Hey Springer! Long time user and fan here… Im beginning to tinker around with the PX4 as I tend to use this setup for USPSA. Like the whole setup but the point you mention about that screw not being out all the way in is very important. I was wondering why my mags weren’t seating that well at first… then I noticed I gouged out the back side of the magwell where that retaining screw is. I would recommend y’all make that apparent among your description on the website as well as Langdon’s in addition to something within the product itself as I had no information on how critically important that is to just have to screw poke out enough to not bind against the magwell while enough to retain the basepad. A close up would help of that as well. I just want to see y’all succeed and not get frustrated customers over something like this.
Under which circumstances would you want to install your power spring? Im asking since I just installed your magwell, installed your mag extension with a power spring, and I cant get any more than 15 rounds in the magazine (with your extension and power spring) This is on a PX4. Thank you
Please make sure the bottom retainer plate isn’t on the bottom of the spring. The spring is used when the factory spring needs replacement. Orders@springerprecision.com can assist with more detailed assistance.
We do not have a video for each model, as the process is the same for all of the extensions. Here is a link to the P320 video. ua-cam.com/video/IhoT99FDcDQ/v-deo.html
Nice info 👍
Hey Springer!
Long time user and fan here… Im beginning to tinker around with the PX4 as I tend to use this setup for USPSA.
Like the whole setup but the point you mention about that screw not being out all the way in is very important. I was wondering why my mags weren’t seating that well at first… then I noticed I gouged out the back side of the magwell where that retaining screw is. I would recommend y’all make that apparent among your description on the website as well as Langdon’s in addition to something within the product itself as I had no information on how critically important that is to just have to screw poke out enough to not bind against the magwell while enough to retain the basepad. A close up would help of that as well.
I just want to see y’all succeed and not get frustrated customers over something like this.
Hi, will this work on 10rd mags or do all mags need to have the base pad extension to work with this mag well?
They need the basepads as the factory tubes with factory pads are not compatible with magwell use.
Under which circumstances would you want to install your power spring?
Im asking since I just installed your magwell, installed your mag extension with a power spring, and I cant get any more than 15 rounds in the magazine (with your extension and power spring)
This is on a PX4.
Thank you
Please make sure the bottom retainer plate isn’t on the bottom of the spring. The spring is used when the factory spring needs replacement. Orders@springerprecision.com can assist with more detailed assistance.
@@SpringerPrecision Thanks for the reply
Where is the p365 x macro mag extension installation?
We do not have a video for each model, as the process is the same for all of the extensions. Here is a link to the P320 video. ua-cam.com/video/IhoT99FDcDQ/v-deo.html
@@SpringerPrecision mine is coming in this Friday thanks for the information!