Key Won't Turn. 2007 Saturn Vue Ignition Lock Cylinder Switch Assembly
Вставка
- Опубліковано 14 лип 2017
- In this video I show how to replaced a ignition cylinder switch ASSEMBLY, not the cylinder switch. I wasn't able to take the cylinder switch. The Ignition lock cylinder switch I used from a 2003 Saturn Vue. This car is a 2007 Saturn Vue. It work with no problems. I'm not sure (do your research) but I believed the ignition swictch are the same from 2002-2007 on a Saturn Vue.
Use safety. Especially safety glasses. Thank you for watching.
Donation:
paypal.me/Nonemechanic101 🎁 - Авто та транспорт
Great Video ! Now I feel better about some of the "methods" I've used to work on these things.
You're Welcome👍
that junkyard that wanted you to buy the whole steering column is a joke , good thing you found the part online
Ye, i don't go to that junkyard anymore.
@@NoneMechanic101 my
@@terryblanton2140 ?
thanks g, i mean i figured it’d be this easy but i still needed something to make sure
You're Welcome
If you have any Saturn and the key won’t turn, first look at the key and see if it looks worn. If you have a spare key that is not worn see if that has the same problem. I’ve had 2 Saturns (wagon and vue) that had this problem. Starts out where you can jiggle the key a little and get it to start but gets worse over time. Thought it was a cylinder problem and an expensive fix until I noticed how worn the key was.
Great information. Thank you
The little black plastic piece under the ignition will release the lock and key. But your video was helpful for a 10 min fix. Also that was the problem and its works fine without it. Another problem was the key was worn out and the second key had to be used and just needed to make a copy.
I'm glad you was able to fixed yours.
Which plastic piece? Please let me know
@@missbibi209 The plastic piece next to the locking mechanism
@@dominictrotter7211 ty. I never figured it out. Ima junk my car this week. They are offering me 200 dollars. Breaks my heart to be carless.
That is the Lil wires ( the yellow one you stated was already cut)
Thank you
Insert the key into the ignition. ...
Turn the key gently. ...
Apply pressure to the steering wheel. ...
Do not shake or rock the wheel. ...
Pull the key out slightly before turning it. ...
Turn the wheel and the key at once to unlock it.
Thank you for this information. I appreciate it.🛠
Black actuator on the bottom is the shift lock, when you pull the trigger on the gear shifter it pulls that pin so if the key is not turned you cannot shift.
The issue I had with my vehicle was the ignition barrel would not even take the key, the pins locked down and you couldn't insert the key more than a quarter inch.
This video is the closest match to the issue I had and was curious if anyone had a similar issue and solution.
Did you got to fix the problem?
@@NoneMechanic101 I drilled out the tumblers and pins with a 1/2" bit and was finally able to turn the barrel freely with a pair of pliers. I tried pushing the holding pin and pulling the barrel out but it is catching on the way out.
I plan to take off the ignition assembly this weekend and try it. From what you showed, it looks easier than fighting it in a confined space.
@@inductiveash6290 Let me know how it goes
@@NoneMechanic101 Took the ignition keeper off and was about to work on getting the barrel out a lot easier. I managed to change out just the barrel and put it back in. All good now, just have an extra key on the keychain now.
@@inductiveash6290 Great
Just saw your video did you know there’s a little hole in the back on the right side... I just replaced my cylinder for the ignition and I was able to remove it at first it was kinda hard but all you need is patience, I bought the new cylinder at Oriely’s I even code it it my self was not hard at all Can I ask why you replaced it in the first place ?? I was having problems with the passlock it wouldn’t start and i had to wait 10 minutes did you experience the same thing?? Thanks and good job why pay a mechanic big money when we can do it ourselves is my motto. 👍 thank god for you tube
Yes, thank God for UA-cam. The key didn't want to turn. Good job
So the problem why the key gets stuck is because the cylinder or the assembly? I have the same car and my kid is getting really hard to take out and I have a hard time turning it all the way off to lock. Please reply and what the solution was/ the problem and if it’s the same as mine. Thank you! Good work.
It was the the ignition switch
Did u fix it? I have the same car (plus a bunch of diff issues) but has a week locking every time. Takes even two hours of trying each time
Samething happened to mine last night I got stuck. I called a locksmith and it cost me $275 for a new key with no chip. However it did start. My key was wore down but my ignition switch needs replaced.
Wow that’s a lot of money
I wonder if the yellow wire bypass the smart key
Not sure
Those are for Passlock Sensor - its basically a resistive network to send previously learned voltage to BCM when key is turned to START.
Thank you
I bought one on eBay came with the key and the car start and die, and there is a lock light on. Do I have to program the key?
The security lock is on. If you have the owners manual follow the instruction. If not call a lock smith and see what he says
ua-cam.com/video/9nGbjHusHvw/v-deo.html
NoneMechanic101 , so you did program the key for the Saturn, thanks for getting back
No, I didn't program the Saturn key. It never turn off. I program my Ford Focus
NoneMechanic101 , so the eBay when start the Saturn up no problem?
You’re suppose to turn the wheel to the right and unlock the steering wheel so the key will turn at the same time. Sometimes the steering wheel will not unlock no matter how much you turn it. Then what?
This was my first time doing this type of job.
That thing on the bottom
you didn't know what it is ....it's for letting it into gear after the key is turned
Thank you
Did you find out what was going on with the wires i have same problem but my wire harness is broken
I just connected everything the way it was amd it worked out
Just ordered that piece on ebay thanks for the video very helpful im thinking thats from the past owner trying to hotwire it could be wrong though
@@Eternal8rain Let me know how it goes
Well repaired on assembly went well then i wanted to fix wires this is where it got a little ugly so the yellow wire goes to the passlock security its was connected to the red wire with a resister to disarm the passlock so i had to do the 30 minute key relearn process thank god that went well but i learned alot so im happy with how it went
@@Eternal8rain Great Job!