I tried everything including resetting to the factory settings,...and still it would not connect. Then, i saw a comment in a LG forum about hitting the lower back right side of the TV (looking at the back of TV) with a rubber mallet...i didn't have a mallet, so i used my hand,.....and Holy cow, it worked!!
If you unplug the TV and hold down the power button for 10 seconds the capacitors will be drained. No need to wait 10 additional minutes. Also, a power strip is more than capable of handling the ~100 watts needed for a TV. If it's not it's probably a surge protector strip that has failed from being hit with a surge and it needs to be replaced. Never plug sensitive and expensive electronics directly into an outlet.
Thank you very much - first step worked for me and also connected to the polk speaker, which had never happened despite seeking help from both polk and lg
Some LG TVs don't connect to an open wi fi network (without weap3 weas security features) and this could be a problem. Is it possible to prevent that by modifying the settings in order that TV can connects to an open wifi network also?
Thank you, the step that worked for me was to unplug the TV, press the power button for 30 seconds, wait a minimum of 10 min and plug the TV directly into the wall socket.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I tried everything including resetting to the factory settings,...and still it would not connect. Then, i saw a comment in a LG forum about hitting the lower back right side of the TV (looking at the back of TV) with a rubber mallet...i didn't have a mallet, so i used my hand,.....and Holy cow, it worked!!
The 1st suggestion worked! Thank you!
Thanks Sir, the DNS change worked for me!
If you unplug the TV and hold down the power button for 10 seconds the capacitors will be drained. No need to wait 10 additional minutes. Also, a power strip is more than capable of handling the ~100 watts needed for a TV. If it's not it's probably a surge protector strip that has failed from being hit with a surge and it needs to be replaced. Never plug sensitive and expensive electronics directly into an outlet.
Thank you very much - first step worked for me and also connected to the polk speaker, which had never happened despite seeking help from both polk and lg
Thank you! Changing DNS worked for me
Many thanks, it worked by changing the DNS.
Thank you, its help for me, #1
Lg smart tv won't highlight advance wifi, what can I do ?
Hi how did you fix this problem
The same. It’s not highlighted.
@@kelebogilemohlotlhe7103 I fixed mine. Reset everything, after resetting it gets highlighted.I have to type accounts passwords after resetting.
Thank you. The third way worked for me.
Thanks so much! Unplugging and plugging directly to the wall worked!!!!❤❤
Hey, the Advanced network settings is greyed out? And the last suggestion - if we are not connected to the internet, how can we download an upgrade?
Some LG TVs don't connect to an open wi fi network (without weap3 weas security features) and this could be a problem. Is it possible to prevent that by modifying the settings in order that TV can connects to an open wifi network also?
1st one worked.✅
Thank you, the step that worked for me was to unplug the TV, press the power button for 30 seconds, wait a minimum of 10 min and plug the TV directly into the wall socket.
My TV's still not picking up any Wi-Fi signal after all those steps
My did not work with any of them
I cannot load apps on my tv to get tv code
Mine didn’t work
It can connect to Wi-Fi after I disconnect it can decide not to connect again sometimes even if I put password it won’t connect
So did you have to get another tv or you found another way to connect it
It’s Wi-Fi modules I changed now it’s working perfectly thnx
@@Beendawa How did you change the Wi-Fi modules
Tv repair service
yeah I've been having this problem for a while I'll be the last time I ever buy anything LG