MODIFIED MK8 Fiesta ST - ONE YEAR Ownership Review (+ Dyno Run!) 🚗 💨
Вставка
- Опубліковано 28 сер 2024
- I really hope you enjoyed this one! I don't think I've had quite so many mishaps in one video before... Anyway, if you'd like to get yourself down to the Tuning Society for a dyno run, their facebook page is below:
/ rabbidtuning
Here is my first Dyno run, for those of you interested:
• MK8 Ford Fiesta ST (Wi...
*************************
FACEBOOK: / jbctr
TWITTER: / ctrjonny
INSTAGRAM: / jb.ctr
*************************
MODIFICATIONS MADE TO MY MK8 FIESTA ST:
LED Fog Light Upgrade: • How to Install the CEU...
Milltek GPF Back Exhaust: • MK8 Ford Fiesta ST - H...
NextBase Dash Cam: • MK8 Ford Fiesta ST - H...
C:Performance Induction Kit: • MK8 Ford Fiesta ST - C...
ST Suspension Lowering Springs: • MK8 Fiesta ST - How To...
REVO Software: • Revo Stage 1 MK8 Ford ...
Security Upgrades: • 8 Ways to Secure Your ...
Wireless Charging Pad: • MK8 Fiesta ⚡️ Wireless...
Powerflex Torque Mount: • MK8 Fiesta ST - PowerF...
Brake Upgrade: • MK8 Fiesta ST - HOW TO...
Spacer Install: • HOW TO Install Spacers...
Splitter and Skirts: • MK8 Fiesta - Splitters...
Wrapped Wheels: • How to VINYL WRAP your...
RallyFlapz Install: • MK8 Fiesta ST - HOW TO...
Pro Alloy Cooler: • MK8 Fiesta ST - How to...
*************************
MY EQUIPMENT:
Sony A6300: amzn.to/2r2fzLk
35mm Sony Lens: amzn.to/2vItxHP
Zoom H1n Sound Recorder: amzn.to/2LfdubG
GoPro Hero 5: amzn.to/2zYQloy
GoPro Suction Mounts: amzn.to/2Li5eru
DJI Osmo Mobile 2: click.dji.com/A...
DJI Mavic Pro: click.dji.com/A....
(The links above are affiliate links to DJI and Amazon. If you purchase a product after clicking one of my links, I will receive a small commission which goes towards running the channel and creating more content for you to enjoy! This is of course at no additional cost to you. Thank you!)
*************************
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Cheers for watching! Hopefully this provides a little insight in to the long term ownership of one of these cars - particularly one that has been modified. Let me know if there’s anything else you’d like to see 😎
please see next post,thanks.
JB CTR was the dyno at basingstoke?
channelDiVeRsE Sure is!
@@JBCTRhow much cost all in has the upgrades set you back?
Two mods that often *DECREASE* POWER, not increase it.
1) Induction kit. You're removing a cold air feed and replacing it with an engine bay warm air feed. The amount of air being taken into your engine is controlled by the ECU and turbo. If the ECU asks for 1.5BAR of turbo that's what you get, and that equates to a certain amount of air. It doesn't matter how big your intake is, you're not getting any more air into the engine. So you'll make more power if you have cold air instead. There's a reason why manufacturers use an airbox to keep warm engine air out and feed it from outside..
2) Larger intercooler doesn't really add any power. It's useful if you're working the car hard and you can slowdown heatsoak, such as tracking the car. But when everything is cold it can decrease performance, cause a pressure drop and add turbo lag. Lots of info online about fitting larger intercoolers reducing performance and turbo efficiency.
On the Fiesta ST neither the intake or exhaust are restrictive for performance. Change them for the sound and aesthetics. Remap on a standard car, and same remap on a car with every bolt on tuning accessory available will produce basically the same power.
Weird that the reviewer doesn't respond to your message.
You are absolutely right.
You can change the intake with mountune One, which is also a cold air intake.
I have seen tests, and some can give 5 to 8bh more, but for performance, you better stick with the original. It protects the engine better from dirt and fine dust.
If you are going with a bigger intercooler, you might as well get a bigger turbo. Otherwise, it's just BS for a daily car.
Or you live in Dubai, where it's hot all the time, but not in England 🤣.
You made it look cooler than stock for sure. Nice subtle mods 👍
just do nothing Cheers 👌🏼
One of the most beautiful FST I’ve seen on UA-cam 😍 Great job 👍
72Ni Thanks mate :D
My mk8 st just had his first birth day last month! It's a fun little car
These hands and legs have their own personality..At first I thought that I m seeing Eminem show his car
Ahahah
I remember you saying in one of your videos that you found yourself with Carplay crashing regularly when driving, and it would only rectify when you stopped the car and got out. Found this myself after buying a 68 plate Fiesta 2 days ago - found that holding the stereo power button with the next track button for 6 seconds resets the whole thing without the need to get out and stop! Hopefully, that'll sort that for you. :-)
MK8 FiST dream daily car.
Focus RS for track, RS6 for the fam.
If that map is good for the long term then those figures are excellent, I just hope things aren't going to start falling to bits prematurely. You should get your glasses back on, they suit you more than contacts 👍
Great vid as always mate, everything about your videos from the presenting to the camerawork constantly improves with every upload & it's clear how much pride you take in your work. I almost forgive you for those dodgy gold wheels ;)
Jack Scarlett Cheers Jack, high praise indeed! Thoroughly enjoyed your Morgan video, and I weirdly want one now 🤣
This MK8 looks amazing! I’m so mad we don’t get these in the states. I have a mk7 on e30 and it’s a blast.
Thanks - they are really cool cars. I'm really enjoying owning it :)
Getting fiesta ST soon in Poland. Awesome you listed upgrades. Will use few of them for sure.
This was a really entertaining and informative review. I'm usually a vw guy but this fiesta looks a really good car!
D L Thanks mate - very kind words :) very pleased with it as you may have guessed!
Fantastic video production mate! Wow. I'll be using this as a reference video going forwards. Epic wheels too. I just have a MK6 ST150 (with only 32,000 kms)
Thanks Ferrari! Very Kind.
I wouldnt worry about the dyno numbers, a dyno is first and foremost a tuning tool not an accurate benchmarking tool.
hi jb this is bernhard from austria
my fiesta had its first annyv. this dec also first 5 months with revo software (got the idea from your vids,many thx, was
a bit of a pain in the arsch to get it licensed here but it was worth it!)
thx for your everlasting effort to produce great reviews !
Have a nice 2020!
Hi Bernhard! Thanks for your kind words. Glad you are enjoying the car!
You are cruising and the sound is so good, deep mellow tone. 👍
Best looking fiesta since the mark 1 fiesta XR2 🤩
Been looking at selling My E90 LCI Msport 320 for one of these and I'm sold, great vid mate. Can't go wrong at all for the price and I'm shocked how many options there are available in these when I looked, just waiting for the next ncb and I'm sure I'll find the exact one I want with ease
I have a magnetic mk8. Agree with you regarding the paint. Marks v easily. No other issues. It's tame in normal mode but still rapid and a total hooligan in sport. I don't stop smiling. Thanks for the vids
No probs! Enjoy the car 😄
Nice car mate specially the mud flaps it make make the car even more meaner get use now to the mk8 more people do them the more I like them well done mate 10/10 on the car
The colours of the car & wheels matches your jumper.....cute!
I am so sad we don't get these, or the new FoST in NA anymore... it's a shame. Also, I think those wheels might be the best looking stock wheels on any hot hatchback ever. They look amazing.
Cyrus Bebensee Thanks mate 😁
Ay man I love the intro..💡💡.. and the video wizardry..
Alright back to the review..
My Mk7 st paint was so soft it was silly your st looks great and the performance is fantastic for map intake and exhaust
feel like you have done very well with how this car looks considering how controversial the MK8 is, smashed it!
Dont know what the controversy is i wish the us got it
The intercooler is always the issue. It needs remapped again with the new one fitted.
The next software package is still in development :)
Dyno dynamics are a true dyno. I'd say your previous dyno was a little "happy" ,car looks great btw.
Matt Mcmanus Both runs taken on the same dyno, about 9 months apart. There is a video of the last Dyno too 👍🏼
+JB CTR those are some sick RIMS... Love them... Good review J... 👏🏾👏🏾👏🏾👏🏾
Thanks mate 👌🏼
Excellent video as always. I am really looking forward to new things coming for this little car!
I just bought a ST-3 which i pick up next week.
Excellent video it’s a slippery slope modifying cars because it’s very easy to ruin the characteristics and main reason you fell in love with the car to begin with. I’ve just put Revo software on my MK3 RS and still unsure of how I feel about it. Keep the videos coming
Exactly - it's easy to lose sight of where you came from! I'd really like to enhance the characteristics of the original car as opposed to replacing them.
What's the best way of making the paintwork last?ceramics are so expensive and many say a waste of coin?
Loved ur wee video man. But that was a bit of a bummer with the 10 - down was well expecting it to be higher would love to see a follow up on it. But yeah a thumbs 👍up from me on the vid
Cheers mate :D
Not particualarly a fan of ford personally, but fair play to them for this engine, 260 + bhp on stage 2 is bloddy fantastic
This car isn't officially stage 2 either, which is amazing. The software is on the car can be run on a standard car and produce around 245-250bhp consistently. It's a great engine!
Cool car mate and nice videos. Really good work!
Olly Cross Thanks Mate!
Ha I'll be in Basingstoke in the next month I might give the dyno a go, as my car feels more then the 225 mountune quote. Glad your still enjoying the car, recently got mine back after the engine work and new seat and thought I would of fallen out of love with it, but I haven't and the car as a package is hard to beat. I really need something bigger but nothing else floats my boat the car is almost perfect.
chris else Good to hear you are back and loving it! Let me know your results, I’ll be intrigued to hear 😎
What engine work did you need to have mate??? Didn't the mountune m225 affect warranty
@@jordanbye9102 had a oil leak on the fuel shut of valve, Which is in the cylinder head. So had a new cylinder head and block replaced, new cams new water pump and new crankshaft. No warranty was fine as my car was a early engine batch which they know have faults possibly a pre production engine. Although I wouldn't want to chance it if my car was newer.
Great video and great to see all these changes over the past year, it's a really good fiery unassuming car! Bit of a side note but where did you get your Ford Performance reg plate borders from?
Blackwall Studios Glad you are enjoying them! Plates are direct from Ford 👍🏼
I really enjoy your videos! Keep them up. I'm also Driving the Fiesta MK8 ST3 in the performance blue color. Love the little thing. Not really in to modding, but i think yours still looks great with the small modifications. Myself I might also replace my fog-lights. Never understood why they place yellow bulps in them while using the LED headlights...
Michel Verbaas Thanks mate! The fogs may be the start of a very slippery modification slope haha!
Hey Johnny, you should check what Dream Science does in terms of intake for the mk8. They're working on a full 3" intake to turbo system and they've got big intake horns. That would be a great plus if you do a custom remap.
pals bj They’re certainly producing some exciting stuff at the moment. I’m not going for a custom remap for a number of reasons (which I won’t go in to here.) I’ll sit tight for ‘stage 2’ maps to be released, but they’ll need to find a way round the GPF first :)
The subtle mods make this car more appealing! Have you updated the Revo software after fitting the intercooler? Normally have to be remapped after fitting something like that!
Cheers! The software has not been updated just yet. The world of Fiesta tuning is generally performed with generic ECU mapping as this allows for more in depth testing and a more reliable end product. However all of the performance enhancing hardware fitted to the car is not officially supported by the Revo Software on the car, but should be supported by their next software package... which has yet to be released. At the moment, I'm just toying with new hardware to see how the current software reacts :)
Sync 4 announced last week. Starts appearing next year.
Cougarsamurai Woohoo! 😬
Wish the US could get these cars again.
Nice video yet again.👍
I know its personal choice, but get rid of these rally flaps. 🙈
Regards the dyno, what fuel where you using?
Might of got a bit more on a higher octane.
Would you now say the intercooler is worth the £500+ for no gain?
The car is run exclusively on 99 RON 👍🏼 I would still 100% recommend the cooler. From behind the wheel, it feels mega to drive - significantly faster than with the stock cooler, and of course it prepares the car for more horses later down the line.
Perfect little car! Congrats 👍
Jean V Thanks!
Get mine 2 weeks today... Can't wait.
Lemming1970 Enjoy it! 🚗💨
Don’t forget the forced pop-ups when you start the car.. start your Ford and press ok, ok, ok.. change setting 1, ok, ok, change setting 2, ok, ok. ...
Love the videos I've been watching with interest I have the same car colour and 2 door st2. I saw one of your vidds the drivers seat went a little saggy? Have you got it fixed? Also any warranty claims?
Kevin Parr Nope, not fixed yet! I will get it done one day... it sagged but then didn’t really get any worse.
LOVE!!!! Did the miltek exhaust change improve the hp and if so by how much??
I think the bigger intercooler needs to mapped to your current calibration mate...otherwise the ECU will make no changers to the mod :)
Also disappointing that MK8 has the same issue with soft paint like the MK7 ST, I just keep 25 car lengths form the traffic in front LOL
19marshall80 Officially yes it does, but it was mainly installed ready for stage 2 softwares 😁 The Revo software does adjust slightly to hardware changes which is why there are slight gains to be had on this software. The intake is where the biggest hardware gains are to be had with a ‘stage 1’ software
Great job, great car
👏🚙💨🎂
Hi Johnny,
Thanks for all your lovely videos! Do you know if all the 2019/2020 models also sound as good as yours, with overrun and all that? New regulations regarding particular filters was imlemented on EU cars late 2018. For example, the VW Polo GTI’s sound crap now 🤕 cheers
Hi mate, they should do! All ST's (including mine) have a GPF fitted and the overrun is programmed as part of the ECU tune from factory. My car is running Revo software which has slightly enhanced the overrun, but you'll still get it as a stock car. I also have the Milltek exhaust which of course makes it louder too.
JB CTR thanks for your kind response. I feel even more confident, that the Fiesta is my next car (upgrading from my current R32 mk5). 🚀 Your videoes play a Big part in my buying descision, you should be paid by Ford 😂👍🏼
I will add the milltek ASAP and might go with a Revo Tune as well. But i am just nervous about loosing the warranty - whats your thoughts on that? Revo vs Warranty?
Emil Wilkens glad you are enjoying them! Warranty is a very grey area. Generally speaking, Ford are one of the more lenient manufacturers (in my opinion) with modifications. The stance they tend to take is that you’ll only invalidate you warranty on the parts that are impacted by your modifications. So if you modify, you don’t totally lose your warranty. 👍🏼
JB CTR your welcome.
It is also the engine warranty i am mostly concerned about - as i expect the engine to be the most expensive, complex and critical parts of a car. 🙈 but thanks for your feedback man. Keep pushing out vids on that beast you got there
There is an update that you need normally for the intercooler as it is bigger than stock one.
bulskyne Not yet released. Only ‘stage 1’ softwares currently available for this engine.
With great power comes great, , , stopping ability
Have you updated you’re sync 3 if you have then you need to turn off WiFi and automatic updates it will make the system a lot faster. Also as well if you hold down the reverse track and the power button it will put you’re car into testing mode for the sync then go into testing setting got to the HMI and put it to log all then it means that it logs all you’re sound and make B&O come alive.
Thomas Moignard Some top tips here. Loving this!
JB CTR If you need anything else I’m a ford tech so any time to help out
Love the video’s you’ve done a great job with the mods have fitted the low line kit and rally flaps they look great as you say the rally flaps as well as look good they should help protect the paint work thanks for giving us the update look forward to the next one
rgcsc Cheers mate 👌🏼
I'm so jealous I want a mk8 e door so bad I'm in the states we have the MK7.5 4 door (5) including hatch they look so good I have the 7.5 Molten Orange
Yeah I want the MK8 idk if u stopped by my channel but it's so much better than my car and ur 3 door it's not fair lol
To be honest I used to get rattles in my '18 Mini JCW within a few weeks and that car was just over £30k
Yeah, unfortunately I think it's a modern car phenomena.
Its stupid how US dont get Fiesta and Focus ST anymore.
I agree. They're great cars.
Nothing wrong with the car. You’ve just added a new cooler thinking it’ll increase bhp in its own. It needs stage 2 for that to be utilised and increase figures. Right now that cooler isn’t doing much more then the stock one.
Hi Jonny! Love all of your videos, it is you that gave me an idea to modify my own FiST, also thanks for DIY videos, I'm sure it prevented some broken plastics during bulb changes :D Can you tell me, how the MPG looks after REVO and before? Did it increase or decrease?
Phercan Glad you are enjoying them! The Revo software increases the fuel economy if you can drive is sensibly. Hoon it, and it’ll decrease it 👍🏼
Nice vid mate! How much torque did it make when it put down 252hp. I would like to do the same mods to my mk8 st, which powermod do you recemend to do first ?
Pieter R Just over 300 ftlb 👍🏼 for power, definitely the Revo software. It can be run on a stock car.
Hey! Nice video mate, could you please tell me how many miles did you do with 260+ hp? Did you have any huge engine problems?
Thanks - Hard to say exactly as the modifications have been added gradually over the past year or so. Current mileage on the car is approaching 20,000 and the Revo software has been on for over 10,000 of those miles.
What about the lowering springs you installed ?
Love the vids! Really making me want to trade in my mk3 octy vrs for a fiesta st. You have done a fair few upgrades but i was wondering what your thoughts were regarding warranty?
Jake McCloud They all affect the warranty in different ways!
Car looks great man. What spacers have you got on there ? I have a mk7.5 and what to achieve a similar look.
Alex Allkins Theyre 20mm all round. Did a fitting video here if of interest. ua-cam.com/video/uwsUYgPFx10/v-deo.html
Mine made 303hp on Devil Developments Dyno then 310hp at The Tuning Society, going to see what it makes at Surrey Rolling Road next month
Sam Thwaites Interested to hear the results 👌🏼
this cant be on the mk8 fiesta st bec no way anybpdy made this power on a three cylinder this must be whp not bhp
wayne allan Sam’s is a MK7 👌🏼
Johnny, I have Revo+Milltek and I noticed in your videos that when you shift down gears you are getting pops and bangs, I only seem to get these bangs when I’m up shifting with the revs at 4K+
Should I be getting these bangs when I downshift with the overrun?
Or are you rev matching when you downshift to create the bangs?
Cheers
Maca0716 All about the rev match 👌🏼 the best overrun is to be found there haha
Nice mods 👍
wow how amazing the REVO dyno made so much power, but with a new intercooler and independent dyno it made less?
This is the same dyno as the first one. You can see the first run here:
ua-cam.com/video/nbIjidhRros/v-deo.html
Are you aware of all the problems this car is having? I'm an ST owner, since June 2019, only 4 months and my car has a minimal oil leak and the steering column problem as well. Does your's have or had this before? Aren't you worried that you lost the warranty? You also mentioned the rattling plastics, but there I agree, it doesn't annoy me anymore, as the car is brilliant to drive. Also, do you recommend a Milltek exhaust with or without GPF? I was waiting for Mountune, but they take forever to release their products..
Nice video as usual!
Pedro Figueiredo Hi mate, yup there’s a small portion of them with issues. Always the way with a new car. They’ll get sorted 😁 I’ve got the GPF back exhaust and it is more than loud enough for me, and still legal 😎
my car has an oil leak as well its been in the local ford garage 2 months im losing the will to live .Where is your leak mate?
@@alistairsmyth9792 hi mate, it wasn't an oil leak after all (said Ford), just some residue that was cleaned and never appeared again, but the first engines made till February 19 are prone to have oil leaks, near the
alternator. My steering column had to be replaced, under warranty.
Hey pedro did your car also smell through the ventilation?
@@lemmykoopah Nope
Hey Johnny, do you think that the induction kit and intercooler could've reduced power output?
A lot of people I know told me that a cone filter isn't necessarily a good thing with a stock map because the car wouldn't know how to use the large quantity of air and of higher temperature.
You have the Revo map tho, so this worries me.
Could you do a run with the stock intake box? Maybe it's really "impeding" power
Jeremy Clarkson Hi there, not entirely sure the intake is to blame here. The car has been run at over 260hp with the intake. At the time, this was the most powerful MK8 run to date and cars with the stock air box were down on power.
Doing some intake comparisons on the Dyno does sound like it could be a good video though - so I’ll see what I can do to sort that 😎
@@JBCTR Thanks! What do you think of the motor mount now that many months have passed?
I've just recently bought the MK8 ST and I'm interested in modding it like you did, I've also seen your posts on Reddit so I know you're pretty active on this stuff
Jeremy Clarkson The motor mount is a great upgrade. It makes a real difference (I did a video if you’ve not seen it!) There have been some failures on them, but I’ve not been affected by them 👍🏼
@@JBCTR Thanks again!
Yeah I've seen the video and that's why I'm interested in buying one now.
What’s the problem with switching between car play and sync? It worked nice.
They've updated it recently. When this was filmed, it was really clunky.
So you don't regret buying it then?
m ws Not at all - it’s a great car!
Why do you use spacers to increase the track width and not just get wider wheels?
Honestly? Spacers are cheaper. I did eventually get wider wheels. There is a video on that :)
Looking at revo stage 1 and the new engine mount you did. Would you recommend this on a car that’s didn’t have the PP?
Hey! Yup, it’s still awesome. You may get a little more wheel spin but there are plenty of cars without the PP running the software.
Just found this great video, what rims are those?!
I need help with wheels and tires, this is my first car i've ever wanted to mod.
Keith Mondor Hi mate, they are just the standard ones that come with the ST3, but I’ve wrapped the diamond cut parts in gold. Here’s a how to:
ua-cam.com/video/7T860PPthKQ/v-deo.html
Do any of the modifications that you have done void the Manufactures warranty ?
Sam Vessey Some of them impact the warranty, but most of them have their own warranty with the manufacturers if they go wrong.
Been so indecisive on cars and the GTIs are so steep in price and I would be probs annoyed I skimped on the performance pack and whether manual or DSG is the choice lol. Is this fiesta worth the money? The rear end puts me off the whole design though IMO lol. This is the colour grey I want in general too.
There are pretty significant discounts to be had on these if you hunt around, which makes them a fair bit cheaper than their competitors. This is my second Fiesta ST and I certainly don't regret buying it.
Currently waiting for the delivery of my ST and you made me want to make the upgrades too. Damn. How much did these mods cost?
I havn't added it up, nor do I want to haha!
@@JBCTR The only thing I'm going to change for sure are the light bulbs (fog lights, reversing light, and the rear blinkers. I was also thinking about wrapping it with a paint protector film. In my area people are extremely careless and have tendency to bump others cars in the parking lot with their doors.
Did you have the Milltek-exhaust before or After the 262hp?
What fuel you are Running?
Heard a lot that the Milltek eat some HP....
malagutino 99 RON fuel and both runs had the Milltek on. I’ve not heard of people losing HP with a GPF-back before :)
JB CTR tanks, was something else fitted After the first run?
Need to remove that larger intercooler to find that 10hp and restore torque and midrange , or get a custom tune. My sync 3 works fine with android ;)
maddogdragracing I’m not entirely sure it is the cooler. Other vehicles have made power with the larger cooler. As gains are so good with just software, the stock cooler can get heat soaked (shown by thermal cameras). Weirdly, it also feels faster from behind the wheel.
@@JBCTR easy to find out . Fit a bigger "bucket" and it takes longer to fill. Butt dynos are rarely calibrated and cannot be trusted ;)
@@JBCTR look for loose clamps. You might have small boost leak.
How have you found modding the mk8 with. GPF? Thought having a GPF would make an aftermarket exhaust pointless but in your case it’s seems not 🤷♂️
Less of an issue than I thought it would be!
Has the car been reliable? Any oil leaks or anything like a lot of them have been having? What mileage you sitting at?
SASR Firestorm Hi mate, the car is great and I’m just approaching 20,000 miles 😎
i wonder if 'tubodynamics' have come up with a hybrid turbo for the mk8 yet. i had to wait 18 months for them to develop it for the 1 litre ecoboot.
TheJeremyevans Looking forward to what they come up with 😉
@JB CTR What about the engine ? Is it reliable ? And avg fuel consuption?
jordan paok Had no problems. Averaging around 40mpg 👍🏼
Regarding the SYNC 3 navi- did you succes getting the F8 map on?
Bo Jensen I’ve not updated Sync 3 yet as it is still working fine 🤣 I may have a stab over the coming months.
May be a stupid equation but why do all cars that have been modified use shell petrol etc
99 Octane = bigger bang. Can use Tesco momentum too.
So I made my rims copper, and installed the milltek exhaust with burnt titanium tips. But I am still thinking about the stage 1... Help me out on making this choice D:
Tobie Eve Watch my videos again 🤣 wheels are looking superb mate. Thanks for sending in the picture!
What size springs and spacers did you have on this? Wanting to get the same look
20mm for both!
@@JBCTR legend, miss the content!
I wonder what the long term longevity of that three pot will be, especially when you tune them?
The 1 litre 3 pots barely make it past 60k miles, if you get them up to 180bjp you ain't got long before they blow, not sure on the St 3 pots in the mk8
@@jordzz174 Might be comparing apples and pears but a 5GT Turbo I bought new in 1985 covered 60k in three years with no engine issues and that was with the wick turned up and a nitrous kit.
There not made they they used to made them, due to emissions they get properly choked up.
Dont go chasing figures if the car is healthy as it'll just take the fun out of the car 👍🏻. How is the car riding on the kw springs?
KW springs are a little firmer than stock as you'd expect but certainly not back breaking. I've dailied the car for over 15000 miles with the springs on now and still happy with them. Bang for buck, they are brilliant.
Maybe Revo stage 1 needs to be reajusted? With all the improves the car doent know what to do with all these resouces... I dont know... Explain me if i do(
Rafael Branco The Revo software will adapt to hardware changes, which is why you can see slight improvements with hardware changes. Although with the hardware on my car, it is ready for the next lot of software which is yet to be released. Hopefully soon 😁
Rafael Branco now pumaspeed done one at 300hp on stock engine mk8
Wow
What mm are your wheel spacers Jonny boy
20mm all round
oil consume
?
Just a quick question how long have your front tires lasted ..mines totally standard so far ...
john dickinson First set 8000 miles. Second set, approaching 10,000 but they’re pretty spent. Still legal, but not performing that well!
@@JBCTR thanks for the reply ...keep up the videos they are always very informative ..
john dickinson Cheers, glad you are enjoying them!
We all know *I'm the dyno king*
My 1.5 MK8 fiesta produces 85 BHP!
it's a tdci...
I feel you need to provide proof of this claim ;)
@@JBCTR You're right, I've probably lost a few since it came out of the factory 🤣
what wrap have you used on the head lights?
No wrap - they are completely stock :)
Where did you get your number plates made up at?
Demon Plates. Expensive, but good quality!