Start to Finish Sliding Glass Door Install
Вставка
- Опубліковано 4 жов 2024
- Installing the Cheapest Sliding Pation Door I could get! Lowes Pella 150 Series door.
www.lowes.com/...
As an Amazon Associate I Earn from Qualifying purchases.
Amazon Affiliate Links
Sideswiper 2 siding removal tool - amzn.to/3Pppwiw
Music -
ENGINE by Alex-Productions | onsound.eu/
Music promoted by www.free-stock...
Creative Commons / Attribution 3.0 Unported License (CC BY 3.0)
creativecommon....
installing new sliding doors is always good, but I want to share with you my experience, I live in Orlando Florida, I contacted the Masterslide company with the problem of my sliding doors (if you ask, I will share the contacts) they replaced the rollers, installed a track cover and a new handle with a lock. Now my door is like new and I'm as happy as a child! And most importantly, I thought that I saved more than two thousand dollars! Just because repairs are cheaper!))) so think before ordering new ones. This is not advertising, this is my case.
I probably would’ve measured 3 inches side to side and top and put a 5/4 around the outside you doing a good job just a lot of work
@@clarencejackson5284 yeah I made extra work for myself, but it doesn’t leak so fine by me. Thanks for watching!
It might be a good idea to mark your siding with a piece of tape with a number on it so you can put them back in the same order. Walls are rarely perfect top to bottom.and you may end up with gaps if you don't put the siding back in the same order.
@@MAGAMAN great idea. Thanks for watching.
Nicely done.
One thing that could have been done better was the application of the "protector wrap". It would have been better to get it in behind the house wrap the best you could. With the "protector wrap" on top of the house wrap water that gets in behind the house wrap from above now has a chance to get behind the "protector wrap". I doubt that's likely to cause any problems but just a nit pick I noticed.
It’s a debate between me and my buddy! I like it under, he likes it over…lol
I also got the primer for the wrap flashing so it would adhere better. Im going into brick so the flashing is alittle tricky but im going with vinyl trim to match the door cladding
I haven’t done one over brick, but it definitely sounds like you’re on the right track.
is this a right door because it opens from the right ( on the inside) or a left side because.it slides from right to left im confused
@@jonathanc8513 when looking from the outside the left side slides.
@@ScienceMonkey00 thank you!
My house was built in 1967 is the ranch so the windows are up high I'm sure I can't even see out of my windows how do I fix that do I lower the windows remove the brick and bring the window down or replace it with new windows
How long is the total time to remove and install?
How much time should a handyman charge, that does this for a living?
@@SkiBumLee it took me the day with my buddy. I could have done it quicker if I didn’t remove the siding. Depends on where you live, but i would imagine a handyman would charge anywhere from 500-1000. Might have to factor in any trim work as well.
I'm about to buy one of these for the west side of the house in a bedroom / sunroom. How are these in winter? Is the insulation good enough
@@JayH-y1z yes, I’ve noticed significant improvements in both summer and winter with this door.
Noob question here I know but......when they say left or right sliding, is that standing inside or out ?? Can't tell when purchasing on- line.
Hello, it’s from standing outside. Thanks from watching!
@@ScienceMonkey00 Awesome, thank you for responding !!
Thank you man I was wondering too lol
@@Redheadkingpinn are you laughing at a dumb question ?? lol
@@teresa6775 I’m laughing, because even the lowes manager didn’t know the Which one to choose
What’s the material for the extension jams?
Primed finger jointed pine
I would have just fixed the rollers on the old door and cleaned out the tracks
I did that initially, and it did nothing. The glass on this door was shot as well, so it was time to go.
I have concrete siding so planning on cutting the flange... comment?
Yep, that can be done. My buddy actually recommended it first this but I decided to keep it.
Please tear off siding from the top down. 😂🤣
Lol. I know when looking back that would have made my life so much easier! 😂😂😂
Poorly done. You make us watch you remove each and every siding piece.
Nope. Excellent video especially for folks who have never done this before.
I mean, if you didn't want to watch the siding removal, you could have just skipped forward... 👍