2009 - 2012 Dodge Ram Backup Camera Install

Поділитися
Вставка
  • Опубліковано 19 жов 2024

КОМЕНТАРІ • 25

  • @ProvoBeastAudio
    @ProvoBeastAudio  2 роки тому +2

    Parts used linked in the description of the video!

  • @nofi5469
    @nofi5469 Рік тому +3

    Bro badass video simple with great information straight forward respect 🙏

  • @kendalljohnston977
    @kendalljohnston977 Рік тому

    Seeing you pull in reverse. 😢
    I just sold my 2020 STi today

  • @Michael-fh9pe
    @Michael-fh9pe Рік тому

    Good afternoon PB. I did the radio and backup cam install just as in this video. 2012 ram without steering wheel control.
    The backup cam worked for about two weeks and then looked vertical purple lines once, then nothing.
    Any ideas how to test for the issue? I checked connections in back of radio, in left tail lamp and power from 12v power socket.
    Thanks for any assistance you can provide.
    Michael
    PS- love the CarPlay radio setup. Very nice.

  • @anthonydeleeuw
    @anthonydeleeuw Місяць тому

    Okay this does not look like my 2012 Dodge Ram camera! Mine is on the side of the tailgate latch handle. Where can I find a video to replace my factory made camera?

  • @TommySnyder98
    @TommySnyder98 2 місяці тому

    @provobeastaudio I have a 2010 ram 2500, this model has the full console. that spot where you t tapped into my truck didn’t come with that option unfortunately there’s just a little open storage box. So my question is where else can I snag accessory power from up by the radio?

  • @pauld.williams7764
    @pauld.williams7764 2 місяці тому

    Does the position of the camera stay the same? Have a 5 inch lift kit

  • @canadian8764
    @canadian8764 Рік тому +4

    Which wire is the reverse trigger wire from the smart harness?

    • @EATSLEEPFARM
      @EATSLEEPFARM Рік тому

      Easy to find. Take a test light and put it to a good ground. Probe the pins until you find the one that lights up with it in reverse. Done

  • @therryacosta5390
    @therryacosta5390 Місяць тому

    How do u take the screen off

  • @AlexRecchion
    @AlexRecchion Рік тому

    So I installed my back up camera everything works but it works manually not automatically switching on when in reverse how would I be able to get to switch on while in reverse any ideas

    • @ProvoBeastAudio
      @ProvoBeastAudio  Рік тому

      Your Ram year rewired a smart harness, and usually those smart harnesses provide a reverse trigger wire to provide that feature for you. So depends on what parts you used for the install.

  • @douglascontreras7548
    @douglascontreras7548 2 роки тому

    How did you install the satellital radio?

  • @sicksider1423
    @sicksider1423 2 роки тому

    I had my tailgate stolen and they took the rear camera with it does this also apply to my situation?

    • @johnstrawser420
      @johnstrawser420 Рік тому

      I did one where there could have been a backup camera for my 12 ram. I got everything at the back done wire ran inside. Tomorrow I'll make the first real onnection.

  • @vxel9550
    @vxel9550 Рік тому +1

    My backup lights stay on when I connect it directly into the wire

    • @ProvoBeastAudio
      @ProvoBeastAudio  Рік тому +1

      Did you hook up both ends of the red wire on the backup camera, one to accessory and the other to the reverse lights?

    • @vxel9550
      @vxel9550 Рік тому +1

      @@ProvoBeastAudio I just hooked the reverse light wire into the red wire on the backup camera and ground was grounded with bolt?

    • @vxel9550
      @vxel9550 Рік тому +1

      @@ProvoBeastAudio but as soon as I touch my backup camera red wire to the red and white reverse light wire, the reverse lights stay on and won’t turn off.

    • @vxel9550
      @vxel9550 Рік тому +1

      @@ProvoBeastAudio as in, reverse lights stay on even in drive for some odd reason. Mine is also a 2012 ram 1500

    • @vxel9550
      @vxel9550 Рік тому +1

      @@ProvoBeastAudio should I wire the black backup camera wire into the taillight black wire also? Or?