Great job you guys do. love watching your videos full of action 100mph work pace lol Looks like Josh is going to be a good addition to the team . Keep up the good work
Great video. Feature length 😁. If there's a sequel, could we see some more about the electrical side of the install? I.e. cabling from mains to room, and first fix? I appreciate this would usually be the job of a qualified spark and not a DIYer but I'm asking moreso out of interest.
Enjoy watching the videos and seeing the end result, but like somebody else said, it’s like everything 100mph, slow down and delegate, give the other guys a chance, and remember health and safety. Keep up the great work.
Your garden rooms are awesome very informative keep the videos coming just wished I'd known about you couple of years ago would of definitely had you build my workshop.👍
Hello I am an avid watcher of your channel and your videos get better as time goes on. I noticed your comment about drilling the holes perfectly straight for the wood to fit on the metal bars. If you screwed 2 3x2 together to make 90 degree corner and then rested the drill in the corner and you wood get perfect holes every time
Great video , get urself a impact wrench , u should put rods down further into the ground so u could get a deep reach socket onto the nuts then grind them off
Come on Liam, use the reverse switch on the milwaukee. Work smarter not harder, so they say. Love the work andove you giving guys an opportunity to work along side you.
Please look after your eyes, glasses (light eye protection) are not safe enough for grinders, you need impact resistant goggles. Each spark is 3000 degrees, one in the eye can blind. Take care all. Love the vids and the work.
I always have spare pairs in van and give them away if someone without Had accident when apprentice even with goggles Its no fun having your eyes flushed believe me
Great vid...When drilling the large holes for the steel rods, try an impact driver/wrench with a 'Irwin Blue Groove Wood Drill Bit'. It will go through timber easy using one hand.
Hi Liam, Thanks for a great insight to these projects. Do you have any build using an existing concrete base without using the rod and shoe approach? I want to build two sheds; 1st job is a tool shed 2600 x 1300 base x 2500mm high (pitched roof) on an existing concrete base. 2nd job is a larger flat (EPDM covered) roof workshop 4500 x 2500 base x 2400 tall on a soil/gravel base. That abuts the back of the house. Would you help with any video links that advise on timber cross sections and build technique? Many thanks and keep the tutorials coming. Dave
Hi Liam love the videos, right up my street. I’ve been doing garden rooms for a few years but not with a foundation like yours. I was just wondering is it worth making hole a bit deeper and putting in say 250-300mm of concrete and letting that harden, then use your system. That way rod can never go right through. It could be overkill. What do you think?
THE BLOKE SPEAKING IS GREAT WITH THE NAIL GUNS HE MUST BE THE BOSS AND JEN THE CAMERA GIRL IS GOOD AT TAKING THE PICTURES PLUS GREAT AT KICKING CORNERS IN LOL,WHERE IS THE VIDEO WITH THE FINISHED SHED PLEASE
I've been waiting for a build on an existed concrete base to see how it's done. Have exactly the same situation at mine and want to know how you account for the height of the concrete base in your overall permitted development height? Maybe you're lucky and there's higher points in the garden which I don't have.
We always use 22mm mate, local suppliers in leeds always have either Egger protect, egger easy peal or just Egger standard , have to take what ever they have atm
Hi there. I was thinking to ask you something. On the timber frame walls they do on the corner one more 2/4 for the drywall. I was wondering why don't you put that corner timber post?
Hi Liam and Team just a general question. I haven’t seen you do many installations of skylight windows - is it just because clients don’t want them or is there another reason?
Your videos are great to watch but please start taking H&S a bit more serious. Davie looking along the line of the battens without any eye protection while the Paslodes are being used - it is an accident waiting to happen and you only get one eyesight in this life, no second chance.
Great vid yet again. Sent you a message via your website earlier today. Would appreciate it if you could have a look and come back to me with any thoughts. Cheers 👍
It seems really rushed and the lads who are working for the guy who’s doing the video have been hand picked from a pub Sunday afternoon after sinking 9 pints of brave and asked to work Monday morning
Love the way the lads cut the cake give me the giggles 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Love it when the lads explain it to the audience 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
The man and his workers do a fantastic job 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
The man and his lads give me the giggles 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Another great video. Long and very enjoyable 😃😃.
videos only been on youtube 3 min and ive just watched from start to finish, love it!
Great job you guys do.
love watching your videos full of action 100mph work pace lol
Looks like Josh is going to be a good addition to the team .
Keep up the good work
This is like poetry in moti9n....watching you direct the team to follow and fill in behind your lead...it is a treat to watch, thanks.
Thank you for your comment mate 🙏🏻
Great video. Feature length 😁. If there's a sequel, could we see some more about the electrical side of the install? I.e. cabling from mains to room, and first fix? I appreciate this would usually be the job of a qualified spark and not a DIYer but I'm asking moreso out of interest.
Thanks Liam, crystal clear on how to do it,, might even give it a go myself sometime , keep em coming, always a great watch
Enjoy watching the videos and seeing the end result, but like somebody else said, it’s like everything 100mph, slow down and delegate, give the other guys a chance, and remember health and safety. Keep up the great work.
It’s how my mind is wired, if I’m not going fast it doesn’t work for me 🤷♂️
Dicovered your channel the other day and now I've watched tens of garden rooms going up! Wonderful stuff thank you!
Brilliant leadership, brilliant teamwork. Love watching.
Fabulous to watch such skilled tradesman instructing...thank you
Radio mike and gimble make a huge difference , looking and sounding very professional
Brilliant video mate... I notice you're very good communicator, with a good sense of humour... All good bosses have that quality... 😎👍
Nice work, much smoother video thanks. Love this channel.
Josh looks passionate, be good to see him in future videos.
Your garden rooms are awesome very informative keep the videos coming just wished I'd known about you couple of years ago would of definitely had you build my workshop.👍
Another Great Presentation, 👍 pint in one hand and settling in to watch the rest!
Hello I am an avid watcher of your channel and your videos get better as time goes on. I noticed your comment about drilling the holes perfectly straight for the wood to fit on the metal bars. If you screwed 2 3x2 together to make 90 degree corner and then rested the drill in the corner and you wood get perfect holes every time
Great video as usual ,keep up the great work and vids ,look forward to seeing the live vid
That is great video and you have made some good memories for the future. A live build would be great to see!
Great video to watch, always interesting, cheers
Great video , get urself a impact wrench , u should put rods down further into the ground so u could get a deep reach socket onto the nuts then grind them off
Digging is tough enough mate, deeper would take longer snd break some balls 🙈
Haha keep up the good work
Seems a very hectic job site !! Buildings look spot on when they are finished though 👍
I’ve been gagging for another video!! Can’t wait to get stuck in!
Come on Liam, use the reverse switch on the milwaukee.
Work smarter not harder, so they say.
Love the work andove you giving guys an opportunity to work along side you.
Love the vids. Is there a part 2? Don't leave us hanging dude. 👍🏽
Nice long video 💯👌
Keep doing what you do best
👍🇬🇧👍🇬🇧👍🇬🇧👍🇬🇧👍🇬🇧👍
This video is a marathon, love it 😁
hopefully not too boring for you mate
@@thegardenroomguru far from boring. Brilliant video as per.
Liam, your work ethic and the constant awareness of your team and their welfare is fabulous to watch play out. I felt like I was on the building site!
Thanks
@@thegardenroomguru If Jen don't mind recording, I would happily sit and watch the full build like this.
Jon is hilarious lol 😂 😂 John is type of guy you want with you in a Job you hate doing
great vid again,get yourself a milwaukee chainsaw,you will not look back
happy birthday...and thanks for all the tips
Brilliant video thank you 👁️♥️👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Please look after your eyes, glasses (light eye protection) are not safe enough for grinders, you need impact resistant goggles. Each spark is 3000 degrees, one in the eye can blind. Take care all. Love the vids and the work.
Yes your right I work in a garage and have learnt the hard way 😜
I always have spare pairs in van and give them away if someone without
Had accident when apprentice even with goggles
Its no fun having your eyes flushed believe me
Love the idea of a 24hr build :-)
less haste more speed. Absolute ***king cowboys!
Great vid...When drilling the large holes for the steel rods,
try an impact driver/wrench with a 'Irwin Blue Groove Wood Drill Bit'.
It will go through timber easy using one hand.
gotta love the milwaukee
Another Great Video again you’re the BEST 👍🏻
Bosch 18v combi drill would fly through the wood for the shoes, the pro one with the metal chuck.
Хорошая работа.
Happy birthday John...nicecake knife.!
Happy Birthday John 🎂🎂🍻🍻
brilliant mate this length video was really good and the live one should be a laugh.
🔨 enjoyed watch all your builds
Hi Liam,
Thanks for a great insight to these projects. Do you have any build using an existing concrete base without using the rod and shoe approach?
I want to build two sheds; 1st job is a tool shed 2600 x 1300 base x 2500mm high (pitched roof) on an existing concrete base.
2nd job is a larger flat (EPDM covered) roof workshop 4500 x 2500 base x 2400 tall on a soil/gravel base. That abuts the back of the house.
Would you help with any video links that advise on timber cross sections and build technique?
Many thanks and keep the tutorials coming.
Dave
Terrible your spark never told you off for keeping extension lead coiled up when in use 🤪😂
Great work as always tho!
Hi Liam love the videos, right up my street. I’ve been doing garden rooms for a few years but not with a foundation like yours. I was just wondering is it worth making hole a bit deeper and putting in say 250-300mm of concrete and letting that harden, then use your system. That way rod can never go right through. It could be overkill. What do you think?
When you join two timbers together you could half lap the joint then put the plates on
Great job again
The boss is by far the best worker give him 2 nail guns and he's away
Sometimes you’ve got to give your rod a little bit of a thrust..LOL
I need to work with this Crew.
Use a Irwin blue flat bit for your holes. Honestly so much easier!
Looking to by petrol chainsaw for normal DIY work
What model is your Sthil
THE BLOKE SPEAKING IS GREAT WITH THE NAIL GUNS HE MUST BE THE BOSS AND JEN THE CAMERA GIRL IS GOOD AT TAKING THE PICTURES PLUS GREAT AT KICKING CORNERS IN LOL,WHERE IS THE VIDEO WITH THE FINISHED SHED PLEASE
It’s not finished yet mate
So much better with the gimbal 👍
I belive the beam in the middle is a jack wall👍could be wrong but it's 10 to 2 in the morning and my brains fried😂
He no his stuff where the fuck do he get his energy from he don't mess about
The best
Fab work
Anyone else feeling like buying themselves a 2nd nail gun, just so they can do the Liam double whammy trick? Or is that just me
H and s 110v and ear protection needed on most sites now👍🏴
I've been waiting for a build on an existed concrete base to see how it's done. Have exactly the same situation at mine and want to know how you account for the height of the concrete base in your overall permitted development height? Maybe you're lucky and there's higher points in the garden which I don't have.
There’s still some concrete showing mate, we take our height off this 👍🏼
@@thegardenroomguru Thanks. Will be interested to see the dimensions of this build. Hopefully the indoor height doesn't suffer too much :)
Where do you get your 18mm osb3 t&g, I can't find it anywhere local to me (pembroke, south Wales) thanks
We always use 22mm mate, local suppliers in leeds always have either Egger protect, egger easy peal or just Egger standard , have to take what ever they have atm
Hi there. I was thinking to ask you something. On the timber frame walls they do on the corner one more 2/4 for the drywall. I was wondering why don't you put that corner timber post?
It’s easier to insulate this way mate
What is that pencil tool you use please.?
You get them from toolstation there called tracer
yeah live would be a good thing to watch
Cracking video, bring on a live one 💪
"Fucking hell whose the driver" hahaha that had me belly laughing!
Heavy handed why you need to drill like that.?
Live would be great
New drinking game. Every time Liam says Davey you take a drink 😂😂
😂😂😂 Or 'got any 63s'
@@sambuckland1987 63s its a single shot. 90s are a double shot 😂😂
Well about time Shaggy, Welcome back lol
Do you not use treated wood for the base?
It’s all treated mate
I like , but washers under nuts ?
Screw the flash liam griffin is the fastest man on the planet, awesome
if you cut the notches before drilling there's less timber for the drill to go through might save burning out the drills
Hi Liam and Team just a general question. I haven’t seen you do many installations of skylight windows - is it just because clients don’t want them or is there another reason?
It increases the overall height and the vast majority of ours are permitted development meaning we have to stay under 2.5 mate 👍🏼
@Jennie Bulmer I’d love to put one in 😎
What was wrong with the first hammer handed to you beings as you couldn’t use it .?
It’s john’s, if it’s not your hammer, they just feel really uncomfortable and alien 👍🏼
Dream team
Good of Billy Idol to join the team
thought that myself lol surfer boy/ punk ' bet he likes a smoke!!
I see why your drills are burning out. 😆🤣
Happy birthday John 57 😁😁😁😁😁😅😅😅😅😅
Sleeper wall
Could just use end of the hammer instead of the chisel
A live build would be the dogs danglies. (I skipped to the end to see where this build got up to before watching all of it).
1.5 hours long f/off I’m watching et again
speedy gonzalay lol
sleeper wall!
That’s the one !
Your videos are great to watch but please start taking H&S a bit more serious. Davie looking along the line of the battens without any eye protection while the Paslodes are being used - it is an accident waiting to happen and you only get one eyesight in this life, no second chance.
sleeper wall
Don’t shout mate, the mic picks you up just fine speaking normally. Great tutorial though!
Great vid yet again. Sent you a message via your website earlier today. Would appreciate it if you could have a look and come back to me with any thoughts. Cheers 👍
When did Machine Gun Kelly become a Joiner ?
And you wonder why you burnt out every drill?
Because they are not fit for purpose, right drill right hole 😉
It seems really rushed and the lads who are working for the guy who’s doing the video have been hand picked from a pub Sunday afternoon after sinking 9 pints of brave and asked to work Monday morning
Strange comment, but your entitled to your opinion I guess.
Ops sorry John 47 😅😅😅😅