Відео

link just added! yes, we still price match!

Totally possible! But John opted out. He uses Starlink as his primary and he said he would update the antenna once he felt it was needed. Thanks for watching! - Andy

Hi Joe! Yes, this will work with a silicone roof, but you'll want to use a slicone sealant to help ensure it can remain secured to your roof. You can also mount it using screws, then would just need some waterproof sealant about the screw holes. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

@@MobileMustHave k, thanks!

That would've definitely been a nice addition. Would be nice to see more PoE input/output capable routers in the future, so fingers crossed! If you have any questions about which Peplink routers currently support PoE, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Nope, either house battery is fine! TST does say not to install it in the engine bay though due to the excessive heat. The repeater just needs to be wired to a 12V power source. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

For sure! So, the Through Bolt/Kickstand Release Lever option comes with mounting bolts to directly secure it to your roof, plus a Kickstand Release Lever, which allows you to remove the dish and move it around if you happen to be in a location where your RV/Trailer is parked underneath trees, for example. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes, you can! You can easily control which connection is your primary and backup to help limit your data usage through the Peplink dashboard! We actually made a very helpful article that helps you manage multiple internet sources on your dashboard: support.mobilemusthave.com/en/support/solutions/articles/67000717366-managing-multiple-internet-sources Check that out and If you have any follow up questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Thanks for reaching out! Yes, that is correct! The Parsec Falcon can be purchased with the correct TS-9 connectors, which will allow it to connect to the non-pro Nighthawk M6! Here's a link to the Parsec Falcon on our site: mobilemusthave.com/products/parsec-falcon-2x2-mimo-lte-lightweight-antenna?variant=39822720532579 If you have any other questions, feel free to reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Actually I just asked about this and Jacob at MobileMustHave support says, "Our M-Series Plans are not comptaible[sic] with all Peplink routers. We are in the process in updating the website now to reflect that information."

Links coming very soon, stay tuned post 4th of July for purchase options or reach out to us if you need sooner for a trip,.

Hmm I'm not sure why the link will not pull up the pole for you. I just tested it and it works for me on my end. Could you try this link and see if that pulls it up for you: mobilemusthave.com/products/mmh-20-telescoping-antenna-mounting-pole-in-carbon-black-20-foot-mast If it's still giving you issues or if you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

@@MobileMustHave thanks. That one works!

So, the B One 5G does have 2 WAN ports, but it lacks the FusionSIM hardware feature, so it is not compatible with our M-Series Plans, unfortunately. It is compatible with our physical SIM, single-carrier, data plans though! If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes but if you have a roof surface that is not compatible to vhb or porous you can spray add dicor around the landing pads for added measure to keep the water out, add strength but still have something removable.

Hello! Thanks for reaching out! So, the Basecamp will not work the B One 5G, but it will work with several other routers we carry. It does sound like a call may be beneficial with one of our reps so they can go through our options with you and see which route would be best for your needs! Here's a link on our site where you can schedule a call with one of our reps for whichever date and time works best for you: mobilemusthave.com/pages/consultation

Thanks for reaching out! For sure, I think we can definitely help you out! So, for a rubber/EPDM roof, you'll want to clean the surface with mineral spirits. Then, while not required, you can also use an abrasive to help prep the surface some. Then, all you need is some silicone or water sealant like we sell, Dicor. This will secure the ground plane to your roof and you should be all set! If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! Do you mean in terms of how long the installation may take? If so, installation times can vary, but usually a full setup with a router and an antenna can take an hour or so depending on the setup. Adding in Starlink can take an additional 30min to an hour, roughly. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! So, you can purchase the Trio Flatmount from our website here: mobilemusthave.com/products/starlink-gen-3-trio-flatmount?_pos=2&_psq=trio+fl&_ss=e&_v=1.0 If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! I'm sorry to hear you're having issues getting your Starlink connected. So, for this situation, you wouldn't need to put it in Bypass Mode since you aren't using the Starlink router in your setup. Instead, the issue may be because the WAN port could be set up as a LAN port right now. We have an article we made that can help show you how to convert the LAN port to a WAN port and vice versa. Check this article out and see if that fixes the issue: support.mobilemusthave.com/en/support/solutions/articles/67000729461-converting-wan-port-to-lan-port-and-back-to-wan If that doesn't work, reach back out to our support team and let them know and we can help you out with the next steps from there! Thank you!

Hello! So, the Fuse Block can be powered by that battery, but the correct gauge wire will depend on what you're planning to run off of the Fuse Block and how far away you'll be running the cables. We suggest checking with an electrician if you are unsure of the correct gauge wire you'll need. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! So, if you were just needing to bond connections from T-Mobile Home Internet, campground wifi and the occasional hotspot link, then the B One would be the perfect router for you! Speeds will ultimately depend on the signal it is able to pull in, but the B One can handle up to 1Gbps of throughput. If you were looking for the option of having a hotspot data plan as an internet option as well, I'd recommend the B One 5G: mobilemusthave.com/products/peplink-b-one-5g?_pos=2&_psq=b+one+5g&_ss=e&_v=1.0 Check that out and if you have any follow-up questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes, the Starlink dish does need to have a direct sight line to the sky. Starlink's signal is impacted by things like heavy tree coverage, so I feel like the rooftop tent would cause some issues with the interference as well. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes, the B One 5G does support Band N71! Here's a link to the datasheet with the full bands covered: original.accentuate.io/7253851734115/1714052834560/peplink_b_one_5g_datasheet.pdf?v=1714052834560

So, if you're just needing a 5G modem and not the router itself, I'd recommend looking at the BR1 Mini 5G, which does not have WIFI capabilities and can be tied into another router as a 5G modem. Here's a link to our site:mobilemusthave.com/products/peplink-max-br1-mini-5g-mobile-router?_pos=1&_psq=br1+mini+5g&_ss=e&_v=1.0 If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

thanks so much for that info!!!!!!!!

I just ordered the system! thanks

Yes, you can have your WAN connection as the primary with cellular acting as backup or you can also have them set up to load balance as well! If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes, all of the bonding happens between the Peplink router and SFC servers, then an extra (single) tunneled connection is made from the SFC Server to the SFC Relay. This does cause some higher latency due to the relay's location. If you have any other questions, feel free to reach out us via email at info@mobilemusthave.com and we'll be happy to help!

@@MobileMustHave also I’m assuming since SFC servers are in the mix I’m also going to pay for any data I stream with Netflix or whatever, with only 1 Tb a year on my plan this wouldn’t be a solution for me, I think this should’ve been mentioned in the video.

Hi David! So, the dish doesn't have a pitch to shed water, but it really isn't needed from what we're finding. Andy hasn't had any water collection issues while using his and we haven't heard any reports of this being an issue. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Yes, it can! The Fuse Block comes with an assortment of fuses, so will just want to make sure you use the right size fuse. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hi Frank! Thank you, glad the video was helpful for you! So, we don't sell any magnetic sheets on our site, but you should be able to easily find some options at a local hardware store. There aren't any specific requirements besides it just needs to be magnetic. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Thanks for reaching out! So, I compared the spec sheets for both of the antennas and the Parsec Falcon would be better than the Netgear. The Parsec Falcon can provide an antenna gain of up to 4db, while the Netgear 600451 can only provide a gain of up to 2.5db. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

@@MobileMustHave Thanks so much for this. Liked and subbed and belled.

Hello! Yes, Peplink routers will work in the UK with most models. You will want to confirm that the model of Peplink router that you choose has the correct bands for the UK. If you reach out to us via email at info@mobilemusthave.com, we can help you figure out which Peplink router would be perfect for you! I'll also note that our M-Series Data Plans will not work in the UK. They will work in the United States only.

Hello! I definitely get what you mean, but the Trio Flatmount may have an option that works with your glass panoramic roof. The Trio Flatmount offers suction cups as a mounting option and you can also add on the Pivot Legs to help with the curvature on your panoramic roof. It will ultimately depend on the strength of your glass roof and the amount of curvature, but it does seem like this option may work for you! If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

So, if you're looking to just waterproof the cable through the roof connection, our Cable Entry Solutions from Icotek will work for you: mobilemusthave.com/pages/cable-entry-systems If you are looking to waterproof the cable end after removing the dish, this would require a different cover of sorts. We don't currently offer a cable cap for this situation, but if you reach out to us via email at info@mobilemusthave.com, we can help guide you in the right direction! Thank you!

So, the B One 5G is only a single-modem, so technically it can't bond both SIM cards, but it would switch automatically to the backup SIM card if the main SIM loses service. It won't be exactly seamless though, because you will still have a little downtime as the router switches over to the backup SIM. It doesn't take long though for it to switch over. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! Nothing has been confirmed yet, so we can't say for sure. But if you're signed up for our emails, you'll be one of the first to know as we relay all new product releases through our email list! If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! So, you could definitely use the Peplink Slim 40G model to replace the Husky, but the Husky is a overall stronger antenna with a higher peak signal gain and it has the wifi extension connections, whereas the 40G only has cellular connections. The Slim 40G definitely has its perks though with being able to be interior-mounted and easily moved, if needed. Here's a link to it on our site:mobilemusthave.com/products/peplink-slim-dash-window-mount-antenna?_pos=1&_psq=slim+40&_ss=e&_v=1.0 Check that out and if you have any questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

That's great to hear! We'll be happy to help you with any questions you may have! You can contact us via email at info@mobilemusthave.com, through our chat box on our website or via phone here: mobilemusthave.com/pages/contact-us Whichever you prefer!

So, there are ways to remove the Starlink router completely from previous versions, but we don't have any firsthand experience with converting the Gen 3 yet, so we're waiting on more information and testing before we recommend a sure route to get rid of the Starlink router. But, from what I'm finding, most people who converted their previous Starlink models are not converting the Gen 3 and just using it with the Starlink router since it has ethernet ports already built-in. If you have any other questions, reach out via email at info@mobilemusthave.com and we'll be happy to help!

I'm sorry to hear you're having issues with your TST system. Fortunately, TST does have a 3 year warranty on their TPMS, so as long as it's under 3 years old, should still have a warranty on it according to their site:tsttruck.com/warranty#:~:text=TST%20TPMS%203%2DYEAR%20WARRANTY,a%20period%20of%20three%20years. If you purchased your TST TPMS system through us, you can also reach out to us via email at info@mobilemusthave.com and we can help you out!

133 is pretty high, but thankfully that is much higher than the average latency seen from Starlink. According to Starlink's spec sheet, the average latency is 25-60ms in fixed locations: www.starlink.com/legal/documents/DOC-1400-28829-70 If you have any other questions, reach out via email at info@mobilemusthave.com and we'll be happy to help!

Nope, you wouldn't need to do the backflush a 2nd time since it is just a rinse. You would just need to do the regen twice in this scenario. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we can help you out! Thank you!

That's a really good question. Unfortunately, FusionSIM is a hardware feature, so it would not be added with future firmware upgrades. We are hopeful for new Peplink routers to support FusionSIM in the future though. If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

@@MobileMustHave OK, thank you.

Hello! So, tree coverage can definitely cause an issue with Starlink's signal. Being able to move the dish around will definitely have its benefit with areas where your rig is parked underneath heavy tree coverage, but I will note though that the High-Performance Dish has a larger FOV, thus is capable of better performance in partially obstructed locations. If you have any other questions, please reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! So, we didn't notice any noise with the Trio Flatmount, but if this is something you're running into, it may be worth it to go with the SpeedMount version of the Trio mounts. The SpeedMount is specifically made for high-speed situations and has a lower footprint and possibly less drag. Here is a link to the SpeedMount on our site: mobilemusthave.com/products/trio-speedmount-for-starlink-gen-3?_pos=2&_psq=speedmount&_ss=e&_v=1.0 If you have any other questions reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! So, Peplink's similar equivalent to bridge mode is called Drop-In Mode and it is included with the B One 5G! Here's an article that goes over Drop-In Mode: forum.peplink.com/t/what-is-drop-in-mode/8592 If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! Sorry for the trouble on that. The brand we recommend is not sold on Amazon anymore, but there are several other reliable options on Amazon that are drinking water safe. For example, we'd recommend this bladder from Fischuel: shorturl.at/ouxV9 If you have any other questions, reach out to us via email at info@mobilemusthave.com and we'll be happy to help!

Hello! Thanks for reaching out! So, the unlimited data plan would depend on if you could get a hotspot data-only SIM card from your provider. If you have T-Mobile or Verizon Home Internet, it may not work directly, but you would have to confirm with them to know for sure. Alternatively, you can connect the home internet gateway to the Peplink router through the WAN port. This would allow you to bond the signal with another data plan installed in the Peplink router and a wireless connection through Wifi-as-WAN as well. Yes, as long as your antenna has SMA connections, it should work just fine! If you did need to upgrade your antenna, I'd recommend the Poynting XPOL Directional Antenna: mobilemusthave.com/products/xpol-2-5g-us-5g-600mhz-high-gain-cross-polarized-lte-mimo-antenna?_pos=1&_psq=directional&_ss=e&_v=1.0 Hope this helps! If you have any other questions, reach out via email at info@mobilemusthave.com and we'll be happy to help!