Cut perfect circles using the Milescraft circle guide DIY

Hi Everyone
Taking a look at the Milescraft ‪@milescraft‬ circle cutting guide
Super easy to use for professional results, purchased from ‪@timbeconaus‬
0:00 Intro (what's in the box)
3:01 Router setup
9:37 Large circle guide
16:41 Small circle guide
18:50 Outro (project finished)
Thanks for watching
#homeonthetools #tools #toolreview #diy #diyproject #diycrafts #wood #milwaukee #milescraft #woodworking #router #timber

[@66slowjoe]

Thanks, that helped a lot

[@bernardmichaud1099]

I purchased this kit on Amazon Canada for a very reasonable price of ~ $55.00 CAD. I adapted it to my Bosh Mr23EVS plunge base router by adding 2 extra holes in the base plate. I made a few experimental bowls and discovered that the very small wood screw that holds the router in place was getting loose as the device was rotating and did not produce accurate circles. I solved the problem by drilling a 4mm hole in the work and using a bolt type screw of 15mm length which gave me a more secure fit and accurate circles. If Milescraft could develop a better way to secure the device other than a 1/2 " wood screw, this jig would be the best router tool on the market.

[@Homeonthetools]

Wow great bargain, agree with the pivot screw it’s rubbish, sounds like you got it sorted 👍🏻

[@michaeldurham3550]

Great Job!
I'm a yank(USA). 1" rules ha! I am retired cabinet, trim, and rough frame carpenter for 40 + years. Your presentation was very simple, clear, and to the point.
Again, good job keep up the good work. Michael

[@Homeonthetools]

Thanks Michael, appreciate the feedback, you guys will find the metric system one day 😂

[@bradleytuckwell4881]

Thanks mate super helpful

[@Homeonthetools]

Glad I could help 👍🏻

[@fixedit8689]

Would be nice if the center pivot would lock so you don’t need to hold it down

[@Homeonthetools]

Yeah I agree, definitely worried it would jump out

[@TheDopalgangr]

At 9:52 you place the wrong end into the base. The instructions say to put the end with the lowest number in there.

[@Homeonthetools]

Thanks for that, I didn’t realise at the time

[@TheDopalgangr]

I watched the manufacturers video again. Still don't get the inside and outside diameter thing. I guess you use the inside diameter for making a hole that size and the outside diameter for making a circle piece if wood that size??@@Homeonthetools

[@thescottishlion]

Doesn't work with DeWalt palm router