DON’T Build a Miter Station - Do THIS Instead

Поділитися
Вставка
  • Опубліковано 2 чер 2023
  • Build this quick and easy Miter Saw Auxiliary Fence! A great alternative for those who lack the money, time, or space for a full miter station.
    * Fully adjustable
    * Lots of configurations
    * Easy to set up and remove
    * Uses 1’ x 4’ material and a few pieces of easily obtainable hardware
    * Takes less than an hour to build!
    Our Patreon is free to join! / bustedknucklewoodworks
    Follow us on Instagram: / bustedknucklewoodworks
    Subscribe to our podcast: @TheNewCrankyWorkshop
    Parts used in the video: (NOT affiliate links)
    * Universal T-Track: www.rockler.com/universal-t-t...
    * #6 x 3/8” Flat Head Phillips Screws a.co/d/iX3LcdD
    * 1/4''-20 T-Bolts: www.rockler.com/t-slot-bolts-...
    * Easy-to-Grip 1'' Round Knobs, Female Thread: www.rockler.com/rockler-easy-...
    * Inline Stop for T-Track System: www.rockler.com/rockler-inlin...
    As usual, no sponsorship, endorsement, merchandise, or compensation was offered or accepted for the making of this video.
    The best source for royalty-free music for UA-cam: share.epidemicsound.com/k0ofgg
    #woodworking #mitersaw #diy #chopsaw #mitresaw #tools #mitersawstation #miterstation #mitersawfence #mitersawstand #mobilemitersaw #dewalt #dws779 #dws780
  • Навчання та стиль

КОМЕНТАРІ • 1 тис.

  • @BustedKnuckleWoodworks
    @BustedKnuckleWoodworks  2 місяці тому +3

    We just started a Patreon page. It's free to join! patreon.com/BustedKnuckleWoodworks

  • @rollingstone3017
    @rollingstone3017 Рік тому +151

    An alter to the saw 😂😂😂😅😊 Dang. That is too true!!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +9

      I know right?! I feel like I should be kneeling when using one!

    • @mikevandenboom5958
      @mikevandenboom5958 7 місяців тому +8

      That was a good one he made me laugh 😅

    • @j.r7872
      @j.r7872 7 місяців тому +1

      Ha!!!

    • @bunkie2100
      @bunkie2100 4 місяці тому +1

      @@j.r7872 What do you call it when you alter the altar? An Altaration? ;-)

    • @rubenb.molina6968
      @rubenb.molina6968 4 місяці тому +1

      "or a darn cathedral..." 😂😅 I am laughing so much. I couldn't pin point what was about those builds that I didn't like. This just about describes it. Brilliant!

  • @kennywilson6159
    @kennywilson6159 4 місяці тому +26

    Duuuude. What a great idea. I'm in the middle of setting up my brand new shop and was just about to begin the work on the "alter". This allows me to reconsider where I put the saw and will give more room in my little shop. I LOVE YOU MAN

  • @BustedKnuckleWoodworks
    @BustedKnuckleWoodworks  Рік тому +12

    Check out our new podcast! www.youtube.com/@TheNewCrankyWorkshop

  • @zendell37
    @zendell37 11 місяців тому +9

    Love it. It's not an idea I've seen done, redone, resold, repackaged, or copy/pasted from every other wood tuber. Thanks!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +1

      Yeah, that “copy/paste” thing is getting out of hand on UA-cam. We are talking about that on our next podcast, you should check that out 😁👍

  • @Artzandcatz
    @Artzandcatz 4 місяці тому +7

    I am so happy UA-cam suggested your channel! I’m in stitches! 😂😂 learning a lot just from the one and a half videos I’ve watched! Thank you!

  • @hjboots
    @hjboots Рік тому +5

    Excellent narration and video, love the way it is so easy to build and a plus for my Dewalt miter saw. Thank you for sharing.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      Get busy and start building this first, then build a whole bunch of other stuff! 👍

  • @pato6334
    @pato6334 Рік тому +13

    Fabulous video! I just put my saw on a new rolling table and I need a take down fence cause I’m not building a shrine for it either. This is a great help for the saw and will also help in my ongoing ( and largely unsuccessful ) attempt to reduce profanity.

  • @bunnyultima1875
    @bunnyultima1875 Рік тому +19

    Back when I worked in a lumber mill, the chop saw stations would have metal rails extended out up to 20 feet that were designed with slots cut into them every other inch (each stopper had a spot the screw in a spacer to reach the in-between inch) that you'd slide stoppers into. They were designed to be easily pushed out of the way (the slot was on the left corner and went about halfway through the rail) so you could reach the longer cuts, and could effectively have multiple cut stops setup on one rail. This let us pump out bulk cuts of graded lumber quickly and meet order quotas. Not really a concept I've seen anyone adapt to a miter station, yet.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      Interesting 🤔 I can kinda picture it working on a smaller scale like this.

    • @bunnyultima1875
      @bunnyultima1875 Рік тому +3

      @@BustedKnuckleWoodworks Yeah, the stoppers were weighted at the bottom too, that way they could be pushed aside and the board could sit fully flush along the rail up to it's cut point. The rail itself had a slotted side and a smooth side, we would run the board down the smooth side then shift it over to the left and seating the end of the board against the desired stopper and all the other stoppers along the way get tilted over out of the way until the board is dropped after the cut, then they just swing back into place.

    • @ohiowalnut
      @ohiowalnut Рік тому +14

      @@bunnyultima1875 I need pictures and video

    • @Trapper_Creek_2024
      @Trapper_Creek_2024 8 місяців тому +3

      @@ohiowalnut
      … or, at least drawings 🤔

  • @hkbondar
    @hkbondar 11 місяців тому +29

    Lee, I just came across your channel with this video and love your vibe -- so funny, practical, and self-deprecating (busted knuckles indeed). The part in this video where you talked about the "giant altar to a saw ... I just want to cut with it, not pray to it" -- that earned you a new subscriber right there. And the black-and-white Frankenstein sequence was great too. I'm going to my shop to build this fence for my Bosch 12" glider right now. Thanks for the wonderful content and keep going!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +3

      Lol can you believe, over 70,000 views and you are the FIRST person to comment on the Young Frankenstein reference! 😂 (Geez 🙄 I even used the exact lines from the movie). That deserves some kind of prize! 🏆

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +1

      P.S. I posted this comment to my FB story, too good 👍

    • @hkbondar
      @hkbondar 11 місяців тому +1

      @@BustedKnuckleWoodworks ❤ ... thanks for the trophy :) I hope you keep making this great content, Lee, it's very creative and fun!

    • @pamcadd8658
      @pamcadd8658 10 місяців тому +2

      Hey, ya beat me to it - was just coming to the comments to say the same thing to Lee! Hilarious, practical, simple.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  10 місяців тому +1

      @@pamcadd8658 I will take a kind compliment like that anytime. Thank you 🙏

  • @brianwaites4572
    @brianwaites4572 5 місяців тому +1

    Good lad! Best and most practical set-up for a mobile mitre-saw on UA-cam. I’ll make mine tomorrow. Thank you, my Dewalt will love me.🏴󠁧󠁢󠁥󠁮󠁧󠁿

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  5 місяців тому

      After you make this, check out the Part 2 video I just released for this 😊

    • @brianwaites4572
      @brianwaites4572 5 місяців тому

      @@BustedKnuckleWoodworks Lovely……I’ll check it out.👍

  • @jboulware
    @jboulware 8 місяців тому +14

    THANKS SO MUCH! I just made this exactly according to the video, and it is awesome! I've always hated my miter saw, but didn't have the room/patience/need to build a shrine, this is the exact happy medium I've been looking for to actually enjoy using the stupid thing. Some outfeed supports might be in my future, but so far so good! Simple idea, but I never wouldn't have thought of it myself. You rock man.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  8 місяців тому +2

      Oh man that is awesome 👏 so glad it’s working for you! Happy miter-ing! 😃

  • @davidpeters8813
    @davidpeters8813 11 місяців тому +21

    Good build and entertaining video. On my miter station/altar 🤣 I put t-track in the table surface for a stop block. With a long fence like this, if you have a warped board to cut, the fence can push it away from the middle leading to kickback. The fence in the saw is sufficient for that and a stop block on the table surface gives that option for repeated cuts. Just something to consider. Keep up the great videos!

  • @FormerlyKnownAsAndrew
    @FormerlyKnownAsAndrew 4 місяці тому +7

    You saved me from building a whole goddamn cathedral. I was about to start this project tomorrow.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  4 місяці тому +2

      The more people I can save from these monstrosities, the better! 👏

  • @Hoochiemamawrangler
    @Hoochiemamawrangler 11 місяців тому +1

    I, too, have my miter saw on a mobile cart and this is just the solution I need and will definitely be building. Thank you for doing the thinking for me.

  • @3frogltd987
    @3frogltd987 3 місяці тому +1

    Love your sense of humor, your "altar for the saw" comment is a classic! I too am space challenged after 20 yrs still can't convince my wife that her car needs to live outdoors. 😂. Your fence idea will guide me when I reconfigure my miter saw stand.

  • @jeffreyvanhorn1996
    @jeffreyvanhorn1996 9 місяців тому +3

    This was enjoyable beyond words.
    And a GREAT idea!
    Thoroughly entertaining, informative, and practical.
    We need more people with a brilliant sense of humor like this.
    Thank you!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  9 місяців тому

      Wow, thank you! It’s comments like this that motivate small channels like mine to keep grinding it out 💪

  • @jimbo2629
    @jimbo2629 Рік тому +5

    Having an extra fence helps when you are cutting to a depth rather than all the way through the wood. Otherwise you don’t get the same depth across the wood. Don’t make the fence too tall. It can reduce the plunge depth.
    Exellent video.

  • @G.I.JeffsWorkbench
    @G.I.JeffsWorkbench 8 днів тому

    Thanks Lee for the details on building a practical miter saw fence. I’ve been thinking about this for years, but haven’t built it, for the reasons you described. Now that I’ve seen your way of adjusting the fence left and right i will finally build one. I like the way you embedded the t track low in front, instead of on top. The in line stop looks perfect (I didn’t know they existed). Much better than a flip down stop for this purpose, IMHO. No need to size the width of your fence to the length of your flip stop. I also like the way that the fence attaches to the saw. I don’t always want the fence attached, so this design is ideal. Thanks too for the reminder to wear a mask when cutting MDF. That stuff makes a lot of very fine dust that no one wants in their lungs. All this to say thanks from your newest subscriber.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  4 дні тому

      Yeah, a flip-stop is ridiculous for this sort of thing. This method lets you build a really skinny or tall fence, according to your needs or what you have on hand. And the ability to remove it is great also, since I move mine around a lot!

  • @BubbasDad
    @BubbasDad Рік тому +2

    Great idea! When I bought my Dewalt Miter saw, it was the holiday season and the miter saw stand was included. The stand works great, but this will be a great addition.

  • @carguy1312
    @carguy1312 4 місяці тому +4

    The commentary while trying to attach a board to the fence is all of us.

  • @Azalraku
    @Azalraku Рік тому +5

    You just made my miter saw a lot more friendly. Thank you for the great idea!

  • @cb50076
    @cb50076 7 місяців тому +1

    Thank you! I'm new to woodworking and I don't have the space to build the "Cathedral" for my Miter saw or any of my other tools. So I've settled for trying to build sturdy mobile carts. You idea has definitely solved my miter saw problem. Thank you..

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  7 місяців тому

      My pleasure! Glad it was helpful. I’ll keep bringing the tips 👍

  • @JasonGrissom
    @JasonGrissom Рік тому +2

    I had no interest in anything miter saw (I don't own one anymore) but I'm so glad I clicked on the video. Super fun and entertaining video Lee. And a super simple and effective build. Thanks for sharing!

  • @tonymarlow4468
    @tonymarlow4468 11 місяців тому +9

    Great video. I make picture frames and this jig solved the problem of making all my cuts the same length. Thank you for making awesome content that is easy to follow. Best regards.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +1

      I’m so glad 😃 this helped you out!

    • @rdot980
      @rdot980 11 місяців тому +1

      Isn't a table saw more accurate for picture frame work?

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому

      @@rdot980 I think that depends on the size of the frame, the size of your saw, and how accurate your miter gauge is. I’ve made a lot of nice frames with both tools.

  • @daverothwell4579
    @daverothwell4579 Рік тому +3

    Brilliant idea! I have a very small shop so this is going to help me tremendously!! Thanks so much for this video. Time to hit the subscribe button. 😁

  • @redtelle85
    @redtelle85 8 місяців тому +1

    This is an AMAZING idea that I can't believe I haven't seen sooner! I know I'll be implementing this right away for my Bosch!

  • @HrMicMan
    @HrMicMan 11 місяців тому +1

    Genius, i'm glad i stumbled across this video, was planing for a major setup, but this release so much space. Thank you for sharing.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +1

      You’re welcome! Thanks for the visit! I hope this works well for you, it does great for me 👍

  • @ratofvengence
    @ratofvengence Рік тому +5

    Great idea, I was actually on here researching table setups for miter saws. I think I'll do this instead! Thanks :)

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      Definitely worth a try, if you decide to go with the station later you aren't out anything except the materials, which are pretty cheap.

  • @sivacrom
    @sivacrom Рік тому +8

    I love this. A mod I can think of right away that I would make is to put a couple of pieces of ¼" hardboard perpendicular to the fence away from the saw to help support long pieces. I can't tell you how many times I've needed support on long pieces...

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +2

      This stand has extensions for support so I didn’t need that, but definitely could do that if there was a need 👍. Thanks for the idea 💡!

    • @wooddogg8
      @wooddogg8 11 місяців тому +2

      That IS a good idea. I almost bought a stand with my saw, but my shop is so small I want to build a table with storage beneath. This fence system with longer piece support would work great! Thanks for the ideas, both of you!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому

      @@wooddogg8 you’re welcome!

  • @warpacademy
    @warpacademy 8 місяців тому +1

    Fantastic video. Love all the extra effort you put into it. The humor really makes it stand out.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  8 місяців тому

      Aw thanks man, so happy you appreciated that. Definitely worked hard on this one!

  • @JustinShaedo
    @JustinShaedo 8 місяців тому +1

    This is great. I hope you had as much fun making it, as I did watching it.
    Greetings from Australia.

  • @grievous23_
    @grievous23_ 4 місяці тому +3

    Great idea, one useful add-on would be using the t track on the backside to hold some custom piece of material perpendicular to the fence and create an adjustable support for long pieces

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  4 місяці тому

      Watch part 2 of this video, where I do exactly that! 😁 ua-cam.com/video/aZWcFabXnGk/v-deo.html

  • @marcwilson564
    @marcwilson564 5 місяців тому +3

    "I want to use my mitre saw, not pray to it!" Love it!

  • @shaynesabala
    @shaynesabala Рік тому +1

    Thank you. I have the same saw and not ready to build a saw station. This will work perfectly, and I can even add most parts to my saw station when I build it.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому

      For sure, this will get you by for quite a while, so you can take your time when you build your station.

  • @rossnichelson6322
    @rossnichelson6322 Рік тому +2

    Great idea. Love the simplicity. I'll definatly use this.

  • @camhutchison5553
    @camhutchison5553 Рік тому +12

    I would make an L bracket that attaches to the t-track at the far end of the fence running on the back and under the fence giving you some support for long pieces at the far end. As it would ride on the track, it could be moved to whatever position that is the end of your piece.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      That’s a really good idea. I can’t think of anything already existing that would work like that but you could certainly make something suitable I would assume.

    • @sivacrom
      @sivacrom Рік тому +2

      I *just* posted a comment saying the exact same thing. Great minds...

    • @jeffranck6080
      @jeffranck6080 Рік тому +1

      I was just thinking of how to support long pieces. This is a great idea. I could also think of building the fence in an L configuration with a bottom that lines up with the bed of the miter saw. I think that would work because it seems that you would mount the fence pretty much in the same place each time you use them.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      @@jeffranck6080 another excellent mod. Be sure to account for the gap you need for miter cuts though

  • @wooddogg8
    @wooddogg8 10 місяців тому +4

    Just getting started on my Miter saw station. It'll have cabinets beneath so moving into the alter range. But I'm definatelty incorporating your t-track stop Idea, but maybe on the bench (cabinet tops) instead of a long fence.. fantastic for repeatable cuts. I may actually try using bench dogs, the adjustable kind, so My benchtop doesn't have a long fence running through it. Just running through ideas. Time to start building!!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  10 місяців тому

      I think the “altar” route is fine if you have the time, the space, and the money to build one. The thing about it his fence is that it can work for anyone, regardless of those considerations. And as you point out, you can certainly adapt the concept within a larger build as well.

  • @alexreid4131
    @alexreid4131 4 місяці тому

    Brilliant! Been putting off building a miter saw station for ages. Now I can put it off indefinitely. Thanks 🙏

  • @peterrudholmbalmaceda3274
    @peterrudholmbalmaceda3274 3 місяці тому +2

    Haha, I love it! I've been struggling with how to set up and place my unwieldy miter saw in my shop, because it eats up so much space, front to back and side to side. And I really don't want to build a shrine/alter for it either. So you gave me a great idea! Thumbs up!

  • @BustedKnuckleWoodworks
    @BustedKnuckleWoodworks  5 місяців тому +13

    Catch Part 2 of this video, with lots of updates and improvements suggested by our viewers! ua-cam.com/video/aZWcFabXnGk/v-deo.html

  • @fredparsons5134
    @fredparsons5134 Рік тому +3

    Excellent idea Lee. I need something like this as I have no desire for a workstation for my saw. Just a miter saw stand like yours. I’m going to build this. Also I lucked out on another miter saw video that I’m going to use by Inspire Woodworking that has a great idea for dust collection that is a simple modification. You might want to check it out also.

  • @jamesbarros950
    @jamesbarros950 8 місяців тому

    This is fantastic! I recently gave away my skill saw for this reason. Time to get another. Bravo!!!

  • @DaveHively
    @DaveHively Рік тому +2

    Simple, excellent ideas are almost always the best solutions. Great job!!!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      I try not to overthink things. In fact, I usually underthink most things 😆

  • @ACAB_Media
    @ACAB_Media 10 місяців тому +3

    Great idea! ... I decided to just build it with dovetail grooves and use MicroJig Matchfit style hardware (3D printed) to both save money on buying T-track and not have to worry about ever cutting through the track. Works great! Thanks!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  10 місяців тому +1

      Love it! Quite a few others here in the comments have mentioned doing the same. I think it’s a great idea!

  • @danielorr2972
    @danielorr2972 4 місяці тому +1

    Thanks for this ingenious but simple solution to an age old problem ! Will make this system for my miter saw asap!

  • @rickcimino5483
    @rickcimino5483 Рік тому +1

    I don't know how the YT algorithm brought me to your channel but I'm sure glad it did. Your i intro was hilarious. Miter saw altar....I love it. Subbed.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому

      Glad to have you here! I do not claim to understand the mysteries of the Almighty Algorithm myself but when it works it works! 😊

  • @78tag
    @78tag 7 місяців тому +1

    "I didn't want to set up an alter" - EXACTLY! Great video, thanks.

  • @uglysweaterhq5252
    @uglysweaterhq5252 4 місяці тому +1

    This is great. As someone who puts his miter saw away everyday this is a pretty helpful solution. Subscribed.

  • @Xcal2390
    @Xcal2390 Рік тому +2

    Love the idea. Have the T-track laying around and def will be building this. Would also work well with a slotted cut in the event someone doesn't have t-track laying around.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      For sure, if you have the right bit a slotted cut would work. Not sure how well MDF would hold up, but hardwood would be fine

  • @AlsInd
    @AlsInd 5 місяців тому +1

    i have a station in my barn but i really like this. it is a lot more convenient to be able to have the saw close to where i am building and this way the saw will be portable. i am definitely going to have to make one of these thanks for a great idea and short to the point vid 🙂

  • @troyporter3825
    @troyporter3825 8 місяців тому +2

    not even 2 minutes in yet and i had to subscribe...hilarious! looking forward to the rest of the video :)

  • @robynpecot-thompson7617
    @robynpecot-thompson7617 11 місяців тому +1

    Thank you. I am making the Miter Rails today. I am a disabled vet in Killeen and working slowly but this is a wonderful idea and just what I needed. I will be watching you for more wonderful ideas. I think you are hilarious also. God Bless

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому +1

      I was just at the Home Depot in Killeen last weekend 😁 Thanks for tuning in, and thank you for your service 🫡

  • @Techreux
    @Techreux 7 місяців тому +1

    Great video. Short, to the point, and great enthusiasm. I probably differ from you.. I LOVE having a built in tape measure on my Miter saw's stop side. For as seldom as I need to shift it, it saves me minutes that I can really use at other points in the job. I do like your idea of T-track stop positioning on the outfeed side.. very ingenious. The only thing I would caution.. is that MDF tends to bend more easily.. necessitating careful feeding to avoid tolerance issues ( yes, this really did happen to me - once..), so, a bottom or back stiffening rib board is in order.. you could make your T-track match up with that nicely.. and help prevent the board from sagging or changing over time. LOVE the "altar", haha.. I REFUSE to waste my shop time (and funds) on a project like that that just ends up becoming a place for junk to stack up on.. The router table and table saw get enough junk as it is..

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  7 місяців тому +1

      I’ve used this setup for a long time and find having the two t-tracks keeps the fence pretty stable. Totally agree on the “altar” thing though 😁

  • @SteinerHaus
    @SteinerHaus 10 місяців тому +1

    This is a neat and dead simple solution to a problem that I'm pondering. Thanks. And BTW great performance over all. I like the presentation's lack of formality.

  • @johnjackson5467
    @johnjackson5467 10 місяців тому +1

    Great idea! I was planning to build a miter saw station but I'll try this first. Thanks for the great idea.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  10 місяців тому

      Yeah no harm in giving it a shot, lots of people here telling me it’s exactly what they needed

  • @tombrown6584
    @tombrown6584 5 місяців тому +1

    That's awesome, I have the same issue, I will be using this on my saw. Well done!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  5 місяців тому

      Thanks! I just did a follow up vid with lots of improvements, be sure to check that one too :)

  • @j.r7872
    @j.r7872 7 місяців тому +2

    Excellent!
    Thank you for sharing!

  • @williamfertenbaugh7940
    @williamfertenbaugh7940 4 місяці тому +1

    That is pretty slick snd useful yet simple!

  • @JosuRibeiro
    @JosuRibeiro 4 місяці тому +1

    best woodworking youtube channel out there, very entertaining and informative!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  4 місяці тому

      Wow, thanks for the kind words, I really appreciate it. 🤗 Don’t forget to check out Part 2 of this video if you haven’t already! ua-cam.com/video/aZWcFabXnGk/v-deo.html

  • @jessegarrett6343
    @jessegarrett6343 Місяць тому

    Well I'm gonna be building this this weekend! I've been meaning to make a fence for my miter saw, and this looks practical and simple.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Місяць тому

      It definitely is! Make sure to watch the follow up to this video, lots more good ideas to add to this

  • @AngieWilliamsDesigns
    @AngieWilliamsDesigns 3 місяці тому +1

    Great idea. I’ve started building my shop cabinets. It started as a miter station. But I hated the idea of building the cabinets around a tool that I actually don’t use as much as my other tools. I actually started back in June by dismantling my old miter station. I had to quit with the build after a back injury. Just started up again by starting with the uppers. But one thing I noticed was that…. I haven’t even used my miter saw since June. So I actually sold my old miter saw and plan to buy a new one. One that is much smaller and light weight. I’m still going to put the miter saw on my shop cabinets. But… not building an “altar” to it. Love your video. This was entertaining but also provided a great alternative. I have my brothers miter saw upstairs above my shop where I store lumber. I may have to build this for that saw.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  3 місяці тому

      Definitely you should give this build a try and see if it works for you. I don’t use mine all that much either, which makes this a great alternative to an “altar.” Keeps the saw portable too, which is another great advantage.

  • @privateperson7312
    @privateperson7312 8 місяців тому +1

    I enjoy practical problem solving like this. Thanks for the video. I hope to make it some day.

  • @dennisholtby2140
    @dennisholtby2140 7 місяців тому +1

    Love it! Added this to my miter saw about a week ago and absolutely love it Thanks!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  7 місяців тому

      That is awesome! Thanks for sharing that, l love knowing that this was useful

  • @eggsngritstn
    @eggsngritstn Рік тому +1

    Great idea. I have a sacrificial fence of MDF on my miter saw that's handy for short repeatable cuts. This is a better solution for longer pieces. Thanks!

  • @adhamgreen33
    @adhamgreen33 5 місяців тому

    Such a great setup for small work areas!!! Love these simple genius ideas

  • @martinfallon7269
    @martinfallon7269 11 місяців тому +1

    Love it!! I’m a new woodworker loving it and this awesome. I’m just in a small garage so it great.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому

      Awesome! So happy to have you here in the community! You will love woodworking (when you're not actually hating it LOL)

  • @leenmonster1528
    @leenmonster1528 3 місяці тому +1

    I like the simplicity!! Thanks for sharing.

  • @matthewrentz3427
    @matthewrentz3427 8 місяців тому +1

    Wow this is like a big tv show production. Very entertaining and well put together.

  • @MaddMaxxWoodWorks
    @MaddMaxxWoodWorks Місяць тому

    I like it Lee. Easy and quick. Thank you

  • @jbocaneg17611
    @jbocaneg17611 Рік тому +1

    Just awesome. I will certainly be building this fence. Thank you!

  • @BostLabs
    @BostLabs Рік тому +1

    Yes! I like it. my setup is close to yours so I can see this working well for me. Thanks for sharing!

  • @adamrossier5167
    @adamrossier5167 4 місяці тому +1

    I have no intention of building an alter to my job site/shop chopper… So this is a fantastic and portable! Thanks

  • @rjh6380
    @rjh6380 10 місяців тому +1

    I like your format. Great sense of humor Lee and nice idea for a guide.

  • @UpNorthHandyman
    @UpNorthHandyman 11 місяців тому +1

    This is an awesome idea man, GREAT alternative to a miter station. Functional and a heck of a lot cheaper to build.👍

  • @fudpukker
    @fudpukker Рік тому +1

    Nice, simple, cheap, straightforward. Thanks...

  • @lauramarshall6376
    @lauramarshall6376 Місяць тому

    This is EXACTLY what I was looking for. I have my miter saw on a folding stand, so I can easily move it out of the way. I have no room for an altar to it. But ... I needed a longer fence ... and this is perfect. Thanks for the great video.

  • @rollthers3157
    @rollthers3157 Рік тому +1

    Fantastic job Lee!

  • @MovingToMnPro
    @MovingToMnPro 11 місяців тому +2

    This is awesome. One thing that could make it even faster and easier depending on the saw, is having an extra set of upper fences.

  • @williamolsen8517
    @williamolsen8517 2 місяці тому +1

    Thanks Lee, outstanding and I’m going to build one. Great production.

  • @motsy15
    @motsy15 Рік тому +2

    Most entertaining video I’ve seen in a while. Great idea too. My miter saw has been lonely for some time now, but this fence might do the trick!

  • @jimbalz3017
    @jimbalz3017 4 місяці тому +1

    "an altar for a saw" -- that metaphor is absolutely spot on!

  • @jmwoodworking
    @jmwoodworking 5 місяців тому +1

    Awesome Sauce! I've been looking for a solution like this! Thanks for the vid!

  • @anonymoususer4356
    @anonymoususer4356 2 місяці тому

    Excellent production quality. Great sense of humor!

  • @lureup9973
    @lureup9973 10 місяців тому +1

    You my friend are a joy to watch, great stuff!

  • @kyungrix1112
    @kyungrix1112 3 місяці тому

    Dude, I just discovered your videos and I really like them! I like this fence idea. I wanted to build one of those cool miter saw stations but I don't build much or very often so having a removable and easily storable fence will work out so much better for me. thanks!

  • @bobvanwest
    @bobvanwest 7 місяців тому +1

    If I had to use a saw stand, I think I would build something like this. Thanks for this video, it is helpful to see what other makers are doing. Cheers

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  7 місяців тому

      Yep, I move that saw around a lot so this is handier than a big altar!

  • @donmiller8712
    @donmiller8712 Місяць тому

    Good video. I do like having my miter saw flush with my bench - not an alter, but practical. I am going to be adding an extended fence such as you describe in your video. Thanks!

  • @POOKIE5592
    @POOKIE5592 8 місяців тому

    Nicely done!

  • @lazygardens
    @lazygardens Рік тому +1

    That's ingenious! That and some in and outfeed supports is all you need.
    I love the altar.

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому

      I love altars too, as long as they remain in church and not in my shop haha 😆

  • @stanhilinski7280
    @stanhilinski7280 23 дні тому

    When I saw your cover picture, a light bulb went on. I don’t have this saw, but i have other uses. You’ve made a portable t-track! I can attach this to my work table, my table saw, etc and put clamps and stop blocks wherever I need them! Good job.

  • @cockerjc
    @cockerjc 7 місяців тому +1

    Well done! Great Presentation! Great Instruction!

  • @thisislifesong313
    @thisislifesong313 4 місяці тому +1

    Absolutely BRILLIANT!!! (and from one video maker to another, I LOVE the production!). Thanks!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  4 місяці тому

      I’m no video expert, I just try real hard. Thanks 🙏 for noticing! 🙂

  • @norm5785
    @norm5785 10 місяців тому +1

    Very useful upgrade thank you for sharing. Everyone stay safe, happy and healthy. From Henrico County Virginia

  • @MajorUpgrade
    @MajorUpgrade Рік тому +1

    Brilliant 😂. I have seen these "shrines" to chop saws too and it doesn't really make sense in my garage shop with limited space... I might do something similar. Thanks for the idea!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  Рік тому +1

      Exactly! This is for all of us small guys 👍

    • @MajorUpgrade
      @MajorUpgrade Рік тому +1

      @@BustedKnuckleWoodworks As a woodworking newb, I need all the help I can get, man. Practical, inexpensive solutions that make sense and just work.

  • @Buckdeplorable
    @Buckdeplorable 3 місяці тому +1

    Outstanding!
    No Miter Saw Alter for me.
    Thanks.

  • @ahorton6786
    @ahorton6786 2 місяці тому

    Hello from the UK, great idea, I'll be having a go this weekend!

  • @SomeSkillStudio
    @SomeSkillStudio 11 місяців тому +1

    Awesome build! And it was nice to meet you today!

    • @BustedKnuckleWoodworks
      @BustedKnuckleWoodworks  11 місяців тому

      Thanks! Nice meeting you as well! Love me some Rebel Cheese 😋 am I right?

  • @random_life_videos
    @random_life_videos 11 місяців тому +1

    I am going to try and build this. Thanks for the idea!!

  • @TroIIingThemSoftly
    @TroIIingThemSoftly 5 місяців тому +2

    I pray to my miter saw every night. All praises to the miter saw!