Replacement of throttle gaskets and intake manifold Renault Megane Clio Laguna1.4,1.6,1.8, 2.0 16v
Вставка
- Опубліковано 31 гру 2020
- Hi
Today I will show you how to replace the gaskets in the intake manifold and the throttle.
The original gaskets turn plastic after many years and stop sealing.
Consequently, the engine draws in left-hand air and the revs are swayed.
Therefore, it is worth replacing them. The total cost of these 7 original gaskets is 25 euros.
I invite you to watch. If you have any questions, feel free to ask them in the comments. I invite you to watch. Thanks.
Engine running before replacing the gaskets- • Renault Megane I 1.4 1... - Авто та транспорт
The second part is the replacement of the intake manifold
ua-cam.com/video/5HNUfQE790g/v-deo.html&ab_channel=LewisK
Excellent video. No bs music, no dumb introduction, just straight hard content. 🎉
Thanks
Thank you very much 👏🏻
Great video ty so much
Thank you so much Where does the evaporated oil from the engine go?
Is this complicated job or not so ? My car have problems that it cant hold the rpm and want to turn off when motor working in neutral position gearbox. What it could be wrong ?
Could I replace the Pressure Cap thats visible after you remove Intake , without removing other stuff?
Video is perfect. What is the screw sizes ?
Bonjour, j'ai un problème avec ma voiture Clio 1.4 16v, pouvez-vous m'aider?
What was the fluid you applied on the gaskets prior to installation?
engine oil
@@lewisk4425 Silicon grease would be better yes?
Where is the pcv valve?
In petrol engines in megane I there is no pvc valve as such. There is an oil separator, which you can see 15:34
@@lewisk4425 thanks. Does your engine the same like this when it's warm? There is a positive pressure on idle. It's negative when i rev it up: ua-cam.com/users/shortst5wR9hXAoTo?feature=share
slt cv
oem number please
which parts?
@@lewisk4425
rubber seal
Thank you so much Where does the evaporated oil from the engine go?