I'm super excited. With gas getting so high I can't wait to get my Navi! I also can't wait to customize it! I'll definitely will be subbed here for a long time to come.
@@thenintari MSRP is 1,807 $.... From what I've seen on youtube, people suggested it should be between $2,500 - $ 3,000. The dealer first offered it to me for $4,000. ROFL. He finally adjusted it to $3, 384 but that's still too much. It's almost double the MSRP. I ain't budging from the 3K $ limit. I'll wait till the hype dies down.
Pardon me for being contrary but if the weights are lighter you will get a faster acceleration and mid range but a lower top end. Heavier weights result in a higher top end and slower acceleration. Heavier weights result in a higher top end and slower acceleration. I would really like to see somebody put in some slightly heavier weights to see if they get more top speed.
Did anyone else notice in the video that when installing the sliders they got two unside down compared to the other 4? The third slider that he put in and the 6th slider in variaor was backwards compared to the other 4!!
in your video you say these are Dr. Pulley 11g Rollers but what size? I see there is a 15x12 and 18x14 physically these look most like the 15x12 but what exact ones are you using please?
Hey thanks for the question! Definitely a significant improvement when accelerating. Can’t speak on top end because the air intake has not been tuned with the carburetor. Will do that in an upcoming video once the jets and exhaust come.
What are some necessary tools? Where can I get such tools? Will you post carb kit , jetting, and new exhaust? Does it affect warranty? Does it affect gas milage?
Necessary tools: socket wrench, sockets, impact gun. Carb jetting kit: working on a video that is not yet complete Exhaust: is in this video: ua-cam.com/video/pkGAXcL-rbo/v-deo.html Yes it affects warranty Yes having more performance has a negative impact on gas milage
Hi great video. I used NCY 12g rollers and managed to get the bike up to 52mph. But at the top end speed I’m getting a vibration, any thoughts on why? I did notice the 12g rollers have different looking sides on them. Do you know if they all have to go in the same direction? 12g Rollers did not come with any directions and can’t seem to find any information or videos on it. Thank you
I’m putting a deposit on my Navi tomorrow this is for sure one of the first mods I’m doing I’m thinking this then an intake and exhaust. Any recommendations?
Weights are a no brainer in my opinion. If you do intake and exhaust you will also need to jet and tune the Carburetor. Hoping to have a video on that soon!
do you have the 18x14 or 15x12? I'm gonna be getting the same exact color bike tomorrow. I wanna order them off Amazon. They're pretty decent price. I saw the comment before mine. Asking about what's the difference between 13 and 11. I'm under 200 pounds. Would I be better off with 13grams? I'm around 140lb
Hello! I do plan to do a speed run, however it is not my bike and they have not put enough miles on it for it to be considered Broken in (only 200miles so far). Once it is broken in we will do top speed runs. Currently it is going 55mph consistently.
Yea no one has done it on the Navi yet to my knowledge. If you want to learn more on what it takes to do an EFI when there aren’t parts available for your particular motorcycle BombShellBikes has a pretty good over view on what it entails here: ua-cam.com/video/OmAfNGKYG2A/v-deo.html
I had a Honda Express 49cc was able to get it to go 50 mph. I used trick fuel 110 octane. I learned how to rebuild those engines fast.
I had about 3 of those; my Navi helps me relive those good ole days!
I'm super excited. With gas getting so high I can't wait to get my Navi! I also can't wait to customize it! I'll definitely will be subbed here for a long time to come.
I really appreciate that! Definitely be on the look out for some upcoming videos on the Navi that’ll include aftermarket exhaust and jetting the Carb!
Just went to the dealer today, They tried to rip me off.... I didn't buy it.
@@WTF_BBQ ugh sorry to hear, prices seem to be all over depending where you go
@@thenintari
MSRP is 1,807 $.... From what I've seen on youtube, people suggested it should be between $2,500 - $ 3,000. The dealer first offered it to me for $4,000. ROFL.
He finally adjusted it to $3, 384 but that's still too much. It's almost double the MSRP. I ain't budging from the 3K $ limit. I'll wait till the hype dies down.
Let’s go Brandon
Pardon me for being contrary but if the weights are lighter you will get a faster acceleration and mid range but a lower top end. Heavier weights result in a higher top end and slower acceleration. Heavier weights result in a higher top end and slower acceleration. I would really like to see somebody put in some slightly heavier weights to see if they get more top speed.
Dudes! You put two of the weights in UPSIDE DOWN! Slow down and focus... ;)
I kept scrolling the comments to see if I was the only one that noticed. 2 just didn't look the same as the others.
Did anyone else notice in the video that when installing the sliders they got two unside down compared to the other 4? The third slider that he put in and the 6th slider in variaor was backwards compared to the other 4!!
in your video you say these are Dr. Pulley 11g Rollers but what size? I see there is a 15x12 and 18x14 physically these look most like the 15x12 but what exact ones are you using please?
So what were the results ? Noticeable difference ?
Hey thanks for the question! Definitely a significant improvement when accelerating.
Can’t speak on top end because the air intake has not been tuned with the carburetor. Will do that in an upcoming video once the jets and exhaust come.
So you can’t just add these Dr. pulley’s and expect to get more speed without doing all this other extra work?? Is it necessary to do the extra stuff
What are some necessary tools? Where can I get such tools? Will you post carb kit , jetting, and new exhaust? Does it affect warranty? Does it affect gas milage?
Necessary tools: socket wrench, sockets, impact gun.
Carb jetting kit: working on a video that is not yet complete
Exhaust: is in this video: ua-cam.com/video/pkGAXcL-rbo/v-deo.html
Yes it affects warranty
Yes having more performance has a negative impact on gas milage
Hi great video. I used NCY 12g rollers and managed to get the bike up to 52mph. But at the top end speed I’m getting a vibration, any thoughts on why? I did notice the 12g rollers have different looking sides on them. Do you know if they all have to go in the same direction? 12g Rollers did not come with any directions and can’t seem to find any information or videos on it. Thank you
I’m putting a deposit on my Navi tomorrow this is for sure one of the first mods I’m doing I’m thinking this then an intake and exhaust. Any recommendations?
Weights are a no brainer in my opinion. If you do intake and exhaust you will also need to jet and tune the Carburetor. Hoping to have a video on that soon!
@@MakingaBigRuckus I will stay tuned for sure the dealership won’t have my Navi at least till the beginning of may I can’t wait
do you have the 18x14 or 15x12? I'm gonna be getting the same exact color bike tomorrow. I wanna order them off Amazon.
They're pretty decent price.
I saw the comment before mine. Asking about what's the difference between 13 and 11. I'm under 200 pounds. Would I be better off with 13grams? I'm around 140lb
Do a top speed run
Hello! I do plan to do a speed run, however it is not my bike and they have not put enough miles on it for it to be considered Broken in (only 200miles so far). Once it is broken in we will do top speed runs. Currently it is going 55mph consistently.
@@MakingaBigRuckus is that with just the rollers or the rollers plus other upgrades?
This might be a stupid question but will modding my navi void the warranty
Depends on the mod. Some can void your warranty. Replacing rollers, probably not.
What do you mean that it's "sort of" the transmission?
The 3rd one you dropped in was wrong...did you fix it?
Good eye! Yes that was corrected before installing
Could I possibly add a 20g roller, and if so would it increase speed?
I don’t foresee that increasing speed, it certainly would decrease acceleration but I don’t think you would see much top end enhancement
Running high octane doesn't make more power unless you can advance timing 😂
So these are highly recommended or they should be diff in weight? Thank you.
Also whats the price on these since they are sold out. Thanks.
Usually $30, some are going with 11, some 12, some 13. It is all personal preference
Thank you. What would be your opinion for a daily driver. What number should I get. Thanks.
@@MakingaBigRuckus Hello, what´s the original roller weigth on the Navi?
I believe the original is 19 grams
Hello, what´s the original roller weigth on the Navi?
I think it's around 17g for stock sliders
Actually two were wrong 😅 I noticed...
There were! They were fixed before we installed it. Good eye
Question is?
What's this do to the warranty?
Thanks!
Voids it, so wait til you had it over a year.
How come nobody done carb to EFI conversion yet?
Yea no one has done it on the Navi yet to my knowledge. If you want to learn more on what it takes to do an EFI when there aren’t parts available for your particular motorcycle BombShellBikes has a pretty good over view on what it entails here: ua-cam.com/video/OmAfNGKYG2A/v-deo.html
do u have to dynotune after u install these?
Hello! No you do. It
Do not.. auto correct….
Hey if I cannot ding 11 gram would 10 be to light?
Find*
Also it’s a Honda navi and I am 230
I wouldn’t go to 10, 11 is rather light as it is 12-13 may be the sweet spot, haven’t had a chance to fully rest yet.
@@MakingaBigRuckus thanks man I ended up getting some 14s
@@jacobmcdermon4114 hello Jacob, what's your experience with this weight?
i got the 11g and im kinda disappointed, i didn't notice much if any at all improvement on acceleration.
Your weight can impact performance, though you should notice it getting up to speed a little quicker
@@MakingaBigRuckus my weight is optimal. im 16 and only 130lbs so its definitely not that im too heavy.
@4:07 that one isn't in correctly.
Didn't look like it.. 😬
@@wascalywabbit look at 4:35 too, also not correct.
All of them are sitting correctly.
@@jasonmccoy5387 hopefully when they installed them they fixed those two. But in the video at those time stamps they were not in correctly.
@@jcsuperstars1100 in the video they may have been placed wrong but the final product they are correct. good looking out.
Another one isn't right @4:35 either.....wow....
Good eye man! These were corrected before install
What wasn’t right?
the last one look like in bad position.... i think so
Good eye, we did correct those off camera.