illiterate sheep herder.
swept wings work worse at low speeds
I just saw it crash here in Cincinnati. Great to see you guys!!
The transition at 3:30 was 🔥. Good luck with the build!👍
Great job In cincy!!! Killed it. Plane was beautiful!
What you guys have been doing is amazing!!
Impressed with the progress of the flyer! And, love the Bambu print farm!
Excellent design guys! You could have gone even a tiny bit more forward with your CG on the 40% model. That was an impressive glide. Thank you for advancing flight!
+1 for the Ultralight in the future. The ultralight world needs better designs. This ideas its 👍
Always look forward to the builds. Video edit was top notch too!
It was great seeing you guys at Oshkosh AirVenture this year and getting the signatures of everyone at the Flite Test Booth.
Looking forward to assembling the Sea Duck when I next get Home. Also, Thanks for the tips on dropping water balloons on my unsuspecting Neighbor (Countryside).
Oh man! They were there? I missed them. Was too busy looking for Scott Manley I guess
@@jn-ny8bh i only discovered that they had a booth due to Josh being at the RC flight on one of the evenings. Sea Duck someone else had was doing tricks suck as a flat spin and just going YEET right after take off
Has a lot of Promis for sure, however, I think you guys were in ground effect the entire time, You might wanna test it going off something with a much steeper decline to get out of that ground effect, if it glides nicely then, you 100% have a winner.
HELL YEA!! I loved watching y’all win. Saved the best for last🙌🙌
Awesome! I was watching "the best of Flugtag" and one plane was mounted on a "catapult" trolley that went twice as fast as the pushers walking speed. About 2/3 the way through, they pulled a handle and the plane shot off a rail on the trolley. Good luck!
Sadly all forms of mechanical or kinetic lunch, have been written out in the rulebook. It’s much more limiting then previous events. Lower dock in smaller wingspan. But will do our best to get as much speed as possible. :-)
Y'al are awesome!!! @@FliteTest
@@FliteTestthis reminds me of ski jump events where they shorten the downhill length to keep the landings in a safe zone.
Maybe the reason is similar. They have a limited space for the landing zone.
But the rules are the same for every team, so it's a good competition.
So, good luck if the event is still ahead of you! You did a great deal of research and tests to get the best possible result! Many others are there just for the fun of it and might go straight down, but you knever know if there is another team that has been working hard too...
@@FliteTest can you have runners out front with like a tow rope as they jump off the end their bodyweight will act like a sling shot as they fall into the water?
Also my 2 cent tower like the liberator. And human weights and a pully system making 2x speed
1 m drop 2m pull so they got the full lenght of lunch pad to get to Max speed..
See you there!
Guys, you know Peter Sripol, he's worked with you. Check out his iterations of electric ultralight - he abandoned the biplane idea pretty fast. Two wings generate a lot of drag but not too much lift. Parasol or high wing configuration would be best (like fokker D.VIII, single wing mounted on struts). Another upside of such configuration is that you could use cables or struts to reinforce wing by attaching them to wing and fuselage, it'd save a bit of weight too since you wouldn't need as durable spars. Also I'd go for openwork tail construction to decrease weight as much as possible, possibly do it with CF rods (unless they're forbidden) and shift CG strictly with pilot, not extra weight, but I guess with a plane so light as long as the pilot sits where CG should be it should be fine
I've always wondered why no-one uses Slats or slots in these? I mean they start off practically in a stall, so it should be a great help.
tbh probably cuz extra weight and complexity
Also they probally wont do much at the really low AOA these aircraft will fly at
Next version look at Fieseler Storch with leading edge slats. You want a STOL plane so add those slats!
You guys are legends❤
the Mennen Speed Stick on the desk is a nice touch Josh ;)
It’s so cool to see the real thing starting to be built. Are you going to make the new Eclipson Cobra?
The OG Josh Scott makes a cameo and nobody notices. 😮 Josh Scott we miss you. Come do a vid with Bixler. Old School.
Best wishes, and we are all pulling for a record win! BTW… I guessed 5lb for the wing structure!
Flies like the Wright flyer
Make a 2 or 4meter 6 to 12foot lunch
Tower.. like the ""liberator"" used..
Use over the front launch human weights..
Make a weel on a triangel to keep launch string off top deck ... if launch pad is duppel as long as the distance to water from deck .. make a 1 turn on the human Wright.. pull dobbelt lenght 2x speed
I recommend the pilot be able to run the plane off of the edge like a hang glider. If you use a launch cart I recommend making it uniformly collapsible so it can drop just before the edge. You don’t want the launch cart to impart a nose down moment on the aircraft when you reach the edge.
No no no tower like the liberator glider.. the added hight made all the difrence.. And human lunch weights over the front dragging the whole Thing up to huge speed..
And speed is all
Your video showed up out of the blue on my feed. I said "Why not?" I very occasionally check out the Flugtag events, but I also used to go to Oshkosh for their annual fly-in event (I live over a thousand miles away from that, now, so... not in the cards anymore). Those were good days. Anyway: looks like you're on the right track for a winning in Flugtag! As noted by a colleague in the video, "If we can go as far as the model did, we got this!" (Or, you know, words to that effect). Lookin' good, guys!
I went ahead and sub'd and hit the bell button-- I want to see the finished product WIN!
All about launch speed to be above the stall speed.
Your launch platform should be just as important as the plane itself. That and you need a 100 pound friend to win.
It seems like a flying canard design would be better here. More use of life, and it'll be in ground-effect much sooner, so will level the craft quicker
Holler if you ever want a bored old retired Soldier to help build stuff. I’d love to see the shop in action.
That mirror transition with the mini drone was awesome lol
WOW!! Far OUT!!
Get the cg "close enough", enough muscle to push or pull it and it'll have a nice flight. If you want to see how far it can go, get the 100 lb young lady with blonde hair to pilot it. Really a great design Flite Test.
AirHammer out!!
Starting to look pretty solid.
Very cool guys!
You must get the launch right, to many times I see em stall, and plop strait into the drink!
The leading edge connecting the two main wings should be tapered like a knife to reduce weight and drag. Less drag=more glade distance
I am very curious how Your design will perform. I wish for the best headwind, cool head and great intuition of the pilot and strong legs for the pusher team!
I have a question.. At 8:47, Is that a 1950s model Cessna 310?
Keep in mind that a small breeze would be the scale equivalent of a small gale. 😛
You might want to focus on designing a launching mechanism (if it’s allowed by the rules). The more momentum you can gain on launch, the more you’ll have to work with in the air and airspeed for controlling the glider. Maybe your team jumping off the platform could act like a counterweight to launch the glider, sort of like the Wright Brothers used for their early planes.
Alternatively you could build a tall launch platform to give you a little extra height to work with, though it might be harder to push due to weight and air resistance.
14:53 Finally Americans are using the bare hand instead of using a catapult
It was wonderful
It was a blast seeing you guy's at Oshkosh.
Fully flying stabilizer will be helpful if you go transonic!!!
good job on this!
The design of your plane is great, but I think one of the ways to win is to build a "launch tower" to increase your height over the water, and if possible, some sort of catapult to increase air speed.
Just put an engine in it that'll win for sure! 🥴
"Launch towers" are not allowed! 😱😁👍👍🇺🇲
@@RadicalEdward_115 not allowed! 😱😁👍👍🇺🇲
@@TinyHouseHomestead but- but- but winning is everything!
Launch towered setups always do best it allows the rig to Drupal longer and pickup speed to load the wings and get lift
I built a homebuilt aircraft called the Dragonfly (back in 1980) and There was an aircraft called "Hovey Whing Ding II" that is very similar to your design. Great job!
You Guys continue to be amazing in your builds 💪. This Old Man from Washington NC always enjoying your videos 👍. Waiting for the next video. Love you Guys ✈️🧔💝
if you make a cart that the pilot can run off of and with the cart being pushed by the rest of the team you will get a much higher launch speed without any mechanical devices. The length of the cart needs to be long enough to get 4 or 5 steps for the pilot. also make the cart as light as possible too.
Awesome!
Super bro 🎉🎉
The camera person seemed to be missing pointing the camera at what you were doing a lot in this one. Lots of hands working on things just out of frame. Curious to see how far you get in the event!
Winchester ammo sponsored by pcb way. Your desk is spectacular Josh haha!!😊
Lol. We have a ground hog problem on the grounds. ;)
@@FliteTest I'm jealous. If I ever visit from Australia I'll get to work helping clear that up for you.
You could add some vortex generators to the edge of the wing for better better lift at low speeds and make the plane require less speed to make enough lift to fly but at the cost of some drag
1:45 - Josh is back ?
Would you be allowed to use a kind of block and tackle to do a hand tow? That might impart more speed for the launch.
00:35 called fingers
Great job looking forward to next week.
Is there a reason you didn't try to go with a longer skinnier wing on a monoplane design to increase the aspect ratio, decrease the drag and maximize the ground effect for this aircraft?
the issue is not really the aircraft, its launching below stall speed. if you can rig up a few pulleys with 2:1 or 3:1 purchase and hook them over the lip of the launching platform then pull a rope get your thingy going faster that will help a lot. or dive immediately and trade height for airspeed. otherwise you're just falling with style.
Apparently they've rewritten the rules so that's not allowed this year.
@@blahorgaslisk7763 well, falling with style isnt necessarily a bad thing! :)
@@pezpengy9308 Well as some teams seems to have designed and built their kites the night before while under the influence of copious amounts of alcohol I'm impressed that a lot of them don't loose their wings before falling off the ramp.
You have to do a rubber cor launch then you are going huge!!!
Better run it by Dave first Josh. Lolol.
This one is better than last. Ty
CONGRATULATIONS LOL. TAKE CARE
One minute in and already this genius has a comment....🙄
I wonder why they didn't make a little tool to put holes in the foam? I think I would have put five tips arranged like a 5 on dice attached to a block with a stick handle. Turn that 1/4 turn every time and you'd have a pretty dense pattern.
Now to watch the rest of the video and probably find out the answer to my question!
Long time fan, love your channel, but not a fan of the pulsating music when you all are talking. Might be just me. Again love your channel
no they need help.
I don't know if this would work. But maybe to prevent pilot error you should test your guy on a zipline. Or him up with a bunch of tranquilizer so he would be super relaxed.
Just remember the old design adage of, K.I.S.S. = Keep It Simple St_pid.
But it is looking great. One thing have you thought about building your own launching cart custom to your aircrafts lift geometry and possible atmospherics? Just a thought.
Next year, triplane!
Can you do a carrier for that you can take on and land
Is also my b day
im going to flutag and ill see them there
Gorilla glue and the coffee mug, sounds like an emergency delivery to an engineer to me😂
You need to get Adam Savage to come in and paint that Iron Giant
Its just the beginning in 10 years they will start a airline
Will you motorise the model?
I love your show and all the things you build. But you guys/gals are crazy to go human scale. Did you join the EAA? Member since 1972 and have built 2 planes, one metal one wood and flew them for several years.
Be careful with the all flying tail at low speed. If you hold the stick back at low speed you run the risk of holding the tail fully stalled. So the no elevator control until you let the stick go forward to unstall the tail.
mirror mirror on the wall - which lil miss piggy is the fairest of them all?
6:27 basically!!!!!
do you guys ship the plane kits to poland?
You need to use the Cool Runnings strategy and use Jamaican sprinters to push the plane off the ramp.
Put vortex genarators on the leading edge?🤔✈️🕊️🌍💞💗
You guys need to make a dc-10
Congrats 🎉🎊🎈
Loved hearing about the Sky Pup as I helped build one and scourer the internet for anything built using foam . That's how I discovered Flight Test and glad I did.
Do you think these guys will ever try attempt to upload higher than 1080 :(
Nice video.Does PCBWay ship to Africa?
Ml 🙏 for blessing for you all
Its looking promising! I agree with changing from a negative wing stagger. I'm not totally convinced that my reasoning is valid, though. Mine has to do with downward flowing air off the trailing edge of the upper wing entraining air and "boosting" lift off the trailing edge of the lower wing. What was your reason for changing?
Genius! Just make sure you don't go full Howard Hughes...
I would love building a DR-1 with this technique, it looks strong and light, rather than conduit and wood.
I really want to guys to build a full size b17 :P
Bad filming in this episode. (Please point the camera at what people are doing with their hands, that's what we want to see, not the background) Love the design of this plane, it's gonna fly so well :)
I guessed 6 lb cos a KR2 wing is like 12 kilos each. That's fully covered and all composite material and it's a light sport plane, not a Red Bull glider.
2:01 basically!!!!!!!!!!!!
I wanna do what you guys do. Make a vid on how you all got here, and how you made yourselves who you are today.
Amazing video
Thanks!
@@FliteTest No problem, just keep making awesome videos
Pink foam is lighter. I tested it between greenguard and foamular.
Yahoooooo!
Not scale speed?
Seems take off velocity is vital. 10% faster means 21% more kinetic energy.
I'd work on launch proceedings and practice. And any height you can gain on the launch pad already. Can you achieve positive lift before the plane and pilot are in the air? Don't rely on the drop to gain air speed to pull out from. From moment of launch ideally do immediately to gradual glide, if velocity suffices. Disclaimer : not a skilled professional, scared of heights.
"Launch Towers" are not allowed this year. Neither are things like pulleys used to increase the launch speed to more than the crew pulling them. So a lot of the sneaky tricks are not allowed this year.
Don't know about high landing gear, but then it can't drop off, see launch tower, and it can't be allowed to hang down and drag in the water, and it adds weight, even more if it can be pulled up...
What about a wind tunnel? 🤯😱