I was hesitant about putting the bloopers in, but I’m really glad I did. Seems like everyone really likes that part! I’m definitely going to start adding that section to my videos going forward
Excellent video, haven't installed this yet but I do have the stage 1 & 2 Kspeed packages installed on both of my 2017 310LX ski's with the larger pulley. Love the Kspeed guys they are supper helpful and sell a great product. They suggested swapping out the ride plate for a higher top end, however, when you do this you loose the accuracy of you speedo. Maybe this year I'll work this mod plus the sponsons. The biggest issue with this ski stock is the super charger belt slips over time and you have to either grease it or swap it for the automatic one you discussed in another video. Keep posting, it great to see someone finally putting out some good content on the 310's
Kelly, great comment- thank you for posting! Yes, that pivot bushing does need constant attention - especially if you ride in salt. The Kawi Performance auto tensioner is a really nice part- I’m very happy with it so far. You can always add a zirk fitting to your stock tensioner too so you can keep it greased.
@@JDsWaterWorld I'm pretty sure I don't have fingernails. I just have fibreglass shards. The old ski's didn't do that, the new ones sting you a lot easier.
Hahaha they sting pretty bad when they get you. Yeah, my STX 1100 seems like it has more polyester resin on the inside of the hull- making the surface smoother.
I have to give it to K-Speed, once again a mod that looks like a work of art. Great content like always JD. Thanks again. Oh and like others loved the bloopers, sh*t happens my brother. Billy D
First of all it looks awesome and is literally a work of art..secondly it basically supports increased fuel flow for the stage 1 mods including the pulley and tune.
Hi JD, quick question, I just got a supercharged ski, the new 310lx can I use fluid film as a fogger? Or. Has to be WD40 Or Has To Be a Special Fogger Like AMSOIL Fogger Spray Or similar? Thanks love your videos!!
Don’t use fluid film!!! WD-40 is great for its hydrophobic properties, also Lear Corrosion Block works great. I find the “engine fogging oils” are thicker and stickier and gum up the intercooler..WD-40 is a safe bet!
great video but i cant believe you have a Philips socket and not an Allen socket. if you have to label the injection wires you most likely should not be working on your own ski. but very informative.
This video is geared towards showing consumers how they can install this product, and it’s important for consumers to know that they should not mix up the plug wires for the fuel injectors. No matter how well I know a machine, I always label wires and harness connectors- it’s a best practice to ensure silly mistakes are avoided.
Thanks for leaving in the blooper. It reminds us of being human.
Haha I normally have 3 or 4 for each video but this was the first time I included them! Glad you liked it, I thought it was funny
😅🤣😂 The blooper reel is like my daily life!!! Great video JD! Thanks for posting!
I was hesitant about putting the bloopers in, but I’m really glad I did. Seems like everyone really likes that part! I’m definitely going to start adding that section to my videos going forward
Good job JD. That really does look good in the engine bay compared to the OEM fuel rail.
Those bloopers 😂🤣
Hahah I figured it’s OK to be human
Im so glad you were able to do this video. I want this mod now..... badly!
Guess I have to add this to the list as well lol
Thanks👍🏻
Yes, it looks awesome and supports the rest of the Kspeed mods!
Excellent video, haven't installed this yet but I do have the stage 1 & 2 Kspeed packages installed on both of my 2017 310LX ski's with the larger pulley. Love the Kspeed guys they are supper helpful and sell a great product. They suggested swapping out the ride plate for a higher top end, however, when you do this you loose the accuracy of you speedo. Maybe this year I'll work this mod plus the sponsons. The biggest issue with this ski stock is the super charger belt slips over time and you have to either grease it or swap it for the automatic one you discussed in another video. Keep posting, it great to see someone finally putting out some good content on the 310's
Kelly, great comment- thank you for posting! Yes, that pivot bushing does need constant attention - especially if you ride in salt. The Kawi Performance auto tensioner is a really nice part- I’m very happy with it so far. You can always add a zirk fitting to your stock tensioner too so you can keep it greased.
Great Job, love the bloopers. #jetskilife
Haha If I had a video clip for every time I dropped a washer or nut and then spent 20 minutes trying to fish it out - I’d have a very, very long video
@@JDsWaterWorld I'm pretty sure I don't have fingernails. I just have fibreglass shards. The old ski's didn't do that, the new ones sting you a lot easier.
Hahaha they sting pretty bad when they get you. Yeah, my STX 1100 seems like it has more polyester resin on the inside of the hull- making the surface smoother.
I have to give it to K-Speed, once again a mod that looks like a work of art. Great content like always JD. Thanks again. Oh and like others loved the bloopers, sh*t happens my brother.
Billy D
Haha thanks Billy! Yes, I have not been disappointed yet by anything from Kspeed- I’m actually running out of parts to buy L O L!
@@JDsWaterWorld lol, I’m Jamie & crew can work something out! 😁
Another quality vid.. keep ‘em coming! 🤘😎
What is the advantage to this mod? Excellent video btw man.
First of all it looks awesome and is literally a work of art..secondly it basically supports increased fuel flow for the stage 1 mods including the pulley and tune.
Hi JD, quick question, I just got a supercharged ski, the new 310lx can I use fluid film as a fogger? Or. Has to be WD40 Or Has To Be a Special Fogger Like AMSOIL Fogger Spray Or similar? Thanks love your videos!!
Don’t use fluid film!!! WD-40 is great for its hydrophobic properties, also Lear Corrosion Block works great. I find the “engine fogging oils” are thicker and stickier and gum up the intercooler..WD-40 is a safe bet!
@@JDsWaterWorld got it so for now I use wd40 to fogg
great video but i cant believe you have a Philips socket and not an Allen socket. if you have to label the injection wires you most likely should not be working on your own ski. but very informative.
This video is geared towards showing consumers how they can install this product, and it’s important for consumers to know that they should not mix up the plug wires for the fuel injectors. No matter how well I know a machine, I always label wires and harness connectors- it’s a best practice to ensure silly mistakes are avoided.