Great video I have t mobile so it looks like parsec would be best. A couple of questions does the pep wave router support visible SIM card? Also I have a 2021 Tiffin Allergo bus with the roof mount wings on the side for air flow, does the parsec need to be installed above the side and front wings to get better reception? Thanks, Keith
Hi Keith, the Parsec is our highest performing omni roof antenna antenna and yes supports 600mhz for tmobile, great choice. As of Sept 2021 Visible works on our Pepwave devices. Visible is designed to be used with a phone, not a hotspot so this may change but many of our customers report Visible working great. Here is a kb article on how to set the APN settings in our modem for Visible use: support.mobilemusthave.com/support/solutions/articles/67000460963-visible-data-plan
Thanks for the info! Super helpful. Quick question -- If I went with the Parsec for the boost, would it be possible for me to shorten the cables? I literally need 3 ft of cable where I'm mounting mine and would rather not have all that extra cable, plus any cable loss from such long cables. I'm new to this stuff, so I don't know if those wires can be cut and new fittings put on the ends. Thanks!
Good Question, currently no, Parsec does not offer a custom cable option, but we did just order a bunch of Parsec with 6.8ft of cable and you can opt for that option.
Hey Ian, typically with metal roofs you see silicone based roof products which are not as self leveling (since the roof is curved) and also provide a stronger bond with metal. That said gluing down a magnet antenna is a bit tricky. Have you looked at the Parsec K9? Its super low profile and narrow so perfect for a curved roof and has a magnet mount options as well which you could secure similar to what you explained before. I'd probably look at a silicone based product not dicor for a stronger bond with a metal roof application similar to what airstream OEM uses on the Interstate roofs we've worked on. K9 is covered in our newer antenna mounting overview video here: ua-cam.com/video/SYiZ0bWw5uo/v-deo.html and the product link is here: mobilemusthave.com/products/parsec-k9-pro-7-in-1-low-profile-performance-antenna?_pos=1&_psq=k9&_ss=e&_v=1.0
Does the parsec Husky 7-1 need a Ground Plane? I want to mount it on a plastic junction box above my Girard awnings. I bought the round ground plane, but do i cut it square and mount it to the box? thanks!!
A ground plan is always helpful to an antenna as it helps collect the signal that is bouncing off things. It is NOT required, unless our listing states it, but always suggested. The ground plan needs to be a few inches away from the antennas surface to create the effect. If you box isn' that big, you will still get great performance skipping it. Look for our video on the Speed Demon install and you can see how we mounted one on a junction box too.
Thanks Andy…I plan to procure a pep wave duo Cat 12 modem so I want a 7 in 1 antenna but I want to support the 600 MHz band. Does the poynting antenna now support this? Which antenna would you recommend now? Thanks
Hi Joe, the transit duo does not support band 71. The transit cat 18 does. Remember band 71 is only available on TMobile too. The Parsec and MobileMark support this frequency tho!
I have a MobileMark antenna I'm about ready to install. I have a ground plane on it and planned on using tape to hold it in place. I noticed on the Parsec that it had some type of 3M tape. Any chance you could tell me which tape that is? I'm thinking of using 3M VHB tape, but if something else is better I'm interested. Thanks.
Hi Steven, we sell sheets of vhb tape on our site in 12x12 sheets but you just as easily just drill 4 holes at 12, 3, 6, 9 o clock on the ground plane to secure it and dicor over the screw heads as well as the perimeter of the ground plane to water seal it. Make sure to also tighten the nut to ensure the neoprene gasket and ground plane are water tight. Vhb here: www.mobilemusthave.com/3M-Double-Sided-Foam-Adhesive-12x12-Sheet_p_1333.html
@@MobileMustHave Thank you for your reply. I thought about fastening the ground plane, but I have no way to tighten the nut once the antenna is in place unless I cut a large hole in the ceiling. I was thinking of using VHB tape and Dicor the perimeter. Ordering the sheet of VHB is my next step. :)
6.8 ft = 2 meters. 3 meters is 118 inches or nearly 10 ft. I am guessing you meant to say everything you sell has a 3 meter antenna cable as a 6 ft cable would be useless in an rv,
🤦🏼♂️ corrected myself in another comment. Yes they are 2M cables at 6.8ft. For most this is more than needed, but the Parsec does come in a 15ft option.
We dont sell Mofi modems but I believe they have standard SMA connectors on the cellular and RP-SMA connectors on the wifi ports so you shouldnt have any issues using an antenna like this with a mofi. Please double check with your Mofi manuals/point of purchase but it should work!
hello, please reach out to us at info@mobilemusthave.com to discuss options. This is something managed by the carrier so using a VPN normally by passes the carriers NAT settings
Andy, yet another AWESOME video & explanation of the various antenna choices!
Thanks again for your knowledge & sharing... 🙂
Thanks for the info on the Parsec antenna, especially the mounting options.
Thanks Andy! Appreciate the info!
Great explanation of the different antennae. Thanks.
Glad it was helpful!
Thank you! Very informative to help me decide on my options
Great to hear!
Great video I have t mobile so it looks like parsec would be best. A couple of questions does the pep wave router support visible SIM card?
Also I have a 2021 Tiffin Allergo bus with the roof mount wings on the side for air flow, does the parsec need to be installed above the side and front wings to get better reception?
Thanks, Keith
Hi Keith, the Parsec is our highest performing omni roof antenna antenna and yes supports 600mhz for tmobile, great choice. As of Sept 2021 Visible works on our Pepwave devices. Visible is designed to be used with a phone, not a hotspot so this may change but many of our customers report Visible working great. Here is a kb article on how to set the APN settings in our modem for Visible use: support.mobilemusthave.com/support/solutions/articles/67000460963-visible-data-plan
Thanks for the info! Super helpful. Quick question -- If I went with the Parsec for the boost, would it be possible for me to shorten the cables? I literally need 3 ft of cable where I'm mounting mine and would rather not have all that extra cable, plus any cable loss from such long cables. I'm new to this stuff, so I don't know if those wires can be cut and new fittings put on the ends.
Thanks!
Good Question, currently no, Parsec does not offer a custom cable option, but we did just order a bunch of Parsec with 6.8ft of cable and you can opt for that option.
Great instructional video. Thank you
Glad you enjoyed it!
Very helpful video, thank you!
Thoughts about that Parsec 'magnet mount;' but dicor sealed to the roof of an Airstream; cables run via the fridge chimney?
Hey Ian, typically with metal roofs you see silicone based roof products which are not as self leveling (since the roof is curved) and also provide a stronger bond with metal. That said gluing down a magnet antenna is a bit tricky. Have you looked at the Parsec K9? Its super low profile and narrow so perfect for a curved roof and has a magnet mount options as well which you could secure similar to what you explained before. I'd probably look at a silicone based product not dicor for a stronger bond with a metal roof application similar to what airstream OEM uses on the Interstate roofs we've worked on. K9 is covered in our newer antenna mounting overview video here: ua-cam.com/video/SYiZ0bWw5uo/v-deo.html and the product link is here: mobilemusthave.com/products/parsec-k9-pro-7-in-1-low-profile-performance-antenna?_pos=1&_psq=k9&_ss=e&_v=1.0
Thought I recognized Tiger Run!
Any update on the Poynting and T Mobile SIM card compatibility?
Thanks
Poynting is working on Band 71 support, but no update yet.
so helpful! thank you!!
You're so welcome!
Does the parsec Husky 7-1 need a Ground Plane? I want to mount it on a plastic junction box above my Girard awnings. I bought the round ground plane, but do i cut it square and mount it to the box? thanks!!
A ground plan is always helpful to an antenna as it helps collect the signal that is bouncing off things. It is NOT required, unless our listing states it, but always suggested. The ground plan needs to be a few inches away from the antennas surface to create the effect. If you box isn' that big, you will still get great performance skipping it.
Look for our video on the Speed Demon install and you can see how we mounted one on a junction box too.
Thanks Andy…I plan to procure a pep wave duo Cat 12 modem so I want a 7 in 1 antenna but I want to support the 600 MHz band. Does the poynting antenna now support this? Which antenna would you recommend now? Thanks
Hi Joe, the transit duo does not support band 71. The transit cat 18 does. Remember band 71 is only available on TMobile too. The Parsec and MobileMark support this frequency tho!
I have a MobileMark antenna I'm about ready to install. I have a ground plane on it and planned on using tape to hold it in place. I noticed on the Parsec that it had some type of 3M tape. Any chance you could tell me which tape that is? I'm thinking of using 3M VHB tape, but if something else is better I'm interested. Thanks.
Hi Steven, we sell sheets of vhb tape on our site in 12x12 sheets but you just as easily just drill 4 holes at 12, 3, 6, 9 o clock on the ground plane to secure it and dicor over the screw heads as well as the perimeter of the ground plane to water seal it. Make sure to also tighten the nut to ensure the neoprene gasket and ground plane are water tight. Vhb here: www.mobilemusthave.com/3M-Double-Sided-Foam-Adhesive-12x12-Sheet_p_1333.html
@@MobileMustHave Thank you for your reply. I thought about fastening the ground plane, but I have no way to tighten the nut once the antenna is in place unless I cut a large hole in the ceiling. I was thinking of using VHB tape and Dicor the perimeter. Ordering the sheet of VHB is my next step. :)
6.8 ft = 2 meters. 3 meters is 118 inches or nearly 10 ft. I am guessing you meant to say everything you sell has a 3 meter antenna cable as a 6 ft cable would be useless in an rv,
🤦🏼♂️ corrected myself in another comment. Yes they are 2M cables at 6.8ft. For most this is more than needed, but the Parsec does come in a 15ft option.
Are the antenna cables 3 meters(9.84 feet) or 6.84 ft?
ah! you got me! they are 2 meter (6.8 ft).
Are these antennas compatible with mofi modem?
We dont sell Mofi modems but I believe they have standard SMA connectors on the cellular and RP-SMA connectors on the wifi ports so you shouldnt have any issues using an antenna like this with a mofi. Please double check with your Mofi manuals/point of purchase but it should work!
I need help with my pepwave bri mini. Trying to play Xbox and my nat type is on strict. How can I change my upnp
hello, please reach out to us at info@mobilemusthave.com to discuss options. This is something managed by the carrier so using a VPN normally by passes the carriers NAT settings