The Gospel is 1 Corinthians 15:1-4 👇 ua-cam.com/video/lbb4xwYj19g/v-deo.html Dispensational Truth, Or God's Plan and Purpose in the Ages Book from Clarence Larkin
Hi Kevin, I saw a video of a guy changing the clutch on a VW Touran. He struggled for 1.5 hours to put the gearbox back into the motor. Was nearly the same engine and the same gearbox. It always looks so easy with you, but I know exactly how difficult it is lying under the car. Fantastic work!!
@@WMCS Hi Kevin, here is the link to the video ua-cam.com/video/Cvnpb2j7QTY/v-deo.html . It's in German but I think you can see his frustration at putting in the gearbox.
Boy you are strong..... When you removed the whole gearbox like a weight lifter you definitely became my hero... Gonna do the job diy later this summer on my tdi. Amazing how You made it SEEM so easy (and it's not) Congrats again on such skills!
@@danieledarugna8981 Not Kev but another mechanic here; no mate, as long as you don't break into the system and do it as Kev does it, no need to bleed it.
@@bigbill74scots Thank you for the support! I got the job done a couple of weeks ago and yes I see what you mean (it was a silly question). Many many thanks
Well done , very well planned , and with good attention to the small details , doing stuff like dropping gear boxs on your own , can be soul destroying when you outside , working with limited space , muck dropping down your neck , getting cold and wet . Keep at it sir , hard work always pays off !
VAG are honestly my favourite cars to work on..,, I’m pretty sure the engineers took into account it’s gonna end up in a workshop for maintenance..,, everything is well laid out.
Great job, I love watching you turn a difficult job into a seemingly easy job. I have seen so many videos that I almost already know the steps to disassemble a clutch hahahahaha. A question. At minute 4.10. Why do you disassemble this part in the VAG group?
Hi Kevin Brilliant work mate Think I need a clutch replacement on caddy 2015 1.6 tdi as getting vibration when I press clutch pedal whilst driving . Where about you based bud ? Kind regards Craig Williams
THank you for the very helpful video, would that have taken 2 to 2.5 hours to that job? I have a Golf that had a really bad clatter in the flywheel, the guy I bought it off had a mechanic look at it and said a new flywheel will fix it. After getting a quote for $2,500 AUD the owner decided to sell the car cheap. The mechanic was half right but it also had a dead injector, after replacing the injector it runs much better but the flywheel is still making some noise and the clutch is not good. The mechanic did not bother to check the DTC's.
This particular repair. With an intermediate experience I’d say it shouldn’t take more than 5 hours to completion.., in my opinion. Thanks for your input on our forum.
Hello! Nice work, congratulations! I would like to ask. Is the flywheel double in this passat? If I saw well the car with manually the gearbox is fitted. I have one too and I can't decide what kind of flywheel to buy ... :( Can you help? Thanks.
On the VAG engines DMF only starts from 1.9 onwards ., I don’t think you’ll need to replace the solid flywheel. In my opinion go for a SACHS or LUK clutch kit.
I’m considering doing a Clutch Replacement myself on a Seat Leon 5F 1.6TDI which has the same block/gearbox. Can I ask how much the gearbox assembly weighs, before I give this a go? I am a little concerned some places suggest gearboxes can weigh in the region of 100KG, however being a 5-speed manual I’m hoping it’s closer to 50-60KG... If someone who has attempted this on a VAG 1.6TDI can please put my mind at rest Id really appreciate it 😊
Daniel.., Gearboxes are generally heavy lumps ... your vehicle’s one should be about 60KG... it’s always good to have an extra pair of hands for safety.
Thanks for getting back to me so quickly, and thank you for the excellent video. Will deffo be giving this a go! Kevin Albert-Williams you are the man!
Is there a dual mass flywheel on these engines? Is it better to change with clutch? I have an octavia that it difficult to get into gear and the bite is high on the pedal, but the pedal feels good. I think its just the clutch.
Do you rate single mass flywheel conversation on passat estate 1.9tdi.or should i go dual mass the car is only a school run car now.and which make do you recommend,thanks in advance lee👍
Hi Lee.., I wouldn’t really rate it. For an extra £100 you can probably get the DMF with the proper kit. You will lose the buffer between engine torque and gearbox .,, quite juddery .after that conversion.
Hello mate, i know that i'm commenting on quite old video so i know you might not reply but aproximatly how long should this job take for decent mechanic? Based on this video i would say that it should be done in 2 hours max. Thanks in advanced.
Impressive one man job. Would it be any easier on 2015 B8 Passat 1.6 tdi? Got the clutch already replaced @ 63 K miles, but on warm engine rattle can heard which goes away when clutch pedal is pressed. I was told it has single mass flywheel so rattle may be from gearbox "neutral gear rollover", or maybe release bearing? Rattle heard here: ua-cam.com/video/cc3KjfkH0A0/v-deo.html
Definitely the gearbox from that noise. It’s the main shaft bearing. It can be done in situ without dropping the box. All you’ll need is a bearing puller. At the back end of the box there is a big rubber cap. Pop that off and it’s that bearing at the end. Hope that helps.
@@WMCS Thanks, might need to contact you for this job (input or output shaft bearing). It's a MQ250 PGH gearbox, looks like it has a casting cover instead of rubber cap. I guess oil must be drained and replaced as well?
I totally respect this guy's balls to carry out all this work outside !!
Never seen anyone pop a box in and out with such consummate ease,,,,,, like a walk in the park for him,,,, excellent worker
A top mechanic and a person with a positive attitude, good bless you
The Gospel is 1 Corinthians 15:1-4
👇
ua-cam.com/video/lbb4xwYj19g/v-deo.html
Dispensational Truth, Or God's Plan and Purpose in the Ages
Book from Clarence Larkin
Hi Kevin, I saw a video of a guy changing the clutch on a VW Touran. He struggled for 1.5 hours to put the gearbox back into the motor. Was nearly the same engine and the same gearbox. It always looks so easy with you, but I know exactly how difficult it is lying under the car. Fantastic work!!
That’s interesting., would be nice to see have you got the link.
@@WMCS Hi Kevin, here is the link to the video ua-cam.com/video/Cvnpb2j7QTY/v-deo.html . It's in German but I think you can see his frustration at putting in the gearbox.
Boy you are strong..... When you removed the whole gearbox like a weight lifter you definitely became my hero... Gonna do the job diy later this summer on my tdi. Amazing how You made it SEEM so easy (and it's not) Congrats again on such skills!
DANIELE DARUGNA
Thanks pal. As far as repair goes all VAG engine are fairly low level skills. If there’s any advice you need just drop us a message.
Kevin, by removing the slave cylinder as you did, will you have to bleed the system all the same?
@@danieledarugna8981 Not Kev but another mechanic here; no mate, as long as you don't break into the system and do it as Kev does it, no need to bleed it.
@@bigbill74scots Thank you for the support! I got the job done a couple of weeks ago and yes I see what you mean (it was a silly question). Many many thanks
@@danieledarugna8981 No such thing as a silly question bud, we've all been there and helping each other is what it's all about😁👍👍
Earned every penny. That is HARD WORK
Awesome guidance throughout, efficient and effortless. Thank you so much for making it. Myself and my son were able to do this with no problems.
Thanks for sharing on our forum.
Well done , very well planned , and with good attention to the small details , doing stuff like dropping gear boxs on your own , can be soul destroying when you outside , working with limited space , muck dropping down your neck , getting cold and wet . Keep at it sir , hard work always pays off !
Hi. You're super, man, and I'm a mechanic and I'm always watching you, you're doing a great job, especially on the spot. Spore to the job, respect
Daniel thanks a lot for the support. It means a lot coming from another mechanic
There are a lot of parts to be taken out, I guess it's the most complicated car in your job. You did it very well.
It’s not that bad. They’re actually my favourite car to work on .., VAG engines.
What’s popular on your side of the world.
I'm interested to your tool that used for centering the clutch, what is it called? Where & how can I get it?
Wow I'm very impressed mate working underneath laying down is hard and doing a clutch alone deserves respect keep up the good work
Rashad Hussain thanks for the feedback... appreciated
Wow 😮😮good work you make it look easy, that milwaukee Fuel looks like its worth it's weight in gold, great video great work man👍👍
Brilliant mate, I'm going to make the apprentice watch this as a training video.
صباح النور والنشاط صباح الأمل والإصلاح صباح الخير براهيم
Great video,I done lots on cars in the past and this gives me the confidence to just go for it.Thanks.
Well done Sir great to be young and strong,and also have the can do attitude to get the job done.you have my respect
Thanks Colin.,, I do feel blessed that I can do this onsite ...
You're a 🌟, keep up the good work! Thimb
Could do these clutch’s all day long mate there a nice job
VAG are honestly my favourite cars to work on..,, I’m pretty sure the engineers took into account it’s gonna end up in a workshop for maintenance..,, everything is well laid out.
Kevin-Albert Williams you know that mate 👍🏻
Great job, I love watching you turn a difficult job into a seemingly easy job.
I have seen so many videos that I almost already know the steps to disassemble a clutch hahahahaha.
A question. At minute 4.10. Why do you disassemble this part in the VAG group?
that part will catch on the engine body as you try to slide the gearbox out so needs removed.
Thanks for sharing
good job👍
Top job sir 👍
Great tutorial video as usual just one question did the clutch cylinder needed bleeding? and was the flywheel replaced? Thank you
Good video and very useful 10/10. Before releasing the gearbox
selectors, do you lock the gear lever inside the vehicle? Thank you.
Nothing to lock. It’s all mounted on fixed points.
Respect 🙋💪🍻 thank tout sir
Beuti work nice man keep it up and make some more video make one Toyota avensis d4d 2012 plate 2.0l please mate thank you nice one
shaff no no probs will keep that in mind ...weather been a bit shaky in the past week. Hopefully next week I’ll be back on two vids a week.
@@WMCS you are the man bless you mate working in this weather make nice video d4d Toyota avensis 12 plate 2.0l thanks
How do i find out if my car is dual mass or not , i have the same car as this but when i search for clutch kits it gives me both options ?
Hi Kevin
Brilliant work mate
Think I need a clutch replacement on caddy 2015 1.6 tdi as getting vibration when I press clutch pedal whilst driving . Where about you based bud ?
Kind regards
Craig Williams
www.williamsmobileclutch.co.uk
Thankyou brother. Is this the same as the 1.6tdi golf from 2014 ?
THank you for the very helpful video, would that have taken 2 to 2.5 hours to that job? I have a Golf that had a really bad clatter in the flywheel, the guy I bought it off had a mechanic look at it and said a new flywheel will fix it. After getting a quote for $2,500 AUD the owner decided to sell the car cheap. The mechanic was half right but it also had a dead injector, after replacing the injector it runs much better but the flywheel is still making some noise and the clutch is not good. The mechanic did not bother to check the DTC's.
This particular repair.
With an intermediate experience I’d say it shouldn’t take more than 5 hours to completion.., in my opinion.
Thanks for your input on our forum.
Great video.
how long does this take mate approx? did it include flywheel also?
respect !
Impressive work Kev. It would take me a day and a half. I'll bet you could do these blindfolded.
I've a Golf TDI 1.6. Same as this Passat?
Best wishes
Yep
Hello! Nice work, congratulations! I would like to ask. Is the flywheel double in this passat? If I saw well the car with manually the gearbox is fitted. I have one too and I can't decide what kind of flywheel to buy ... :( Can you help? Thanks.
On the VAG engines DMF only starts from 1.9 onwards ., I don’t think you’ll need to replace the solid flywheel.
In my opinion go for a SACHS or LUK clutch kit.
I think if you used a cordless/ electric Milwaukee ratchet, you could save another 45 seconds on this job!!! Joking aside, respect!!!😃😃
🍻.. that’s it. The quicker the bolt spins the better.
I’m considering doing a Clutch Replacement myself on a Seat Leon 5F 1.6TDI which has the same block/gearbox. Can I ask how much the gearbox assembly weighs, before I give this a go?
I am a little concerned some places suggest gearboxes can weigh in the region of 100KG, however being a 5-speed manual I’m hoping it’s closer to 50-60KG...
If someone who has attempted this on a VAG 1.6TDI can please put my mind at rest Id really appreciate it 😊
Daniel.., Gearboxes are generally heavy lumps ... your vehicle’s one should be about 60KG... it’s always good to have an extra pair of hands for safety.
Thanks for getting back to me so quickly, and thank you for the excellent video. Will deffo be giving this a go! Kevin Albert-Williams you are the man!
Is there a dual mass flywheel on these engines? Is it better to change with clutch? I have an octavia that it difficult to get into gear and the bite is high on the pedal, but the pedal feels good. I think its just the clutch.
steel man
Do you rate single mass flywheel conversation on passat estate 1.9tdi.or should i go dual mass the car is only a school run car now.and which make do you recommend,thanks in advance lee👍
Hi Lee..,
I wouldn’t really rate it. For an extra £100 you can probably get the DMF with the proper kit.
You will lose the buffer between engine torque and gearbox .,, quite juddery .after that conversion.
Kevin-Albert Williams thanks for reply mate do you use local supplier or an online one if its online can you put me in right direction.
I only use Euro car parts. They have good quality parts
💪
Hello mate, i know that i'm commenting on quite old video so i know you might not reply but aproximatly how long should this job take for decent mechanic? Based on this video i would say that it should be done in 2 hours max. Thanks in advanced.
Give yourself about 4 hrs. To include setting up and organising tools.
Hi bro
Y you remove complete drive shaft right side one from the gear box
Thanxs
And an other one thing !!!!
is there any need to lock the gear linkage adjusment from inside and outside the car
Thanxs
How can I get in touch with you? Need a clutch replacement
👍👍
hello nice video has how many km to replace the flywheel and clutch the passat 1600tdi?
On average about 100k miles
@@WMCS ok 👌 grazie
How long did it take you ? Subed. Great work.
Thanks Stephen. This one repair about 4 hrs.
Excellent video! Is it the same on a vw Golf 1.6 tdi?
BoostHit yes exactly the same.
@@WMCS Thanks for the reply. What do you charge for fitting a new clutch into one of these?
BoostHit it’ll be £230 labour to include oil and gearbox service plus parts.
@@WMCS 230£ for labour and oil. Ok, very reasonable price. Almost cheep.
BoostHit thanks mate. ... I try and keep it reasonable... there’s no need for overpricing things.
4:29 why you unscrew this joint?
Did you change the dual mass?
.
Its the same for b8 variant ?
Yes it’s exactly the same.
Hi bro
I have skoda rapid 1.6 tdi
For cluth replace should i remove subframe
Thanxs
TAXI MAN
It’s exactly like this one. Fairly easy and straight forward. No subframe removal required.
@@WMCS
Do you have video for that means skoda rapid
Thanxs
TAXI MAN
That Passat 1.6 you are looking at on the channel. Is exactly the same as the Skoda rapid. Just a different name.
@@WMCS
Ok thanks alot man :)
Is this the same as a 2013 Skoda Octavia 2.0 TDI?
Yes
same procedure for 1.2 tdi?
All modern vag gearboxes are very similar to remove
37 minutes. the dealer asks to leave the car for the summer.
👍👍👍🍻🍻🍻
Impressive one man job. Would it be any easier on 2015 B8 Passat 1.6 tdi? Got the clutch already replaced @ 63 K miles, but on warm engine rattle can heard which goes away when clutch pedal is pressed. I was told it has single mass flywheel so rattle may be from gearbox "neutral gear rollover", or maybe release bearing? Rattle heard here: ua-cam.com/video/cc3KjfkH0A0/v-deo.html
Definitely the gearbox from that noise.
It’s the main shaft bearing. It can be done in situ without dropping the box.
All you’ll need is a bearing puller.
At the back end of the box there is a big rubber cap. Pop that off and it’s that bearing at the end. Hope that helps.
@@WMCS Thanks, might need to contact you for this job (input or output shaft bearing). It's a MQ250 PGH gearbox, looks like it has a casting cover instead of rubber cap. I guess oil must be drained and replaced as well?
dual mass flywhel ???or single mass ??
On my 2010 1.6 it's dual. I'm now about to replace it and install single mass.
@@Johannore how did it go? Was the single mass any good?
@@dannyhymus7387 yes it was good. I only kept the car for a few months though, so I don't know about the duration of it.