MK8 Fiesta ST - REVO Intake System INSTALL 🔧
Вставка
- Опубліковано 23 сер 2020
- I hope this video was of use! As always, I've put some links below to this kit and tools useful for fitting and installation:
Intake Technical Detail (Revo Site): bit.ly/RevoIntakeSystem
Purchase Revo Intake here: bit.ly/BuyRevoIntakeSystem
Tools:
Trim Removal Tools: amzn.to/33SfKh2
Socket Set: amzn.to/32it4Jj
Hex Keys: amzn.to/32it4Jj
Road Review & Sound Check: • MK8 Fiesta ST - REVO I...
*************************
FACEBOOK: / jbctr
TWITTER: / ctrjonny
INSTAGRAM: / jb.ctr
*************************
MODIFICATIONS MADE TO MY MK8 FIESTA ST:
LED Fog Light Upgrade: • How to Install the CEU...
Milltek GPF Back Exhaust: • MK8 Ford Fiesta ST - H...
NextBase Dash Cam: • MK8 Ford Fiesta ST - H...
C:Performance Induction Kit: • MK8 Ford Fiesta ST - C...
ST Suspension Lowering Springs: • MK8 Fiesta ST - How To...
REVO Software: • Revo Stage 1 MK8 Ford ...
Security Upgrades: • 8 Ways to Secure Your ...
Wireless Charging Pad: • MK8 Fiesta ⚡️ Wireless...
Powerflex Torque Mount: • MK8 Fiesta ST - PowerF...
Brake Upgrade: • MK8 Fiesta ST - HOW TO...
Spacer Install: • HOW TO Install Spacers...
Splitter and Skirts: • MK8 Fiesta - Splitters...
Wrapped Wheels: • How to VINYL WRAP your...
RallyFlapz Install: • MK8 Fiesta ST - HOW TO...
Pro Alloy Cooler: • MK8 Fiesta ST - How to...
*************************
MY EQUIPMENT:
Sony A6300: amzn.to/2r2fzLk
35mm Sony Lens: amzn.to/2vItxHP
Zoom H1n Sound Recorder: amzn.to/2LfdubG
GoPro Hero 5: amzn.to/2zYQloy
GoPro Suction Mounts: amzn.to/2Li5eru
DJI Osmo Mobile 2: click.dji.com/AJriccr7-TReoaLX...
DJI Mavic Pro: click.dji.com/AHiZZW29sqkjHChQ...
(The links above are affiliate links to DJI and Amazon. If you purchase a product after clicking one of my links, I will receive a small commission which goes towards running the channel and creating more content for you to enjoy! This is of course at no additional cost to you. Thank you!)
************************* - Авто та транспорт
You really should have more subscribers, the quality here is off the charts. I have a feeling you're gonna be getting a lot of attention soon!
Thanks mate. Here’s hoping! 😂
Agreed!!! Bloody fantastic
Teaser sounded awesome! Great install video 👍
Love the content man ! Such chilled videos could sit and watch them for hours top work mate !
Cheers mate 😎
This sounds and looks so incedible.Nice Video!
Cant wait to see the road test =) Really want a MK8 ST myself.
Get a MK7.5 there way better
You may have just made me more tempted than I already was😂
My bad! 😂
Finally a UA-camr that plays good music through their videos 🤙, i'm definitely getting a MK8 ST next 😁
Nice video and great bit of kit!
Looking forward to this
Nice explanation video there :) GOOD JOB REVO
Your greatest fan has returned! 😂
Good video man 😊👍
Ashley Meade Haha, cheers Ash! Hope you are keeping well 👍🏼
Awesome video man!
Kyle Fisher Cheers mate 😎
More upgrades 👌🏻
Very nice video! I'm going to import Revo😉
You are The best to make this type of video, please don’t stop ti do this!
(Sorry for my english, by Italy) 🔥🔥🔥
Thanks for your kind words! Your English is much better than my Italian!
dude that sounds so fucking cool
Does this kit fit St-line versions? Or is there another REVO kit for it?
with that link it can be send outside England?
What brand your wheels and what size your wheel and tire?
is this only de revo syteem or blow too
Hi great video AGAIN 👍. My mk8 ST is standard at the mo but I’m thinking of doing some of the mods you’ve done. My question is have these mods affected your insurance premiums much...?
Not personally, no. My car is on a modified policy which id highly recommend if you plan on modifying 👍🏼
Will this fit on upgraded turbo elbow
I too have lost one of the little rubber grommet things. If / when you find somewhere that sells them, I'd appreciate a link to it. Thanks.
Ford sell them, but SCC Performance managed to source mine 👍🏼
Hi ! Can i fit on st line ford puma diesel 1500cc ??
Looks nice. What’s up with the high pitched squeak when you rev it up?
thats the turbo spooling mate/sucking in air sound, but can also be a minor air leak around the turbo to intake pipe joint and its sucking air through the tiniest of gaps, thus the squal,, but mostly just spool/suck sound, my 1.0 does the same
Stock air box if your chasing performance, aftermarket for the sound
We offer an open cone and OEM+ system (uses the stock airbox) and testing clearly showed improved airflow and performance with the open cone system over the OEM+. The airbox will still be a restriction. Have a look at onlyrevo.com for more information.
Will this not suck in more hot air from the engine bay compared to a airbox from further below? Was thinking of getting a mountune airbox with revo intake tubes if that would work, but you hear so many things it’s hard to know what to believe when it comes to induction kits
Hard to tell. If the car is moving, I highly doubt there will be any heat soak at all.
If the car is stationary, it’s likely it’ll heat soak a little quicker than a closed box. That said, all intakes will heat soak eventually if the car isn’t moving.
Good video, did your insurance go up with the new induction kit
Thanks and Nope. I’m on a modified policy, so no change for me.
Not a bad intake at all, Revo imho is the 2nd best after proalloy though :)
100% correct!
Lots of people have said this to me and if it is, fair enough. But I haven’t seen any test figures on the proalloy (and it is more expensive with the crossover pipe than the Revo). Revo have published their test results up to 14bhp max and it can flow air up to 700 CFM. What can the pro alloy do?
I dont understand how the cone filter can be better than the original? Isn't it sucking air from around the engine, which is robably hot. The OEM filter however is directly connected to the intercooler right? So how can the cone filter be better? Moreover, the Code filter is much cheaper from Material cost point of view (I do work as a cost engineer), so why did the OEM not go for it?
Thank you for the content!
But it really looks like you need a night of good sleep haha, take care m8!
This is what UA-cam does to you 😂
Great video nicely done after all of this just hope u gain more power and toque from the last one it dosnt look cheap so hope worth the money but it dose look nice don’t like the bird sound tho when u Rev it up it sounds u got a bird in the video
You should buy air scoop from dreamscience it's a easy to install and you have a great result. And with your revo kit it'll be super 👍
They look awesome but unfortunately don’t fit with my intercooler :(
Can you do a video about strut bar Ford performance ?
I’ll see what I can do!
do you want to sell old Intake? ^^
great video as always!
Is that without a remap too ?
With remap!
Im so mad that i cant order my st3 cause of all of that covid bullshit cause production in ford is limited. I intend to go full revo (wheels, map, air system) like yours. Keep up the good work and enjoy your car.
Cheers Leo! It’ll come around quick enough 😁
I want this so badly, but changing to an open intake can be an issue when trying to get the car through mandatory inspection in Denmark. The rules are overly strict.
A closed System is available Also www.onlyrevo.com/product-details/air-filter-intake-kits/ford-fiesta-st-mk8-oem-intake, its a full system all the way to the turbo, just like the kit in the video, the only difference is that it retains the factory airbox, perfect for countries less sympathetic to tuning :-)
har også selv set på nyt indsugnings sæt til min mk8 st. måske kan mountune´s modificerede luftboks godt sniges igennem syn. har dog ikke helt den samme lyd.
We do have a OEM+ option which keeps the original airbox 👍
@@RevoHQ Is the OEM+ kit the same two silicone hoses and the crossover pipe? (Then I could simply run this kit, and then swap for the OEM airbox when going for an inspection :)
@@kristian9084 Jeg har før kun haft super tarvelige biler, så mk8 ST er min første "ordentlige" bil. Jeg vidste faktisk ikke, at reglerne var så strikse før nu. Tror du, at det er muligt at få bilen igennem med sådan et kit som dette?
Fiesta st 2 2018 performance Blue, fully loaded, get my new car on Friday,, B road's next destination lake district 👌
Congrats mate! Enjoy the new car!
What kind of bhp are you running these days
I’ve not had it dyno’d for a while. The past two are on my channel :) between 255 and 265 I would expect 👍🏼
Please do a bonnet struts video
I’ll see what I can do!
Dumb question but what does it actually do or improve?
Simple English just sucks in morecold air into your engine and produces more power and torque
@@aqibmehboob976 Only if you have a map which takes the kit and extra airflow into account
As above, more air = more power. But unfortunately we now have ECU’s. If you run stock software the computer will likely say ‘thanks for the air, but no thanks’ and then dial back the power.
A stage 1 car (software only) is likely to produce a little above quoted figures with an uprated air intake, but to make the most of it you need software to accommodate intercooler, intake and (usually) and free flowing downpipe. This software hasn’t been released for the MK8 yet.
Gorgeous car, that would be the same color i would get if they offered it here in the US. Another thing i wish we got was the 3 door model like that.. we just get the 5 door hatch back 😭 whyyyyyy!?
You get cool trucks though. So we’re jealous too 😂
@@JBCTR ha, well that's true. I love my Ram 2500 with the 6.7 Cummins
I do have a Fiesta 5 door and i rallycross it.. i posted videos of it on my UA-cam
I’m really after a mk8 St my self, is this car remapped ??
he has revo stage 1 software on it
As above, the car has Revo software on it. Video here: ua-cam.com/video/5DdbD9E-WC4/v-deo.html
I wouldn’t worry about those rubber boots they don’t really do much it’ll be fine on just one no load is really on that piece just to save you some money.
Yea my wipers ain’t coming off like that, they’re not budging
What wheels are they?
I think they are the Revo ones
Wheels ?
Revo wheels. Video on them here:
ua-cam.com/video/Y1ZT2KLIyps/v-deo.html
I was going to do this when I collect my 23 Plate, But then I remembered im 35 and getting too old for loud cars now 😂
Never too old!
Them wheels are fit
How much do they bench?
REVO sticker = 10bhp+
I’ve got two. 20hp?
This is MK4, but never mind xD
Darrey what is a MK4?
JB CTR title of the video mk8 but this is mk4 fiesta clickbait
Darrey the MK4 fiesta was produced between 1995 and 2002 - this is very much the MK8 Fiesta and not click bait in the slightest 🙄
Remap!!!
All that for a stupid sqeeeeking sound😂😂
If that's a brand new Fez you just made it worse. Over time your going to do more and more damage to the car. Send an update when it's in 30'c outside and your intake is just sucking in hot air, not only from the engine but the environment. These so called heat shields have absolutely no impact. You will destroy your engine in the long run. Ford spend millions just to make the air/fuel combination perfect and efficient. Sorry to be negative but this is the sad fact. Nice Fez anyhow.
good video but you bought wrong car lad 3 cylinder peace of shit see how long it lasts you should have bought the mk7
Sounds horrible 😆
overpriced lol waste of money aswell u had good intake lol
No good 👎