1999 Toyota 4Runner - Transponder Key Programming
Вставка
- Опубліковано 7 тра 2018
- This is a video on the procedure necessary to program the transponder keys on a 1999 Toyota 4Runner Limited. Should work for other years as well.
I got my new transponder keys super cheap from this eBay seller:
stores.ebay.com/yourkeysupplier/
Straight forward! Thanks, everybody for watching.
Thanks for the video, I just did it on my 1999 Echo and it worked great!
Great. Glad it helped.
thanks to this video I programmed my new switch cylinder lock with two keys wwith transponder
Lalo Did you brought the key inigtion cilinder? And put it on
It worked with a copied key
Thanks.
Any chance you know how to program the remote key fob and/or which part numbers will work on which Toyotas? 1999 Sienna in particular. Thanks, Rich
thanks for the video today I install new switch cylinder and myself program the key with transponder in my 4runner 99 limited
Hi How did you program your new key? Did you program it yourself?
Excellent, thanks!
Did you install new switch cylinder ignition?
first off great vid!!! now my question? I have an 00 limited with the original chipped key ziptied under the dash inside the original ignition ring plugged into the truck/ECU? (bought the truck and stumbled onto this) pulled it out and that key goes into the ignition but wont turn it.. I'm guessing new ignition and they bypassed the smart key.. now can I put the ignition ring back on and buy a blank chipped key and program it using the old chipped key? seeing it doesnt have to turn when programming? or is the ignition itself wired to part of the ecu? I know there is to plugs on the ignition ring one for 12v to light up the ring and one for security. right now I have the new ring plugged in for light only the old one is under the dash plugged into the security with original key wired to it.. it's a mess I want to clean up... thanks for any info
Any help if it dont work
Works for Prado 90 series
does this work on a 1999 Toyota Landcruiser (100series)???
Puedo copiar el chip de otra llave que no sea la del chip original (osea de otra copia?
Do I have to have the master key? Because I only have the valet key
I'd like to know as well.
Would this be the procedure for a 2000 Camry?
From what I just saw online, I believe it is.
@@gregmonchak8423 Thank you. My key will be here tomorrow, Ill give it a try.
Can you program a key without the original radio
Didnt work for my 99 4runner....
Do i have to cut the new key first? What if it doesn't work?
Yes, key must be cut first. Check key first to make sure turns lock cylinder before beginning programming sequence.
Here is the problem, i have only 1 key and it's not the original ( master key ) but a copy. Now problem 2. It broke, leaving half key in. I need to buy maybe 2 keys but now the 1 key i had is broken. Will it still work with only a 1 inch going in the ignition once removal of the rest of key?
No, you will have to take a trip to dealership if you can get that key fragment out without damaging cylinder tumblers, they can order a pre-cut master key that should be pre-programmed (depends of your ECM serial) to work. From there you can now go get some cheap keys like these and make some copies from that new master. Good luck.
@@gregmonchak8423 thanks
Because I lost the keys and I need news
I can't get this to work to save my life. It is like it won't go into programming mode at all
Did you ever figure it out? I’m in the same situation
Thanks Greg. I guess this system was invented by some guy with OCD. LOL.
Joe Primal 😂😂😂