Check out our Amazon Affiliate Store www.amazon.com/shop/gunsandgearnetwork for many of the products we review, use and recommend. There is no additional cost to you and it helps support our channel. Please share our videos and other 2A friendly gun channel videos to help get the word out and fight the silencing of our voices. Don't forget to Like, Share and Subscribe!!
Recently bought a cricket, another vid had a Paracord lanyard on the cocking knob to make it easier to pull with a scope on. Great video very helpful 👍
Haha, great minds think alike as they say. I did something similar, with a few minor differences. * Ran a small bit of leader material through the knob with a fishing swivel in the middle (prevents twisting) and attached it to the trigger guard so as not to lose the knob. * Cut a slot in the top of the stock for the trigger to fit in. It provides protection for the trigger and lets the disassembled rifle to fit together tightly (held with a 1.5-inch wide Velcro strap). * Replaced the Phillips screws in the butt plate with counter sunk D-ring screws, for tool free access. * I used an 8ft length of paracord doubled over and twisted like rope, I was going for lightness and versatility. I figure at least half of the outer cord sheath and all the inner strands could be used for other things, if necessary, while still leaving enough outer cord for a sling. * I opted for no optic to save size and weight. The rifle fits nicely in a small camera tripod case. Great job and very informative video... well done.
I used the little cricket .22lr pistol but I put the aluminum chassis on it. Went with the primary arms cyclops etched reticle so I don't have to rely on batteries. On the chassis I put the SB tactical folding brace on it. That set up fits perfect in my little Camelback backpack. That way I don't have to take it apart. I'm thinking about getting the Primary Arms 1-4 with the mill dot reticle only because the older I get the worst my eyes get. Good video over all
About the same idea as Ohio wolverine. I bought my granddaughter a cricket when she was 5 she's outgrown it. Looks like Papa has a new addition to his backpack. Thanks for the video.
Love it! Got one feom a neighbor for $20! Getting ready to pink & purple tiger stripe for my 9-year old little girl to take her training on it! Definitely interested in doing this conversion as well! Being that you've painted this exactle rifle, do you have a particular paint you would recommend, sir? Thanks for the video and any information you are able to share!
Great setup!! I could make a little padded sleeve for the barrel. LOVE all the survival equipment you integrated. Very smart! ? How much does this little guy weigh? And what would I search for on the metal knob to replace the plastic.? Thx much!! Ps - other ?. Does that knob need to be cocker each time so rack a new round? Or is that more of a safety. Thx again.
Check out our Amazon Affiliate Store www.amazon.com/shop/gunsandgearnetwork for many of the products we review, use and recommend. There is no additional cost to you and it helps support our channel. Please share our videos and other 2A friendly gun channel videos to help get the word out and fight the silencing of our voices. Don't forget to Like, Share and Subscribe!!
My kids each have a Cricket that they have outgrown, I guess Dad has a new survival rifle lol, great video and awesome idea.
Recently bought a cricket, another vid had a Paracord lanyard on the cocking knob to make it easier to pull with a scope on. Great video very helpful 👍
Haha, great minds think alike as they say.
I did something similar, with a few minor differences.
* Ran a small bit of leader material through the knob with a fishing swivel in the middle (prevents twisting) and attached it to the trigger guard so as not to lose the knob.
* Cut a slot in the top of the stock for the trigger to fit in. It provides protection for the trigger and lets the disassembled rifle to fit together tightly (held with a 1.5-inch wide Velcro strap).
* Replaced the Phillips screws in the butt plate with counter sunk D-ring screws, for tool free access.
* I used an 8ft length of paracord doubled over and twisted like rope, I was going for lightness and versatility. I figure at least half of the outer cord sheath and all the inner strands could be used for other things, if necessary, while still leaving enough outer cord for a sling.
* I opted for no optic to save size and weight.
The rifle fits nicely in a small camera tripod case.
Great job and very informative video... well done.
I used the little cricket .22lr pistol but I put the aluminum chassis on it. Went with the primary arms cyclops etched reticle so I don't have to rely on batteries. On the chassis I put the SB tactical folding brace on it. That set up fits perfect in my little Camelback backpack. That way I don't have to take it apart. I'm thinking about getting the Primary Arms 1-4 with the mill dot reticle only because the older I get the worst my eyes get. Good video over all
About the same idea as Ohio wolverine. I bought my granddaughter a cricket when she was 5 she's outgrown it. Looks like Papa has a new addition to his backpack. Thanks for the video.
Booligan has a file for a chassis.
Love this idea but having trouble finding a buttstock pack like you have here.
Good idea! Thanks!
Love it! Got one feom a neighbor for $20! Getting ready to pink & purple tiger stripe for my 9-year old little girl to take her training on it! Definitely interested in doing this conversion as well! Being that you've painted this exactle rifle, do you have a particular paint you would recommend, sir? Thanks for the video and any information you are able to share!
Great setup!! I could make a little padded sleeve for the barrel. LOVE all the survival equipment you integrated. Very smart!
? How much does this little guy weigh? And what would I search for on the metal knob to replace the plastic.?
Thx much!!
Ps - other ?. Does that knob need to be cocker each time so rack a new round? Or is that more of a safety. Thx again.
Where did you buy the stock bag to store things?
Amazon
@@GunsandGearNetwork Can you tell me the model because I have already tried several ways and it doesn't work please. Thank you
Which scope mount do you have?
I think it is one from Keystone. Been along time since I bought it.