Very Relaxed Engine build l Satisfying l Mechanic l Art l Subi-Performance
Вставка
- Опубліковано 1 бер 2019
- INSTAGRAM: / subiperformance
FACEBOOK: https: // subiperformance/
WEBSITE: https: //www.subi-performance.com/
With the videos I give you an insight into my work.
My Subi-Performance company is an engine manufacturer specializing in the construction of Subaru high-performance boxer engines.
Most of the tools I use are from Würth and the measuring equipment is from Mitutoyo.
Main Camera: Panasonic Lumix G DMC-GX8H
Action Camera: GoPro 4 Hero Session
If you have any questions or suggestions write me an email
Info@subi-performance.com - Авто та транспорт
cam lock tool : www.subi-performance.com/product-page/camshaft-lock-tool
What are you adding to the cylinder up top ? Is it QuickSeat / some other ring break-in chemical ?
Awesome channel BTW 👍
Hey Subi performance? Where are you located? Can you do a lift system and performance enhancement to my 2020 outback w/the 2.4 turbo motor? Damnit! Nevermind. I just saw you are located in Germany.
Geraldo.oliveiradasiva
Ллх
مخ
No music, no comments, no interruptions, pure work, the place was beauty... Thank for share.
Dang, that work space is so organized and clean. That engine so spotless. Love the videos you put out, makes working on PCs at work go by quicker.
тот случай когда щепетильно собрал свою субу .. надавил и опять в гараж удовлетворяться ;)
That torque sequence is crazy.
Yeah I wondered about that too then looked it up:
1. Apply a coat of engine oil to washers and bolt threads (or his ARP Torque Lube)
2. Tighten all bolts to 29N*m (22ft-lb) in alphabetical sequence.
Then tighten all bolts to 69N*m (51ft-lb) in alphabetical sequence.
3. Back off all bolts by 180deg first; back them off by 180deg again.
4. Tighten the bolts (A) and (B) to 34 N*m (25ft-lb).
Very detailed and systematic. I loved the way he torqued the bolts down with several steps and how he checks the gaps with feeler gauge. Very seldom do I see such good job even at the dealerships or performance workshop in our country. Great job Subi Performance!
During your brilliant work you were speechless and at the end you left us spechless too.
Uncombarably superprofessional done
He just keep it clear the sounds so we can classify it as ASMR :DD
These attention to details matter so much . This is how it is done right.
Not clean enough
Τhis man is a guru
!!!!!!!!!!!!!!!!!!
No one goes to the demonstration to tie an engine with such a detailed
!!!!!!!!!!!!!!!!!
Greetings from GREECE.
@@figorrahman yep!!!!!!!!!!
Measured cups , opposed to measured shims ? , This is another level.
Good things in life take time. So as a life of every engine built on Subi Performance. Long live the boxer!
Just love this. Watching this is so therapeutic. I hope you feel the same as you do the build. Cheers :)
I could sit here for hours watching this
Taking a break from my EJ25 build (in a much colder/less well equipped garage) to watch you rebuild. Outstanding as always!
Loved cars all my life, by far these are my favorite little engines.
His garage is well organized good job keep up the good work
Challenge , take a drink every time the torque wrench clicks.
Thank you Andi, showing the Tomei cams install, fantastic work. 🤘🤘
this is so relaxing asmr metal and bolts clanking around its so relaxing im not even kidding i enjoyed this so much
Good jobs i like from Ethiopia 🇪🇹🇪🇹🇪🇹
Excelente vídeo, parabéns!!!
That's a man who knows his trade 👌🏼
This guy is not a mechanic, he is an engine surgeon.
New ASMR Category - Subaru Engine Assembly!
Llllllllĺlllllllllllll
This is absolutely beautiful work.
O cara é bom olha o capricho da sua oficina mais limpa que um restaurante kkk top👏👏💪💯profissional
Bruh, this shop is so clean! Id take my car here anyday if I could, best of the best pros. Keep it up!
Amazing Job! GOD of Subaru engine building in whole germany!! *maybe world XD
You must be one of the top builders in the world
На таком сервисе работа мечта все окуратно и чисто
Было не заснул, пока смотрел, хожу теперь в очаровании, Зеваю...
Great job as you do everytime
Nothing more satisfy than that tourqe Spec sound
I love you Andi😍😅 great job!!!
106 rallye in the background 👌👍🏻
Excelente trabajo un ambiente muy limpio con toda clase de herramientas
First class attention to detail👍🤯
Сразу видно ,что человек любит технику, как аккуратно собирает!
Ставлю лайк👍Как же всё круто, чисто окуратно!
Тоже сразу на этом акцентировал.. мастерская, офис.. офигенно конечно.. особенно когда сравниваешь со своими условиями)
@13:00 In the background, next to the table is the most important tool in every shop ever! :D Great video, thanks!
I was told its a Fine alighnment toll .
This is the proper way to build/restore/refit the engine components.no hurry and the sense of urgency just a relax calm attention to all details.
With such careful and precise hands and such attention to detail could have been a midwife !. Enjoy your videos.
This is therapeutic 😃
You are the man !!! I love your shop how clean it's
Dit is echt een top expert alles tot in de puntjes zo precies ik hou daar van. En zijn hond vind ik ook zo mooi
Perfect work 👍
Good to see someone as meticulous as I am building Subarus
Dada in bro thanks 🤝 very nice video 🤝🌹
Very clean workshop
Sympa la petite 106 rallye 👍
Wow, noch vor ein paar Wochen hattest du ca 2000 Abbonenten, jetzt sind es fast 30000. Gratulation dafür. Wünsche dir weiterhin so einen riesen Sprung und alles Gute.
can you tell us why and what kind of grease do you use for the cilinders before mounting the pistons? First lubrication is the another critical thing to ensure the long life of engine. Thanks for the detail awesome work!
Der versteht sein Handwerk. Und alles ohne Handschuhe. Alle Achtung. Viele Grüße aus Germany.👍👍👍👍😀😀😀😀
I was a little impressed by how organized his work area is. Then saw his toolbox of various buckets :O
Мужик!!!!! Не то что дилетанты в автомастерских! Всё до сотки миллиметра продумано до каждого Ньютона!
Когда постоянно делаешь одинаковую работу , всё доходит до автоматизма . Ничего сверхъестественно в видео нет . За чистоту и аккуратность +
@@Antonio-pd7tn более того, мне интересно, почему он сальники распредвалов сразу не поставил и ге обтянул крышками?
Bersih pisan ya diamah.. 👍
Hola sobresaliente con mencion. Inpecable no es necesario ni palabras ni ruidos de loca musica- Las acciones hablaron mas que mil palabras . Bendiciones que le sorprendan. Willy desde el URUGUAY
I am curious to know what lead you to specialize in Subaru engines as opposed to some other type of engine?
That was simply wonderful as ASMR. Thank you for sharing. Although i'd remove the music and no fast motion.
I followed your work from here in Brazil. Congratulations for the videos, they are the best
It’s nice to see an engine get the calm, and relaxed TLC it deserves!
Sehr akkurat!
Feine Werkstatt!
Haven't seen valve adjustment like that since my XJ6.
Man we need more content like that in UA-cam
Geraldo.olieveiradasiva
Great video! What are you using in the spray bottle at 1:38? Acetone? Mineral spirits? Danke!
super work
جدا جميل…. احسنت العمل
Are you restoring the gearboxes? Also interesting to see.
Un maestro, complementi ;)
Your video taking n movement makes my head spinning n giddy …..
Ughhh it's soo satisfying
A job known person needs lot of patience to watch this mechanics work. Finally has he started the engine or not.
I would love to have the pleasure of working in my own shop, with all necessary and top notch tools, on vehicles of all kinds... improving them all day. It would be like Iron Man's mansion. Having all that space to myself just to think and do good deeds on cars all day.
Стерильная чистота в ремзоне ,как операционной !
好技術.讚拉
*trying to watch relaxing engine build*
*getting sleepy*
*ad comes on*
“OH OH OH OOOORILEYY!!!”
Lolol
UA-cam premium brother never even heard of this "ad" you speak of
Без слов!!! Кто знает тот поймет. Супер.!!!
My 2006 WRX lasted 325,000 miles before camshaft started knocking. Still on the original clutch.
I'm saving up for a new engine. Probably put a clutch in when I replace engine. Definitely would like to have my engine built her but alas I am in the US. :)
Thanks for the great video
I remember that in the USA the Subaru Boxer from Fuji Heavy Industries were often used in Prop.Aeroplanes. The best boxer type with a minimum of vibrations are the 6 cylinder type as they were build in the Subaru Outback H6 (similar to the Porsche 911 Engine!)
Really nice work, and the workshop looks like a medical center, congratulations!
it is a medical center ;) for boxer engines :D
I felt asleep watching this
Like a doctor working on a patient!
i love how he just has like 3 drawers full of lifter buckets
My only Subaru was a Legacy with an EJ22 engine. It enjoyed driving it. It was a big car that handled more like a supermini.
It gave very little trouble. The water pump bearing collasped at some 100K miles but it did not throw the belt.
This video makes me want to rebuild my engine for the fun of it.
The torque wrench clicks were so good. Is that a 1/2 inch or 3/8 drive torque wrench at around 5 minutes in when you’re torquing the heads?
good job👌
beautiful
Dream job
Klasse Videos! Super Werkstatt! Welche Einlaufpaste nutzt Ihr dort?
Die gute alte Zeit,da war Motorenbau noch einfach.Aber interessantes Video ,weiter so.
I dont know how anyone could build an engine in such dirty, filthy conditions and have it run...lol Great video, thanks !
It will run as long as the dirt don’t get inside it. Even if it does get inside it will still run.
@@StrikerFin I doubt there's even a speck of dust in that shop. You could eat off of any surface in there. I wish my place was that clean.
Very good attention setting the fine tolerance using the feeler gauge on the camshaft. Show that in a even more detailed video...
I thought backing off bolts with a tourqe wrench affected the tourqe wrench after so long?
Deine Videos sind der Hammer,
könnte die den ganzen Tag schauen,
und als ich in einem deiner letzten Videos SU auf dem Nummernschild gesehen habe,
habe ich erst mal im Netz nachgeschaut wo deine Firma ist.
Komme aus Neunkirchen und bin schon zig mal bei dir vorbeigefahren ohne zu wissen das du aus der Nähe kommst.
Mach weiter so
Gruß Markus, der sich sehr für deine Arbeit interessiert
Impact Fein 👍
Very nice job
Love the videos, your workshop and your attention to detail! I wouldn’t get Threebond on your skin though, it’s not nice stuff but I guess you know that already.
wait what??? why?? i use threebond and i dont know that.
Nice work mate. Would love to know the spec’s off this build.
never had seen somany GLUE in my entire life
Have you ever used the Six Star head gaskets?