This is such an elegant design! Thank you for posting it. I have a sliding miter saw that's just always in the way, so making it into a cabinet that can double as a work surface or outfeed table for a table saw is going to be perfect.
Thank you so much brother! 💪 I really enjoy working with it. Especially not having a lot of space to work with, this is game changer! Are you going to build one too? If so what would you do different?
@@BarRookie Yep, I'm going to build one. The only thing I'm thinking about changing is putting adjustable feet on it, and maybe retractable casters so that I can fine adjust it to be an outfeed table for the table saw. Then I can also use the table saw as support for long board to cut with the miter saw...kind of a win win.
That looks ace, after looking at a few others in the tube, this is most probably the one I go for. One thing, do you have any plans you can post in the info? Thanks mate 👍🏻
Simple and very practical, well done. Are you still happy with the design or are there things that you would do differently now that you have used it? Groeten uit Nederland 👍
Actually, not really! It's so much fun working with it! I did add some things along the way. Like an outlet and some storage options. I might make a video about it if you like! 😊
@@BarRookie I would be interested to see that for sure. I ordered a machine and now I am looking for inspiration and ideas. I am also thinking about the idea of incorporating a small table saw or a router, or both, if I can find a way to make it work with the space that I have. So therefore I like the fold-able miter saw design. It would make the table also usable as a table saw or a router table.
Really great project! @barrookie Do you have any plans or sketches you can send me? Just to adapt my own setup, with your ideas as base. Thanks in advance!
Haha true! Drop your saw off the table once and you got the same! Taking care of your tools is always a must! It is a delight to work with this bench I must say!
Great project, the best I've seen so far, and so simple. I'll certainly be doing one similar for myself. Thank you.
Thanks brother! 😊 if you end up making one, please send me a picture! 😊😊
Very nice, I'll try to build one myself sometime.
You should brother! Please send me a pic when you're done!
What a great project, can't wait to start my own. Thanks
Do you have plans to possible extend the table some to add a shelf for a table saw?
WOW! Great idea! Thanks for sharing!
Thanks! The pleasure is mine! 😊
Great. Using your model, I'm going to make my own.
I appreciate you sharing your video.
My pleasure! If you're done building, feel free to send me some pic via mail or on IG 😉
A unique design ❤❤
Thanks! 😝🥰
That bench is awesome! Well done!
Thank you much! So awesome to work with too 😊😊
Great job!!
Thanks! Loving to work on this!
Very innovative. Nice job!!
This is such an elegant design! Thank you for posting it. I have a sliding miter saw that's just always in the way, so making it into a cabinet that can double as a work surface or outfeed table for a table saw is going to be perfect.
Thank you so much brother! 💪 I really enjoy working with it. Especially not having a lot of space to work with, this is game changer!
Are you going to build one too? If so what would you do different?
@@BarRookie Yep, I'm going to build one. The only thing I'm thinking about changing is putting adjustable feet on it, and maybe retractable casters so that I can fine adjust it to be an outfeed table for the table saw. Then I can also use the table saw as support for long board to cut with the miter saw...kind of a win win.
@tomsmith3045 sounds like a nice addition! 👌 please send me a picture once you are done! 😎
Great idea
Thank you so much! Its such a blast to work with! 😊😊
I'm mounting a DWS779. What's the model # of your saw so I can check the dimensional differences. Thanks!
Mine is a Sheppach HM216. You're Dewalt will probably a little bit bigger. Good luck! 🙂
supported by screws? .Is it for cutting?
Technically it is supported by screws yes, but it is very sturdy. Yes, I cut with thing all the time
Класс! Попробую сделать такой же!👍👍👍
That looks ace, after looking at a few others in the tube, this is most probably the one I go for.
One thing, do you have any plans you can post in the info?
Thanks mate 👍🏻
Thank you so much for the positive comment! :-)
I don't have any plans, but if you have any questions about something I'm happy to help!
Simple and very practical, well done. Are you still happy with the design or are there things that you would do differently now that you have used it? Groeten uit Nederland 👍
Actually, not really! It's so much fun working with it! I did add some things along the way. Like an outlet and some storage options. I might make a video about it if you like! 😊
@@BarRookie I would be interested to see that for sure. I ordered a machine and now I am looking for inspiration and ideas. I am also thinking about the idea of incorporating a small table saw or a router, or both, if I can find a way to make it work with the space that I have. So therefore I like the fold-able miter saw design. It would make the table also usable as a table saw or a router table.
Do you have plans?
Really great project! @barrookie Do you have any plans or sketches you can send me? Just to adapt my own setup, with your ideas as base. Thanks in advance!
An excellent video and a lovely looking bit of it. Somewhat beyond my skill level but nevertheless very nice :-) Well done sir :-)
Thank you so much my friend! I think everyone can do this to be honest 😉
Just a bit of courage en confidence and not trying to rush things 😊
Hello Bro🙏🏻💪🏻😁
Hi my friend! How are you? 💪
You drop that once when you are folding it down and it's going to destroy your saw.
Haha true! Drop your saw off the table once and you got the same!
Taking care of your tools is always a must! It is a delight to work with this bench I must say!