God bless you hope you had a great Easter weekend. Stay calm and relaxed while working and everything will fall into place. That’s how I work but the trying times can always stress you out lol!
Thanks for doing these videos. After watching you work it inspired me to change the clutch on my Audi S3 8V. It took a while but it was worth it. Look after yourself.
Thank you Kevin for this weeks lineup of clutch replacements. Tickled my spine a lot when that jack started to go down a bit. Seems like you have had bad luck regarding these jacks latly. I hope the weather gets a LT better next week, rain really gets in everywhere no matter what clothes used. Wish I could have hold a tarp over your workarea when you did that transporter. Hope you and your family had the best easter possible. Regards from Sweden.
@@WMCS Had som older jacks that worked great, changed to Bacho and had issues from start with them not holding pressure. Had to open the valve and pump a few times to release air from the hydraulic. Found out after a while that the factory didnt fill the cylinder enough. Opend the fillport and filled them up with hydraulic fluid and they worked fine after that. Perhaps same issue for you?
Salut Kévin, Que dire de plus à ton travail car c'est juste parfait juste au moindre détail et comme je te l'avait déjà dit même si je suis mécanicien tout comme toi c'est toujours un régal de voir le travail que tu fait encore force à toi mon frérot
G’day Kevin greetings from Tasmanian Australia 🇦🇺. It’s great to see you again for some reason I thought that you weren’t on UA-cam., I was scrolling around and found your channel. I have subscribed I used to get enjoyment watching you putting in these clutches ect, anyway good to see you again kind regards John
One of the thing I don't like when repairing my car is when it is raining and my tools got wet. I hate it. if it is summer is another story but sometimes u can get sick from bad weather.
I've noticed that over the last few weeks you seem to be getting more of the little 3cyl Toyotas, Citroëns Peugeots etc? coming in, is this because they are becoming popular with learner drivers who are not as kind on the clutches as more experienced drivers ?
I'm on a Bahco one at moment..been ok ..lots of use on even rocky terrain and so far so good ..Had a blackhawk one that done 20 years in the UK...then a few just junk that would be scrap after a year or so..
Hi What if the axle shaft rubber is broken, do you go to the store and replace it, or is there a job left for the owner? I'm asking because I think the rubber is often broken.
Important not to get distracted or deviate from purpose. In this instance I’m contracted to do one thing and one thing alone. That is to replace a clutch.
Full send bro 😏 🤙never lift mobbin deep 🙌 happy Easter to you and your family if you celebrate ty for the video also bro editing do you like edit a video same day you finish the job seems like a lot of editing 😮
Hi Kevin das macht richtig spass zusehen wie du so schnell das zerlegst und wieder zusammen baust jeder griff sitzt echt tolle Arbeit 😂😂 ich denke kein andere ist si schnell wie du .wie lange brauchst du zeit pro Auto? Vieleicht bei nächster video zeigst du uns die zeit wann du startest und wann du fertig bist 💪💪💪
Hello, I have a problem with my old Seat Leon 1.9 TDI. I replaced the clutch. Shifting and pedal feel are perfect. But when I press the accelerator fully, the clutch slips. Has this ever happened to you? What can be done about it? Thanks for your response.
Hey here's an idea. You might be doing this already.sell your videos as training videos as visual learning aids for people to have a step by step guide do the D.I.Y person.just a thought you half to edit anyway
This is insane! The amount of crap you have to remove before getting to the clutch! Remind me to never buy a Citroen. Update: I only just realised this is a Toyota! Which is potentially the only brand I was willing to buy :(
Jeez, brother, I hope this job pays you plenty... As if doing this without a proper lifting equipment, laying on your back, is not enough, you are doing it outside, in bad weather and while FILMING IT at the same time from different angles. To me, this should pay at very least $300/hour. And even then I won't be doing it at my age, I just wouldn't last long in that kind of hell 😞 With all the respect and admiration for your work, I would nevertheless suggest moving towards a proper repair shop. With all the following from YT and some diversification of your services it should not be a problem. I've done some mobile work myself in the past, and I will never go back to it. It will never be financially viable on these depreciating low-cost assets (which cars really are) if charged commensurate with your effort. If the economy in your location makes it unprofitable to run an automotive repair shop, you might consider moving elsewhere (or changing an occupation). I am not criticizing you in any way, you are an amazing, hard-working, productive man. Only it breaks my heart to see someone working THAT hard. Unless you are a millionaire by now.
www.williamsmobileclutch.co.uk 🇬🇧
Submit Enquiry For A Clutch Quotation.
0:09 2013 Citroen Dispatch En-Rise HDI 2.0L Diesel.
41:30 2011 Citroen Berlingo XTR HDI 91 1.6L Diesel.
1:24:52 2010 Toyota IQ2 VVT-I 1.0L Petrol.
2:05:13 2011 VW Transporter T-5.1 (T32) TDI 2.0L Diesel.
2:43:52 2010 Toyota IQ2 VVT-I 1.0L Petrol.
This man work better on streets than mechanics in garage respect 👏👍
Incredible skill, amazing how quickly you can replace a clutch pack in such a tight space.
And love the Gorka pants!
Happy easter!
Thankyou. Happy Easter🍻🍻🍻🍻
God bless you hope you had a great Easter weekend. Stay calm and relaxed while working and everything will fall into place. That’s how I work but the trying times can always stress you out lol!
Happy Easter to u Kevin and family 🙏 😊 🛠
Thanks a Lee. Happy Easter 🐣 🍻🍻🍻
Thanks for doing these videos. After watching you work it inspired me to change the clutch on my Audi S3 8V. It took a while but it was worth it. Look after yourself.
Excellent. Glad to hear it helped inspire you to get motivated
😊
😊😊😊😊😊😊😊@@WMCS
Svaka cast duze ja mislim da si ti jedini koji ovo radi velika i iskrena podrska od ❤
Kevin, Happy Easter to you and your family, and a big thumbs up from me buddy.👍
Thank you Mike .. happy Easter 🐣 🍻🍻🍻🍻
Thank you Kevin for this weeks lineup of clutch replacements. Tickled my spine a lot when that jack started to go down a bit. Seems like you have had bad luck regarding these jacks latly. I hope the weather gets a LT better next week, rain really gets in everywhere no matter what clothes used. Wish I could have hold a tarp over your workarea when you did that transporter.
Hope you and your family had the best easter possible.
Regards from Sweden.
It’s the third one now in a month. Not sure what’s wrong with SEALEY Jacks. They used to be really good.
@@WMCS Had som older jacks that worked great, changed to Bacho and had issues from start with them not holding pressure. Had to open the valve and pump a few times to release air from the hydraulic. Found out after a while that the factory didnt fill the cylinder enough. Opend the fillport and filled them up with hydraulic fluid and they worked fine after that. Perhaps same issue for you?
Salut Kévin,
Que dire de plus à ton travail car c'est juste parfait juste au moindre détail et comme je te l'avait déjà dit même si je suis mécanicien tout comme toi c'est toujours un régal de voir le travail que tu fait encore force à toi mon frérot
Saludos bendiciones excelente semana y muchas bendiciones en esta semana recordando el sacrificio de Jesús el salvador 👍🙏
Thank you for the spiritual blessings..
Amen 🙏🏽. Now we drink 🍻🍻🍻🍻
Another good work week🦾 Have a great weekend and Happy Easter, Kevin! Best regards, Vlad.
Thanks Vlad.. really value your feedback. Happy Easter 🐣 🍻🍻🍻🍻
G’day Kevin greetings from Tasmanian Australia 🇦🇺. It’s great to see you again for some reason I thought that you weren’t on UA-cam., I was scrolling around and found your channel. I have subscribed I used to get enjoyment watching you putting in these clutches ect, anyway good to see you again kind regards John
Thanks for subscribing to the channel. Really appreciate it… hope the content still make for a good watch. 🍻🍻
One of the thing I don't like when repairing my car is when it is raining and my tools got wet. I hate it. if it is summer is another story but sometimes u can get sick from bad weather.
Happy Easter kevn you doing a good job hard work in it mate keep going 👍
Thank you 🍻🍻🍻
Happy Easter Kevin hope you have a well deserved rest as usual always appreciate your upload have a great weekend 👍
Thank you. Happy Easter 🐣 🍻🍻🍻🍻
Très bon travail. Bon week-end de pâques depuis la France
Merci 🍻🍻🍻🍻
Comme d’habitude bravo un vrai travail de professionnel
CHAPEAU MASTER!!!!!!!!!!!!!!!, excellent your videos. SALUDOS!!!!!!!!!!!!!!!!!!!
Merci beaucoup et salut.
Inspired by Kevin, I changed the clutch on my Peugeot 206 by myself, it only took two days and a week of recovery for me.
Happy Easter 🐰
That’s great to know .. the main thing is you did it .. 🍻🍻🍻
Great job as always, Have a great Easter Kev.
Happy Easter 🐣 🍻🍻🍻🍻
Happy Easter from Czech Republic🐣
Happy Easter 🐣 🍻🍻🍻🍻
Saludos bendiciones excelente semana y éxitos en el restó de la semana 🚘🚙🚙🚙
1:26 I wish I could see a clutch replacement on a Subaru like this ...😀
Hey, love the content. Just curious, but I’ve always wondered why the red rubber grease over other options? Cheers!
Excellent video 👍. Would you do clutch issues on Ford Transit MK 8’s ?
Toujours Génial ! From France! I like your orange tools (Milwaukee?) very strong! Happy Easter
🇫🇷 Merci beaucoup .. bonne weekend.
🍻🍻🍻🍻
Thank you
Top notch kev,happy easter bud😊😊
Thanks 🐣🍻🍻🍻🍻happy Easter
aparentemente não tinha defeito na embreagem, o problema estava no cilindro auxiliar de embreagem que estourou, 20 minutos resolvia
100k well done Kevin 👍👍👍
Thank you.
I've noticed that over the last few weeks you seem to be getting more of the little 3cyl Toyotas, Citroëns Peugeots etc? coming in, is this because they are becoming popular with learner drivers who are not as kind on the clutches as more experienced drivers ?
I’ve got more next week… things comes in pattern in life. It’s important to understand the pattern and catch it. I kinda look for them little nuggets.
Very professional Kevin!
Thank you.
wow 3 hour, great work sir as always and is that a new trolley jack?
have a good rest over the holiday....
Another replacement one. Third one from Sealey. Both previous ones failed.
I'm on a Bahco one at moment..been ok ..lots of use on even rocky terrain and so far so good ..Had a blackhawk one that done 20 years in the UK...then a few just junk that would be scrap after a year or so..
Hi Kevin, a tarp over the front of the vehicle wouldn't help you at least with the leaks on rainy days. happy Easter everyone...
I’ve been thinking more and more about something practical just to take the edge off a bit
You can get some decent pop up gazebos now
Come to France to repair my car 🥲
Thank you for the vote of confidence 🍻🍻🍻
Vous êtes d’où? Je peux vous aider peut être 🙂👌
Hi
What if the axle shaft rubber is broken, do you go to the store and replace it, or is there a job left for the owner? I'm asking because I think the rubber is often broken.
Important not to get distracted or deviate from purpose.
In this instance I’m contracted to do one thing and one thing alone. That is to replace a clutch.
@@WMCS Does that mean if I pay you to replace my clutch you're not going to do my laundry and cook my evening meal for me? 😆
Full send bro 😏 🤙never lift mobbin deep 🙌 happy Easter to you and your family if you celebrate ty for the video also bro editing do you like edit a video same day you finish the job seems like a lot of editing 😮
Definitely a lot of editing.. I do it same day that’s correct ☑️
Lots of effort 🍻🍻🍻🐣
@@WMCS In Italia sarebbe un sogno avere un professionista del tuo livello,che viene a sostituire la frizione a casa!Veramente grandi complimenti....
Good job 👍
You are amazing!!
for the jack, did u use hole 4 and later hole 3 for the second jack?
Hi Kevin das macht richtig spass zusehen wie du so schnell das zerlegst und wieder zusammen baust jeder griff sitzt echt tolle Arbeit 😂😂 ich denke kein andere ist si schnell wie du .wie lange brauchst du zeit pro Auto? Vieleicht bei nächster video zeigst du uns die zeit wann du startest und wann du fertig bist 💪💪💪
I think that’s a great suggestion.
I will take that in board and start putting up actual repair time.
Thanks for the feedback
Hello, I have a problem with my old Seat Leon 1.9 TDI. I replaced the clutch. Shifting and pedal feel are perfect. But when I press the accelerator fully, the clutch slips. Has this ever happened to you? What can be done about it? Thanks for your response.
Maybe quality of parts ..?
@@WMCS It's from the brand SACHS. I thought it was a quality manufacturer.
good efforts
👌
THANK You 😉
Good❤
WOw KEV you got new hydraulic jack!
Can i have the old one ? :P (Wiking )
Great job. How much for a job like this one
👍
Do you use red rubber grease? Castrol?
Yes that’s correct
Good work sir ❤. mumbai
🇮🇳 🍻🍻🍻
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Hola.la.pistola.q.utilisas.muy.guena.cuantos.dolares.bale
👏👏👏
Hey here's an idea. You might be doing this already.sell your videos as training videos as visual learning aids for people to have a step by step guide do the D.I.Y person.just a thought you half to edit anyway
new jack
Every week .. that’s Sealey for me
goodjop
@ 1:52.12 I got worried for you mate
🙋♂️🙋♂️🙋♂️🙋♂️
no pubs ...perfect
pas bol avec cette flotte les outils en prenne un coup avec cette pluie !!!
I know .. at one point I was thinking it’s better if I sail to work rather than drive 😁🍻🍻
@@WMCS je me doute travaillier sous pluie chiant !!
merkezi hava tahliyesinden doldursan daha iyi olur
Ok
FASTER DADDY, FASTER
❤❤❤🎉🙏🙏🙏👍🏿👍🏿👍🏿🍻
Thanks for tuning in. I’m noticing you weekly. 🍻🍻🍻
ngglogok njaran
This is insane! The amount of crap you have to remove before getting to the clutch! Remind me to never buy a Citroen.
Update: I only just realised this is a Toyota! Which is potentially the only brand I was willing to buy :(
Always the little caress on the clutch before putting the gearbox back in 😁🦾
That’s it … a good sending off into the big world of motorways and country roads
🫡👍🇸🇪❤️
Jeez, brother, I hope this job pays you plenty... As if doing this without a proper lifting equipment, laying on your back, is not enough, you are doing it outside, in bad weather and while FILMING IT at the same time from different angles. To me, this should pay at very least $300/hour. And even then I won't be doing it at my age, I just wouldn't last long in that kind of hell 😞
With all the respect and admiration for your work, I would nevertheless suggest moving towards a proper repair shop. With all the following from YT and some diversification of your services it should not be a problem. I've done some mobile work myself in the past, and I will never go back to it. It will never be financially viable on these depreciating low-cost assets (which cars really are) if charged commensurate with your effort. If the economy in your location makes it unprofitable to run an automotive repair shop, you might consider moving elsewhere (or changing an occupation).
I am not criticizing you in any way, you are an amazing, hard-working, productive man. Only it breaks my heart to see someone working THAT hard. Unless you are a millionaire by now.
Judging by this message I’d say you’re in America 😁😆🍻🍻..
Man on this side of the pond are still worthy of the title 😉
za4et
Thank you.