Great to watch, i think you're really honouring Bill with your attitude and respect to his work. Walking in his footsteps, not trying to wear his shoes.
and also the level of elbow grease, holy moly. these days you think there is a drill or a some kind of power tool for everything. nope, take a file in your hand and get started. respect
i love that you went so far into giving this knife this identity, it came out so good and some true oldschool vibe, if seeing it in a museum i'd take it as a true master piece, no doubt
Beautiful work as always. It was a pleasure to meet you and Chris at the Reynoldsville PA meet last year. Little tip for tapping. Before cutting the pommel from your piece in the lathe, use a center in the tailstock. Line that with the divot in your T handle tap wrench to keep everything straight. Just lightly dial your center forwards as you tap. Also look for some spiral modified bottom taps. Emuge and Gurhing are two I use often at work. For a blind hole they pull the chips out like a drill shaving and save you a lot of cleaning. One tap in the lathe like I described will do it all from start to finish. Eliminate a step, and have more accurate results.
Mr. Moran was a truly talented and generous bladesmith. I had the pleasure of taking a class he taught many years ago. Hea passed around 1 of his fantastic quillion daggers for us to look at. A photo of which is most likely in your book. The last day of the class he demonstrated how he did silverwire inlay and passed around the brass patterns he used for layout so we could make drawings in order make our own patterns. Your knife is a fantastic piece.
Analysis of Bill Moran’s knives and his Damascus was one of the closest representations of original Damascus. Where other people make that beautiful pattern Bill Moran actually had the carbon content almost precise. The piece you made is very nice
Congratulations, Matt!!! I've watched your journey for a long time now and truly believe you've earned every accolade you've received with many more to come so long as you never stop dreaming. You are an inspiration, cheers!!!
Congratulations Matt, it's nice to see your dedication and skill get recognized. Keep up the awesome work! Also i find your personality really endearing! :)
Heheeey!! I have to tell you it is a Perfection in Every ways!! The music, the rythm, informations and showings just totally synchronised and I LOVED IT!! Thanks for this vid, I saved for the future!!! Keep on!!!!!!
Matt, I just wanted to say there was so much history and key points you brought into this project that I just loved. You seem to be a really humble and genuine guy and that charisma shows in your work. Great job on the knife, but an even better job making the artistic connection to the ABS founder in a good story. I don't know if you wrote the concept out for the filming, or had someone direct it, but that was really movie quality man. Good work.
Ah thank you! I produced it all myself from head to toe. I don't write things out. I just film making it and hopefully a story follows the flow of the build. In this case I had so much to say that I had to eliminate a ton.
@@ThatWorks Well dude, you nailed it. I am sure your path to MS is coming along well. I am watching every video I can on tips and techniques, and I like the way you teach. I know you said in your videos you hope to impart some knowledge on folks, and its obvious that people are taking things away from your comments and views. If you ever get the chance, Id love to see some advice on tips you would have for guys pursuing the ABS certs.
What a beautiful tribute ⚒️⚔️🔪🗡️🇮🇪🍀🙏😁👍💪💥💥💥Sir I knew without a doubt you would win with this Bowie. Again beautiful work you deserve all the praise that comes your way. Even I thought the same thing that Bill Moran would appreciate this fine work! Bravo!!!!!!!
congrats on winning the award!! man i need to get started had i started way back when i first started watching y'all id probably be going for my JS cert now. regardless you all are an inspiration.
Met Bill in 1996 at the blade show as a12 year old who had every issue of blade magazine. He did a quick forging demonstration on a piece of mild steel. After the show he met my dad and I and gave me the knife he had forged. It was a prized possession for years. It was stolen in a box of knives that my dad and I made together 15 or so years ago. I'm sure the thief had no idea about the piece of history and tossed it out. Also met Dan Dennehey and he taught me how to throw knives his way. It was a great experience. Met Gil Hibben, he was super nice also.
![You Can Forge a Knife Correctly [Here's How] !](/img/n.gif)
💥 wtplay.link/thatworks - Download War Thunder for FREE and get your bonus! Also, how did you like this knife? What should I name this knife?
"Nobles Epee" from Vermintide 2
Billy's Revenge!...What steels did you use?? Btw, great job!
I christen that knife Vongola Bordo.
Damn, even though I don't really eat clams, I got hungry. 😂
Great to watch, i think you're really honouring Bill with your attitude and respect to his work. Walking in his footsteps, not trying to wear his shoes.
Very well put! Nails my mind set!
I saw the knife at BladeShow and it is absolutely beautiful!
You are too kind! Thank you!
The level of skill shown on this channel is absolutely astonishing
and also the level of elbow grease, holy moly. these days you think there is a drill or a some kind of power tool for everything. nope, take a file in your hand and get started. respect
@@breakshot7451 this is the way!
Thank you! I learn things and then do my best to pass those skills along!
@@ThatWorks this is the way;)
@@breakshot7451 Indeed
Twisting the algorithm like a damascus billet 👌
You are too kind ! Any ideas for a name?
i love that you went so far into giving this knife this identity, it came out so good and some true oldschool vibe, if seeing it in a museum i'd take it as a true master piece, no doubt
Ah thank you so much! It was a goal to give it an old school hand made feel with modern standards!
Beautiful work as always. It was a pleasure to meet you and Chris at the Reynoldsville PA meet last year.
Little tip for tapping. Before cutting the pommel from your piece in the lathe, use a center in the tailstock. Line that with the divot in your T handle tap wrench to keep everything straight. Just lightly dial your center forwards as you tap.
Also look for some spiral modified bottom taps. Emuge and Gurhing are two I use often at work. For a blind hole they pull the chips out like a drill shaving and save you a lot of cleaning. One tap in the lathe like I described will do it all from start to finish. Eliminate a step, and have more accurate results.
It was awesome to watch you build such a cool knife congrats on winning the award you deserve it 🙌
Thank you Logan! I appreciate that! Got any good ideas on a good name for this piece ?
@@ThatWorks maybe the Moran
I'm not good with names lol
@@Logan452. I mean that one is straight to the point
@@ThatWorks yea
First of all I apolodize for my english. His work was incredible, it was one of the best I've seen. Congratulations from Brazil.
Amazing work! A perfect collaboration.
This was a fun video and beautiful craftsmanship the first time I watched it. Looking forward to the rewatch.
Mr. Moran was a truly talented and generous bladesmith. I had the pleasure of taking a class he taught many years ago. Hea passed around 1 of his fantastic quillion daggers for us to look at. A photo of which is most likely in your book. The last day of the class he demonstrated how he did silverwire inlay and passed around the brass patterns he used for layout so we could make drawings in order make our own patterns. Your knife is a fantastic piece.
Wait what were these brass patterns? Blade patterns or inlay patterns ?
Id really like to know...
Congratulations on the win. That knife is a thing of beauty. Well done
congratulations such a beautiful and well thought out piece.
Congratulations. You and Ilya are phenomenal artists and smiths. I always enjoy your guys' content and wish you much success.
I appreciate that! I enjoy learning how to make better videos almost as much as growing a bladesmith.
Analysis of Bill Moran’s knives and his Damascus was one of the closest representations of original Damascus. Where other people make that beautiful pattern Bill Moran actually had the carbon content almost precise.
The piece you made is very nice
Beautiful knife. Congratulations on your win and your hard work definitely showed in this piece.
Congratulations, that knife is a piece of beautiful craftsmanship, well deserved mate.
Thank you very much! Any ideas on what I should name it?
@@ThatWorksperhaps something to do with the love of the ocean? A sailor term in Latin perhaps
This is unreal, I want that book for my own!
Good job on sticking to your plan and well done for getting that award!
The link to buy the book is in the discription
@@ThatWorkssadly no international shipping 😢
@@ChrisR676 email them. I'm sure they can work something out.
@@ThatWorks great idea
Beautiful! Thanks for sharing the process. I enjoyed learning about his work and your interpretation.
Thanks Dave! I plan on doing a full doc style video on Mr Moran soon!
A beautiful piece, with a beautiful narration.
Beautiful blade and gorgeous handle.
Congratulations, Matt!!! I've watched your journey for a long time now and truly believe you've earned every accolade you've received with many more to come so long as you never stop dreaming. You are an inspiration, cheers!!!
Great video. Thanks for sharing the sandpaper in the fretsaw tip! Well done and congratulations on the award!
Thank you very much! Hope the tip helps!
Absolutely stunning. He would have been proud.
There are many good even great bladesmith, but few are great bladesmith that also an artist, Matt is one those few
Awesome insight into your thoughts on the process.
And amazing Knife!!
Thank you res
Amazing work and best of luck!! Been a fan of yours for about 7 years now!
beautiful piece, well earned award.
Magnificent Bowie Knife !!!!!!!!!!!!!!!!
The Equalizer Bowie knife
Excellent work on the knife. Congratulations on EARNING what you invested so much skill and effort into, to win.
Thank you so much! Even if I didn't win the award I would have won with all the new skills I gained in the process.
Wow, Matt. That is stunning. Good job!
Beautiful knife!
Congratulations.
Cheers.
Congratulations! both on winning the award and on making a truly beautiful knife. great presentation as well.
perfect working studio
Wow that clam shell bolster really came out nice.
You're an amazing smith. I loved watching your progress over the years. Both you and Ilya.
Thank you for being around all these years! We will do our best to continue to grow.
Congratulations. Nicely done 👍 looks amazing
Amazing work!
Congratulations Matt, it's nice to see your dedication and skill get recognized. Keep up the awesome work! Also i find your personality really endearing! :)
Oh thanks man! I don't hear that a lot :D
beautyfull work as always
Congrats man!
thank you!
Beautiful piece and an excellent idea to assemble Moran elements that he never put together.
I thought so too! Make something original yet true in spirit to the subject matter.
Congratulations, Sir!
Thank you for keeping this clear and concise. Instead of making this 20 parts. 💕
Haha ! I mean, long form has it's value as well.
I love the pattern on that Damascus, and the mirror clamshell detail on the bolster and handle. Congratulations on the award- nice build!
Thank you very much Jim! You seem to be someone that notices things...Any good ideas on a name for this piece?
@@ThatWorks man, I dunno- how about Bill's razor?
@@jimcorbett3764 hmmm I'd like to work in the clamshell theme somehow.
@@ThatWorks fanshell slicer? deadly quahog?
@@jimcorbett3764 gigity
That’s beautiful!
That's gorgeous. So beautiful man.
Damn nice knife! I love the guard.
Beautiful Bowie!
And I agree Mr. Moran would probably appreciate it!
Congrats Matt!! ❤
Heheeey!! I have to tell you it is a Perfection in Every ways!! The music, the rythm, informations and showings just totally synchronised and I LOVED IT!! Thanks for this vid, I saved for the future!!! Keep on!!!!!!
Congratulations Matt! Beautiful build!
Glad you like it! what should I name this?
@@ThatWorks"Tombstone 23"!!!
@@markramey5437 sounds almost good but also like a delish pizza pie
@@ThatWorks lol, now that you mention it, it sure does! I'll let you know if I come up with something better!
Absolutely beautiful knife. Well done, sir!
Insanely beautiful knife and I think that I am going to have to get that book
thats the most beautiful bowie and pattern,congratulations Matt
Thank you! There can be real beauty in simplicity
That is one of your best works ever
Matt, I just wanted to say there was so much history and key points you brought into this project that I just loved. You seem to be a really humble and genuine guy and that charisma shows in your work. Great job on the knife, but an even better job making the artistic connection to the ABS founder in a good story. I don't know if you wrote the concept out for the filming, or had someone direct it, but that was really movie quality man. Good work.
Ah thank you! I produced it all myself from head to toe. I don't write things out. I just film making it and hopefully a story follows the flow of the build. In this case I had so much to say that I had to eliminate a ton.
@@ThatWorks Well dude, you nailed it. I am sure your path to MS is coming along well. I am watching every video I can on tips and techniques, and I like the way you teach. I know you said in your videos you hope to impart some knowledge on folks, and its obvious that people are taking things away from your comments and views. If you ever get the chance, Id love to see some advice on tips you would have for guys pursuing the ABS certs.
What a beautiful tribute ⚒️⚔️🔪🗡️🇮🇪🍀🙏😁👍💪💥💥💥Sir I knew without a doubt you would win with this Bowie. Again beautiful work you deserve all the praise that comes your way. Even I thought the same thing that Bill Moran would appreciate this fine work! Bravo!!!!!!!
Congratulations. Really beautiful knife.
Congratulations ☆ well deserved &
Out standing job!!!! Best Regards ☆
Wooooow, congrats man. Such a beautiful piece.
Awesome work as always
Thank you motix! Any good ideas for a name?
To be honest i dont think im qualified to name it but my idea would be something like: Trusty ol' Billy
Congratulations on winning the prize, the knife turned out absolutely gorgeous!
That is a beautiful blade
congrats on winning the award!! man i need to get started had i started way back when i first started watching y'all id probably be going for my JS cert now. regardless you all are an inspiration.
helping give some momentum back to the channel
Great job and congrats on the award. I like the carving you did around the inlay. Really makes it pop.
Beautiful
Thank you! Cheers!
Beautiful.
Great work of art. Congratulations from Germany 👍
awesome knife!
Nice why file plug in there too, love that show!
Did I? I love them too but when did I plug them
Win lose or draw. Beautiful
huge congrats Matt that is a sick knife you do beautiful work cant wait to see the next blade you do Mark 👍✌
Awesome job Matt
Thank you JT !
I'm a bit late to the party on this one but you've really outdone yourself with this Matt. Absolutely gorgeous! ❤
Great work Matt! Stunning craftsmanship mate, I mean wow! Beautiful 🔥⚒❤
thats an incredible job. congrats!
You won!! What a beautiful knife
Sehr schönes Stück! Congrats!
Matt, this is an absolute gorgeous blade!
Congratulations on the price. VERY nice build 👍👍.
Met Bill in 1996 at the blade show as a12 year old who had every issue of blade magazine. He did a quick forging demonstration on a piece of mild steel. After the show he met my dad and I and gave me the knife he had forged. It was a prized possession for years. It was stolen in a box of knives that my dad and I made together 15 or so years ago. I'm sure the thief had no idea about the piece of history and tossed it out. Also met Dan Dennehey and he taught me how to throw knives his way. It was a great experience. Met Gil Hibben, he was super nice also.
Congratulations on win the award. That is a beautiful knife.
Thank you Adam! Any ideas on what I should name it?
That is a beauty
Congratulations. That is a truly beautiful knife and you should be extremely proud. Was great watching its creation.
Wow!! And congrats🙂
Well done!
Thank you!!!!
congrats Matt!
Thank you CJ !
awesome video!
Great work ❤ 👏👏👏
It doesn't matter what you make everything looks amazing
You should make a competition chopper , would love to see one by you guys , love your videos always
Looks gorgeous, glad you won the award, well deserved
Wow, great video dude.
And such a lovely knife with incredible connections, both physical and METAphysical! 😄 Gorgeous knife!
Congrats for the award Matt! It's truly a pleasure watching your videos! Many thanks for you and the team's efforts!
@@ThatworksTwo Of course solo with the knife making I mean....but team with the video making?
Congrats Matt! Real purdy knife you got there!
:D thank you. It's a classic! Now can i make modern designs ?
Metallic powder and thin CA glue is also really great for wood inlays
Ive seen some of that done, but it's def a different look.
That is a radiant knife. I want one.
Congratulations. Great looking knife. I’m curious to see what you do with that first one your made