Hi just wanted to share a potential fix that most people and repair people could look past I was getting constant errors during the drain or trying to spin. Tried to reset and it would work and then not work. After getting ready to call a repair person, I notice that the latch was a little loose on the door. I closed it while watching how it lined up where the latch goes into, and it was way off center. The latch mount has the ability to slide back and forth to line up (need square bit) I loosened it and realigned the latch to be centered and now on my 4th load without a single shut down with the "E1" "F3" error codes flashing back and forth.
This is my problem but I've cleaned everything out it's not telling it to stop filling with water I changed out the inlet filter still same thing FH code I'm thinking the pressure switch I've done everything else
Thanks Jay, Can you try pulling that drain tube that goes into the wall out of the big tube so it’s only in there by 8 inches . I think that tube goes too far down that big hole.
I can’t find the solution to my problem on your videos. My Whirlpool Duet front load washing machine makes a loud high pitch whining noise on the spin cycle. Do you have a FYI solution to my problem. Any help appreciated. (Model WFW9151YW00)
Mine does the same but if I restart the cycle it washes normally so I don’t think there’s something actually broken in it. Why is it whining so much then?
Thank you so much for this video. I’ve been trying to call someone but no one in the office. I found your video and my washer is working..
Glad I could help!👍😊
Thank you, video was great and very helpful
Happy to help 😊
Thanks for posting, the screen on the hot water inlet line was clogged, causing the issue. Works perfectly again!
Awesome,
Thanks Todd,
Thank you. Please check out our new DIY Appliance Repair channel at: m.ua-cam.com/channels/bQy5UxlvaPPsDHvfvW76JQ.html
Hi just wanted to share a potential fix that most people and repair people could look past I was getting constant errors during the drain or trying to spin. Tried to reset and it would work and then not work. After getting ready to call a repair person, I notice that the latch was a little loose on the door. I closed it while watching how it lined up where the latch goes into, and it was way off center. The latch mount has the ability to slide back and forth to line up (need square bit) I loosened it and realigned the latch to be centered and now on my 4th load without a single shut down with the "E1" "F3" error codes flashing back and forth.
Thank you for this😊
Hello Scott I’ve got a whirlpool Duet washer that always gets stuck at 7 minutes into the spin cycle...any suggestions?
You might have a clogged inlet water screen on the cold side hose .
@@ScottTheFixItGuyChannel Appreciate yr prompt reply..thanks alot for the suggestion!
Hi I have a problem with my washer it agitate slowly and it don't Spain dry. With the clothes alone it agitate but as water fills it slow down
Can you send your model number to my email at: scottthefixitguy@yahoo.com
So did you have to clean out/ replace the cold water line ? What did you do to solve it?
That's what I want to know; he never finished the video. I'll ask as well, did you replace the inlet valve, clean it, or do anything else??? Thanks!
This is my problem but I've cleaned everything out it's not telling it to stop filling with water I changed out the inlet filter still same thing FH code I'm thinking the pressure switch I've done everything else
Thanks Jay,
Can you try pulling that drain tube that goes into the wall out of the big tube so it’s only in there by 8 inches .
I think that tube goes too far down that big hole.
What did you conclude?
That machine needed a new fill valve. You can try cleaning the fill valve filter first to see if that helps👍
I can’t find the solution to my problem on your videos. My Whirlpool Duet front load washing machine makes a loud high pitch whining noise on the spin cycle. Do you have a FYI solution to my problem. Any help appreciated. (Model WFW9151YW00)
...plus, the faster it spins, the louder the high pitch whine gets.
I am sorry to say that that is caused by a worn out rear bearing.
That repair typically cost $500.
Best thing now would be to get a new machine😢
Scott, thanks so much for replying to my question. Although I hoped for a different answer, I appreciate you taking the time to respond.
sounds like drum bearings
Mine does the same but if I restart the cycle it washes normally so I don’t think there’s something actually broken in it.
Why is it whining so much then?
10
10 what?