How to Replace Front Calipers 2004-08 Ford F150
Вставка
- Опубліковано 19 лип 2024
- Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABCR00097
A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This video shows you how to a (front/rear)brake caliper on your 2004-2008 Ford F150.
• Check here for more videos on the 2004-08 Ford F-150: • Ford F-150 2004-08 11t...
This process should be similar on the following vehicles:
2004 Ford F150 Truck
2005 Ford F150 Truck
2006 Ford F150 Truck
2007 Ford F150 Truck
2008 Ford F150 Truck
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oc/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 14mm Socket 1aau.to/oa/1AXAA00015
• Hose Pinch-Off Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Ratchet 1aau.to/ob/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Liquid Thread Locker
• Rust Penetrant
• Drain Pan 1aau.to/oa/1AXAA00320
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford F-150 2004-08 11th Generation: • Ford F-150 2004-08 11t...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Seeing people have the best tools that make the job so much easier makes me so bitter about being hunched over in the cold with old Craftsmen wrenches on an asphalt driveway smashing my knuckles on my strut towers
Thanks for making the video tho lol
Same 😂
No kidding. Air tools should not be in demo. Easy to figure out but if it's still a 15 year old OEM caliper bracket, it's a BEAR to get bolts broken loose.
I replaced my old brake pads. Then I began applying my C clamps to the caliber, when I heard a pop. The brake fluid began leaking out all over the floor. I realized that I forgot to remove the brake fluid reservoir cap inside the engine before pushing the caliper back in.
Awesome video - was doing the brakes on my truck and realized midway through that a caliper piston was damaged and leaking - was able to fix it tonight and continue with all the brakes around the truck thanks to this video !
One of the best videos on repair and replace. Great job. Thank you. 😊
Very informative, thank you. I am single and have nobody to pump the brakes so I'm waiting for a bleeding kit with the vacuum pump. I have all the other parts and it's frustrating. Go Bucs!
Well done video 👍🏼, thanks for the help!
Outstanding video. Thanks.
Thank you simple and to the point. Helped a lot
Great video. On point narrative. Thanks.
Excellent video, no bs, cuts to the chase
Great video. To the point. No BS. Gives all necessary information. If you cannot complete this by this video, go back to sleep.
+@rossspinosa1128 Thanks for the feedback! 1aau.to/m/Shop-TRQ
Great vid! 👌🏽
Does the pin with the rubber boot or whatever on it go in the top or bottom hole?
Ya I've changed breaks on many Ford's but never my f150. My 05 f150 wouldn't come off. The caliber was not moving an inch. I've never needed to take off the fluid line before so I wasn't going to start now considering my pads where 50% but still don't know why I couldn't get them off
Well done.
Great video, wish I would have not called anyone to come and help.
Helped a lot!
+Dennys Ojeda Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks l learn a lots because l forget to bleed them thanks again
Does it matter which side the slides go in one has a rubber anti-vibration on it and the other doesn't
Really good video. No 🐂 💩. I like it.
Good video, nice tips along the way. Wish it provided tool-socket sizes so that I could prep before laying out the job.
I’m asking before watching the video but why does it come with 2 copper rings I didn’t look when I took it off to see how it was on there
One on the inside of the banjo bolt one on the outside
"Flippy doo"
I always like to know that even pros use the terms I do. “This little dilly here” “tighten this daddy down”.
Don't veer off course in your veericle.
I replaced my old brake pads. Then I began applying my C clamps to the caliber, when I heard a pop. The brake fluid began leaking out all over the floor. I realized that I forgot to remove the brake fluid reservoir cap inside the engine before pushing the caliper back in.