How to Replace Intake Manifold 2011-2015 Chevy Cruze
Вставка
- Опубліковано 28 сер 2022
- Buy Now!
New Intake Manifold from 1AAuto.com 1aau.to/ib/DMEIM00007
This video shows you how to install a new intake manifold on your 2011-2015 Chevy Cruze. The intake manifold is responsible for delivering the fresh outside air into the engine, and is also sometimes where the fuel is adding to the air mixture. A cracked or leaking intake manifold can cause a variety of problems for your engine, and should be replaced.
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• E10 Socket
• T30 Socket
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oa/1AXSS00035
• Engine Oil
• Paper Towels 1aau.to/oa/1AXSS00035
• 5mm Hex Socket
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
![How To Replace Intake Manifold Chevrolet Cruze [1.8L 1st Gen 2011-2016]](http://i.ytimg.com/vi/4jVRCuzPVzs/mqdefault.jpg)
![How To Replace Intake Manifold Chevrolet Cruze [1.8L 1st Gen 2011-2016]](/img/tr.png)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Just did this today. Took my time and got it done in three hours. Recommend buying the o-rings for the fuel injectors, and carb cleaner for the throttle body.That pcv by pass tube disintegrated, so i replaced it also. Did the negative battery cable and replaced the purge valve. My 2011 1.4 eco is running great.
This is a fantastic tutorial. Many thanks for creating this video!
I’m doing this this week because my car tripped a p0171 and I can’t pass inspection. After replacing the pcv hose, the blowing out of the pcv valve cover and vacuum sounds began. So I’ll being doing both. This video and the other one are saving me so much money. Thank you!
Great video. Great camera work. Great step by step with torque specs. Very well done. Thank you.
Thank you so much! Just finished replacing my intake on my 2014 cruze and couldn't have done it without this video.
Wow! What a great informative video.
This is the second time I have replaced an intake on a 1.4 engine.
What I found especially helpful was not having to purge the fuel rail. (just set it aside.)
I wish 1a auto had a Canadian site for parts.
Thank you.
Had to do this and the valve cover thank you for such a great video saved a ton of money doing it myself with online parts local parts cost twice as much.
great video. i was able to follow it to replace my own intake. had a few issues that caused me to stress and cuss. pushing in the fuel rail with the new o-rings lubed up didn't go so well until i took a break and then tried wiggling it as i pushed and it went in. by the way if your intake is missing the self tapping screws for the fuel rail. I bought some everbilt hex head self drilling screws #12 x 3/4 in. at home depot. they worked fine. i read there's not much difference between self tapping and self drilling except the self tapping require a pilot hole.
Thank you! Super helpful! I definitely appreciate the torque specs!
Excellent video- so clear and precise. I’m just a girl and I followed this with ease. Just wondering if you know why I got a “service stabilitrak “ message after performing this repair? Wasn’t there before .
You're a hero for this.
+Tim Ehrenfeld Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Just don't be like me and put the throttle back on at the wrong angle. I didn't realize it until everything was back together. Silly me.
Thanks - This is what weekend mechanic needs to get the job done and save some $$
Great video thank you!
Is it possible to remove/ replace the solenoid without removing the intake entirely?
Thank you super helpful!
My power brake vacuum hose snapped at the manifold. was told I need new manifold as well as the hose. I assume the parts here include that connection? I've got the new hose and like the price of aftermarket part. Thanks for the help. even if answer unknown.
Seems like a lot of steps, time consuming & if you miss a step it might be difficult to figure out. I didn’t know how much time is involved with repairing my car. I really appreciate the techs thank you for your video, very good explaining.
Great video
Pretty amazing doing it all wearing those gloves..
Doing this right now for the 1.4l sonic and there is barely any room to pull out and put in the intake. It really feels like something is going to break.
better than other simillar videos
Hi,
Thanks fo a good video.
I have this motor in An opel Astra i have the issue with oil driping in small amount out from the throttel body /air intake pipe. The valve cover is changed so this part is okej and the valve in the hose that goes to the turbo seems to be working proberly when blowing/sucking into it. Could the valve (or missing valve) in the intake manifold be the cause of the oil?
I replaced the intake manifolds on my Buick Encore. I got the Dorman part because it's touted to be improved. I changed the valve cover at the same time, also Dorman. The intake manifold check valve failed immediately, less than 100 miles. Now I have to replace them both again. No Dorman parts for me!
I hear the factory intake manifold goes bad sooner or later b/c of the check valve. Do you know if a 1A auto manifold is used as replacement would that solve the problem with intake manifold check valve? Thanks for the video any feedback appreciated
Thank you!
What is the hose you removed at 2:03?? Mine broke and im trying to get a new one i just dont know the name to it.
Question what went to g to have to change manifold did it crack or worp
Hi, does this manifold fit on the 1.6L A16JET engine?
What is the part name for the Solenoid on the back/bottom side of the intake with the Vacuum connector @ 15:48? I need to order that. Thank you!
My 1.8 has a p0171 code and found out my intake has a small crack in it. They wanted to charge me 2 grand for a new one and labor for a small crack. I went to Lowe’s got some JB weld that bonds to plastic and fixed it right up . But of course this is just a 7.99 temporary fix until I get a new manifold.
Thanks!
Questio ?can you just clean it, or is there a reason why to replace it ?
Where do you get MAP sensor O ring?
Is this for the 1.4 or 1.8 engine ?
My pcv valve is gone. Do I need to replace the entire manifold to fix it?
How long does the entire process take? 1-2 hours?
Took me 3 hours. I'm new at this and have a chevy sonic which has less room to work with under the hood
What was the problem? Why did you have to change it?
What engine is this for? That's vital information
1.4
this dorman aftermarket intake manifold won't fit the 2011
@@LOLONO666 That’s what I have been told. Where do you get one for a 2011?
Did you let the antifreeze out of that car
I've never heard of needing to replace an intake manifold unless damaged in a crash. Why would this manifold fail?
Minute 17:49, What is the name of this part?
Does this apply to 2016 Cruze as well?
+@MM-sq5pf This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
71ft pounds on the throttle body bolts that's crazy, and can't be right
I just need to replace my throttle body gasket, where is it located?
In between the throttle body and the intake manifold. You'll have to remove the throttle body to get to the gasket and torque it back to 71 in lbs which is 6 ft lbs
How moch of torque
I hate alot of clips. I always break one atleast
why didn't you clean up the throttle body? wow.
if your cruze is under 120k or less then 10years old chevy will replace it for free due to issues with the built in pcv valve ^_^
Is this true? Do I call a chevy dealership or the Nissan dealership I bought it from?
Where do I get more info on this? I want to replace mine but don’t want to spend the weekend doing it if I don’t have to. I’m already doing the valve cover replacement