Love your content! I would really appreciate it if you could describe some of the steps you do in your videos for noobs like me, for example modifying of the motor thanks!
1. Barrel nut was regular PLA. It has since exploded. Got a steel one from GBLS. 2. Bearings/bushings should always be retaining compounded to the shell. This should be a given, but a ton of techs don't do it and it drives me insane every time I see a picture with the bearings/bushings riding on a gear with the shell open 🤬
There are a few tricks you can apply to adjust the gearbox angle, but often you end up unable to use one or both of the gearbox pins. Luckily I didn't need to
@@KAG2203 takes standard gears so you can put any ratio in, but 16:1 at fastest if you want 19T. I'm using 18:1, but the compression stroke in this is slow af so I'm limited to slow cycling. Currently a 28TPA 19K. I'll do some math to figure out my max safe speed soon tm
@@j-airsoft Who makes the 16:1 gears for SR25, I've never managed to find anything else than 18:1 with 19 teeth? Do those 3 extra teeth slow down yhe cycle rate that much? I only got my SR25 becuase of the extra air volyme (DMR build, 3 extra teeth = able to use hevier BB's) so I wouldn't dream of putting 16 teeth gears in mine, but "each to his own" I guess👍
@@KAG2203 no, but i have an airbrake installed which drastically slows down the last half inch of compression and increasing chances of the sector chewing things up there is no full 16:1 19T, but you can stick the rocket 16:1 spur in for approximately a 17:1 reduction
@@j-airsoft Yeah i know, was just kinda curious which one you had specifically as they range in price, quality, features, etc. Also would need to be ~5.5mm so you could tape it and move it freely down the barrel
Thats alot of nice parts. Fruitloop jefftron, mancraft receiver, retro gearbox, paragon barrel setup. Your gonna make umbrella fanboys cry
I love watching these videos by you. I hope if i ever did get a gun built by you it would be filmed like this
Your build videos are so satisfying to watch 🙌🙌
Love your content! I would really appreciate it if you could describe some of the steps you do in your videos for noobs like me, for example modifying of the motor thanks!
Polska jakość! Pozdrawiam z środkowej Polski!
👌
Two questions:
1. What material did use to print that barrel nut?
2. Why do you glue the bearings?
1. Barrel nut was regular PLA. It has since exploded. Got a steel one from GBLS.
2. Bearings/bushings should always be retaining compounded to the shell. This should be a given, but a ton of techs don't do it and it drives me insane every time I see a picture with the bearings/bushings riding on a gear with the shell open 🤬
What is the tool you use to punch the bearings in?
"retro arms bearing installation" thingy I grabbed from brillarmory
Hello, what are those bearings? Awesome video!!
Paragon Armory J caged bearings paragonarmory.com/collections/bearings-bushings/products/8mm-j-caged-japanese-steel-bearings
can you do like a nation geographic documentary of this build? pls and thx
😂
what can you do if the nozzle is missaligned with the inner barrel assembly?
There are a few tricks you can apply to adjust the gearbox angle, but often you end up unable to use one or both of the gearbox pins. Luckily I didn't need to
Nice build, brushless going into this one?
Retro Arms version 2.5 split gearbox?
In a weird twist of fate, unfortunately, brushless motors are too fast for this build. 😭
@@j-airsoft To fast🤔, they only make SR25 gears in 18:1
@@KAG2203 takes standard gears so you can put any ratio in, but 16:1 at fastest if you want 19T. I'm using 18:1, but the compression stroke in this is slow af so I'm limited to slow cycling. Currently a 28TPA 19K. I'll do some math to figure out my max safe speed soon tm
@@j-airsoft Who makes the 16:1 gears for SR25, I've never managed to find anything else than 18:1 with 19 teeth?
Do those 3 extra teeth slow down yhe cycle rate that much?
I only got my SR25 becuase of the extra air volyme (DMR build, 3 extra teeth = able to use hevier BB's) so I wouldn't dream of putting 16 teeth gears in mine, but "each to his own" I guess👍
@@KAG2203 no, but i have an airbrake installed which drastically slows down the last half inch of compression and increasing chances of the sector chewing things up
there is no full 16:1 19T, but you can stick the rocket 16:1 spur in for approximately a 17:1 reduction
You call that a 7/10 for a print?! Need to get myself a Prusa I guess.
I've never achieved a 10/10 print, but I'd be insulting some of the amazing pieces I've seen
Perun .. Gate .. Mancraft welp Polish quality :D
Also do more vids :>
Hey, could you let me know what bore scope that is ?
any 6mm endoscope/borescpe will work unless you somehow have a barrel less than the diameter of your bbs
@@j-airsoft Yeah i know, was just kinda curious which one you had specifically as they range in price, quality, features, etc. Also would need to be ~5.5mm so you could tape it and move it freely down the barrel
@@arilean www.amazon.com/gp/product/B07PBF6DX5 non affiliate
@@j-airsoft Thanks, appreciate it and the phenomenal content