Very nice, I always get great ideas from your channel. I'm the first owner of a 2003 Chevy that needs a wee bit of attention and I see this swap coming.
I swapped in the same console/seat into my 2007 Avalanche. The original one had no storage and 2 cup holders. No I have storage in the top and the bottom and I have 3 cup holders! I got lucky and got one from a 2013 Silverado and it’s the same color as my seats. I also ran a power and ground wire with an inline fuse from the battery to the charging port in the bottom storage. Very happy with the swap!
@@TWAMotorsports yeah, I wired the outlet probably a year ago and haven’t used it not even once lol. But it’s there if I ever need it. I definitely love the console as well, definite improvement over the original one.
I love it when I see toothbrushes and microfiber towels in your videos, I know something is about to get squeaky clean and detailed😎!! Vinyl floor looks like new, I love super clean and LA Awesome from the dollar store is some good stuff too.. Like the two storage areas in the console..✌🏻
So I just picked up a jumpseat/console for my 07 Classic crew. A nice little surprise (that I may have missed in your video if it was mentioned) is that there's a pop out cup holder on the back for rear passengers! Dope!
Good Friday afternoon Travis.. I'm just watching your video on console swap to mower truck.. I'm going to be installing my rear Detroit locker tru trac this afternoon. In my 94 project trans am... 👍
My 04 gmc sierra the old arm rest was breaking and woulf pinch my arm at times. I made a new arm rest or lid part out of 2 pieces of 3/4 plywood. Stained it and clear coat. Looks sweet with the rest of the wood trim the truck has. 😊
@TWAMotorsports I would share a picture. But obviously we can't on comment section. It looks like the old arm rest you pulled out. Just made from wood with the cutout in the top and locks down with the original push to open button.
I just bought one for 10 bucks. Yes it’s identical to this one. Could use some touch up on the legs but overall decent with the exception of the latch’s being busted.
On the plastic you tube how to make plastic new with blow torch you go over it it fast with the torch and it knocks that out like new . Detailers do it to the inside of back hatches and door panels from getting beat up
They do sell the lids online. Theres the third party versions on the likes of Amazon or eBay. And theres also some of the GM dealers from other states that have their own websites that sell OEM parts for cheaper than MSRP.
I have one for my 03 GMC Sierra single cab here in Florida they run 250-350 I paid 40 for mine out of a rolled 07 4 door truck Amazon has lids but you have to take the four screws out of the plastic under the lid and the hinge put on new lid
Yessir I’m about to order a lid I have new latches for mine as well just need to install them still lol my truck is in the shop getting a stage 2 cam 6.0 4l80e posi rear end can’t wait to get it back the lowering it another set of black wheels and paint I have a shaved tailgate also
I just did this swap on my 99 rcsb. Same exact color jumpseat too lol I believe your old sierra seats would be a closer color match to that jump seat. Unfortunately I still have the ugly work truck seats in mine. Another great video Travis 👍
I’m rebuilding a 98 k1500 Suburban slt. Everyone thinks I’m looney tunes with the gas prices. But for a purchase price of $500… and everything is solid and passes smog. Why not. The interior is toast mostly. Where do you shop for Carpet and headliners! Thanks
What’s the process you use for your cleaning rags? Do you wash them? Throw them away? Main cleaner you use? Super clean and Simple green? Just curious how many rags you go through. Great video.
Can you upload a video if you hardwired the harness of the jump seat to make the cigarette lights to work so I can connect or charger or use them if needed? I’m curious on how to hardwire them or if you have a link , I would appreciate it.
This is a smooth looking swap. If you have a moment, could you measure the width, length, and height from the floor of the top? I’m considering a “non-standard” install 😉 Thanks!
Can anybody tell me what I need to do to switch my 03 Chevy seats out Like what is compatible And how to clear and avoid codes My driver side seat is worn out!!
Thanks Travis for another great video, my 04 Yukon has the front seat but not the extra storage and cup holders, so I'll keep this swap in mind. Also I did the drop on my Yukon with the parts from your video of the white tahoe, I have the back sitting at 33" inch to fender from floor and the front 32.5" inch via the 2 in spindle, torsion bar adjustment new upper a arm and still using stock keys and I replaced the front shock to a stock AC Delco, but the ride is still bouncy, should I try replacing the remaining front suspension components, lower control arm, tie rods, links ect. I'm looking at the MOOG problem solver parts, or do you think a coilover front upgrade? Or both Sorry for the long comment but I know your expertise in these trucks and need advise before the wife loses faith in my ability to have a normal riding truck 🤣 Keep up all the great content!
I did coil overs for the front of my 2012 yukon and dropped it without the spindle, just the coilovers them selfs dropped it. It rides pretty good. I put belltech coil overs worth the money. I just had to buy there anti camber parts. Cuz the tires did a slight camber after the drop.
And all the junk, change, keys, pens, you name it gets blended into one ungodly mess. Probably the reason the one that came in my 2008 2500 hasn’t been up in about 12 years. Do like the fact that the bottom half locks. Anybody know if this combo will fit between the seats in a 2002 3500 base model in place of the jump seat.? Looks kind of wide.
Very nice, I always get great ideas from your channel. I'm the first owner of a 2003 Chevy that needs a wee bit of attention and I see this swap coming.
Slow and Steady
I swapped in the same console/seat into my 2007 Avalanche. The original one had no storage and 2 cup holders. No I have storage in the top and the bottom and I have 3 cup holders! I got lucky and got one from a 2013 Silverado and it’s the same color as my seats. I also ran a power and ground wire with an inline fuse from the battery to the charging port in the bottom storage. Very happy with the swap!
If I thought I would use the outlet I may have wired it. Definitely love the console though
@@TWAMotorsports yeah, I wired the outlet probably a year ago and haven’t used it not even once lol. But it’s there if I ever need it. I definitely love the console as well, definite improvement over the original one.
Agreed
You have a video on how to do that or somewhere you recommend? I got a 2018 jump seat and want to run power to it
Run it from cigarette lighter under radio
Definitely a very quick upgrade, great installation.
Thank you. It was worth it
@@TWAMotorsports off of what year was the new console?
2007 up
@@TWAMotorsports thanks. Did you have to modify the brackets?it looks great…
No. It drops right in
Awesome! Had no idea this was a str8 across swap. Now to find me one in grey! 🙌
Thank you. It is a direct swap
I love it when I see toothbrushes and microfiber towels in your videos, I know something is about to get squeaky clean and detailed😎!! Vinyl floor looks like new, I love super clean and LA Awesome from the dollar store is some good stuff too.. Like the two storage areas in the console..✌🏻
Thank you. It is really a problem. Lol
@@TWAMotorsports it's a good one to have!! ✌🏻
Not sure
@@TWAMotorsports 🤣
So I just picked up a jumpseat/console for my 07 Classic crew. A nice little surprise (that I may have missed in your video if it was mentioned) is that there's a pop out cup holder on the back for rear passengers! Dope!
Nice. Yes it has a cup holder in the rear
Good Friday afternoon Travis.. I'm just watching your video on console swap to mower truck.. I'm going to be installing my rear Detroit locker tru trac this afternoon. In my 94 project trans am... 👍
Nice Keith. Sounds like fun
My 04 gmc sierra the old arm rest was breaking and woulf pinch my arm at times. I made a new arm rest or lid part out of 2 pieces of 3/4 plywood.
Stained it and clear coat. Looks sweet with the rest of the wood trim the truck has. 😊
Interesting
@TWAMotorsports I would share a picture. But obviously we can't on comment section. It looks like the old arm rest you pulled out. Just made from wood with the cutout in the top and locks down with the original push to open button.
👍
@TWAMotorsports I seen you have email and sent a couple pictures.
@2dogslarry393 I got them
I did this same swap on my 00 and I got lucky with the key for the bottom
Nice. Key would have been nice
It's looking good Travis. I changed out my center console on my tahoe back in 2016 when i changed out the interior
Thank you. Much better I think
@@TWAMotorsports it does maybe i should get a nbbs console on my nbs
I like it
I just bought one for 10 bucks. Yes it’s identical to this one. Could use some touch up on the legs but overall decent with the exception of the latch’s being busted.
Pretty decent shape for sitting on the ground for 3 years under a tree
Nice
Definitely a good price
I just pulled the seats out of my 2010 Sierra to clean 🥳
Lol. That's where it starts
great mod! love the process, hopefully doing this to my nbs very soon!
Thank you
On the plastic you tube how to make plastic new with blow torch you go over it it fast with the torch and it knocks that out like new . Detailers do it to the inside of back hatches and door panels from getting beat up
I have done that for scratches in the past
They do sell the lids online. Theres the third party versions on the likes of Amazon or eBay. And theres also some of the GM dealers from other states that have their own websites that sell OEM parts for cheaper than MSRP.
Probably needs one
I have one for my 03 GMC Sierra single cab here in Florida they run 250-350 I paid 40 for mine out of a rolled 07 4 door truck Amazon has lids but you have to take the four screws out of the plastic under the lid and the hinge put on new lid
They are crazy priced on ebay. I do need a lid.
Yessir I’m about to order a lid I have new latches for mine as well just need to install them still lol my truck is in the shop getting a stage 2 cam 6.0 4l80e posi rear end can’t wait to get it back the lowering it another set of black wheels and paint I have a shaved tailgate also
Nice
Like it it came out clean
Thank you
I just did this swap on my 99 rcsb. Same exact color jumpseat too lol I believe your old sierra seats would be a closer color match to that jump seat. Unfortunately I still have the ugly work truck seats in mine. Another great video Travis 👍
Thank you. They would be a closer match probably
I’m rebuilding a 98 k1500 Suburban slt. Everyone thinks I’m looney tunes with the gas prices. But for a purchase price of $500… and everything is solid and passes smog. Why not. The interior is toast mostly.
Where do you shop for Carpet and headliners!
Thanks
They go forever if taken care of.
What’s the process you use for your cleaning rags?
Do you wash them?
Throw them away?
Main cleaner you use?
Super clean and Simple green?
Just curious how many rags you go through.
Great video.
Only used three here. Buy a new pack for paint. Cycle to interior after washing. Throw some heavy soiled away
Inside the top console there suppose to have a divider that way you don’t have that problem with the little mats sliding mine luckily has it
Before I vleaned it all the goo kept it in place. Lol
@@TWAMotorsports haha should’ve left the goo
Lol. Probably
Can you upload a video if you hardwired the harness of the jump seat to make the cigarette lights to work so I can connect or charger or use them if needed? I’m curious on how to hardwire them or if you have a link , I would appreciate it.
Sorry but not making a video for that
I’m on Amazon trying to find that bottom piece with the key. What is the name of it?
Doubtful you will find it there
First question, does this center console fit in a 2005 gmc sierra 1500? Next question, where did you get that center console?
Yes. Local salvage
Nice. Wanting to switch to buckets and jumpseat in my OBS
That will be a nice upgrade
This is a smooth looking swap. If you have a moment, could you measure the width, length, and height from the floor of the top? I’m considering a “non-standard” install 😉
Thanks!
Sold it or I would
@@TWAMotorsports thanks!!
I love this and had to subscribe
Thank you
Are the seat mounts the same too?
Yes
Does it fit right in place? I seen people that had to weld the brackets
Not with this one. Fits like stock
Does anyone know if this will work with the 5 speed transmission?
It should
Will this fit my GMC Sierra 1500 2000? Is this direct fit?
Yep
its a direct bolt in? from what years? thanks
Yes. 07-13
Thank you for this series…
What’s the law of flipping cars in your state
Thank you. No real laws on that
Will this fit in a 2000 Chevy regular cab
Yes
What year truck did you get the console from?
2007 to 2013
would your consider a 2015+ jumpseat in a nbs?
That's a good console too
Can anybody tell me what I need to do to switch my 03 Chevy seats out
Like what is compatible
And how to clear and avoid codes
My driver side seat is worn out!!
99 to 07 or 03 to 07 classic are direct plug in
@@TWAMotorsports I am specifically looking for leather with lumbar support
Any advice?
Tahoe seats
If I were to swap the seats from my 04 with the seats off an 07-13 will they fit without making any adjustments?
Should fit but no idea
Will fit but won't have seatbelts the 99-06 have them built into the seat I wanted to swap them in my 04
Correct
Will this swap work on a 2005 Chevy 2500 single cab?
Yes
Will these works on stick shift2001
It should
Looks good great video
Thank you Daniel
What year did that center console come from
2007 to 2013
Thank you oh and i jusy got my And tend to delete For the cowl That was an awesome mod too didn't know anything about it till I saw your video
That shouldn't said antenna
Thanks Travis for another great video, my 04 Yukon has the front seat but not the extra storage and cup holders, so I'll keep this swap in mind. Also I did the drop on my Yukon with the parts from your video of the white tahoe, I have the back sitting at 33" inch to fender from floor and the front 32.5" inch via the 2 in spindle, torsion bar adjustment new upper a arm and still using stock keys and I replaced the front shock to a stock AC Delco, but the ride is still bouncy, should I try replacing the remaining front suspension components, lower control arm, tie rods, links ect. I'm looking at the MOOG problem solver parts, or do you think a coilover front upgrade? Or both Sorry for the long comment but I know your expertise in these trucks and need advise before the wife loses faith in my ability to have a normal riding truck 🤣 Keep up all the great content!
That could help. It will never ride like stock after a drop but good shocks really help
I did coil overs for the front of my 2012 yukon and dropped it without the spindle, just the coilovers them selfs dropped it. It rides pretty good. I put belltech coil overs worth the money. I just had to buy there anti camber parts. Cuz the tires did a slight camber after the drop.
Yeah dropping without spindles will always cause an alignment issue
The problem with these though is if you have the seat up you lose the cup holders.
That's true
Yeah but if you are using the cup holders on the older style it's hard for someone to sit in the middle
True
@@michaelford4387 the dog usually sits there.
And all the junk, change, keys, pens, you name it gets blended into one ungodly mess. Probably the reason the one that came in my 2008 2500 hasn’t been up in about 12 years. Do like the fact that the bottom half locks. Anybody know if this combo will fit between the seats in a 2002 3500 base model in place of the jump seat.? Looks kind of wide.
Do like 303?
Never tried it
It’s like a dressing but leaves no greasy type residue. Matte finish. Lots of pro detailers use it. Which is how I found it.
I have seen it but just never tried
What does NBS mean? I keep forgetting, lol. Awesome video, good work.
New Body style
@@TWAMotorsports thank you! I wonder if “Plastix” or other plastic restorer could help with those burn marks…
Probably could sand them and make it look new
Nice video
Thank you
maybe don't grab the cup by the lid 🤔😅
I grab my lid with my cup
Probably so. Grande nitros don't give any cup to grab in that old style cup holder. Lol
@@TWAMotorsports ok you got me there 😂
🤣
Might have been more aptly named as a detailing video
Maybe so
Was better carpet or that black vinyl you have
Vinyl
Looks good I'ma do that on my 2000 thanks for the video
Thank you. Way better console in my opinion
You sure this ain’t a video on how to clean your console
That too