Saved myself three hundred buck to go to the dealer and have them do it. The two pigtails cost $42 and about an hour labor. Worth it. Thanks for the help.
I just did this using your video and it took me about 35mins. The hardest part is trying to reseat the brake light. No matter how much you try to match it up, it doesn't want to go in right. Such a giant PITA. My brake light has burnt out yearly for the last 10 years and I was over it, so changed the entire harness. I'm sure the other one is next. THANKS!
Just blew my left side out had to drive 640 mile with a flash light back from vacation. Got the pigtails today hopefully with this video i can have tail lights again
Bro i loved the "5 minutes later" because that timer period was when I realized I needed to get some advice for myself. I deconstructed all kind of shit to see if I could get around that plug point but after watching your video I just ripped that mf out with plyers and some force like you did. Great thanks for posting this video!
If your car is stuck in Park after trying to change your tail light pigtail or bulbs watch this video "2013 Hyundai Sonata Stop Light Switch Replacement, Fuse Locations". You probably burned a fuse and it is usually the 15 amp fuse below the hood of your car. The video shows it where it is! Hope this help someone who had the same problem as I did.
Hey guys another update, apparently there is a recall by Hyundai for these pigtails! So check your local area and see if you can get them to foot the bill!
Contacted the “stealership”. They replaced both sides for free!! However just a few months prior when I brought the car in because of this issue, they were going to charge me $854 just for the right side!! SMDH!
No problem man, If you get the same one I got make sure you replace the bulbs that come with the pigtail because they are garbage. I switched all of mine over to LEDs and I will have a video coming out on that soon as well. Pretty basic though. If you're going to switch out the Pigtail it would be easiest to switch the bulbs at the same time. Good luck man thanks for watching!
I purchased it from your supplied link and have discussed that with the wife and that's what we're going to do. I did notice how hot those lights got in the sockets in fact one of them instead of being gray it is already turning it brown from the heat.
@@WillNC Yeah I used the supplied bulbs and within a few days a few of them had already burnt out, I put in the LEDs and so far its been a night and day difference. Plus the LEDs are more responsive. Thanks for helping out the channel man I appreciate you and your support. Please message back and let me know how it all turns out.
Hey Guys UPDATE, If you are changing out the wiring hardness I HIGHLY suggest not using the bulbs that come with the pigtail set, they are garbage. If you're spending the money to switch out the whole pigtail spend a few extra bucks and get some LED brake/tail lights a long with the LED mini bulbs. I will be posting a video in the next few days to show you the difference. It not only looks better but they are also supposed to last longer. The bulbs the kit comes with burn out super fast and have the potential to ruin the bulb sockets on the new pigtail. Ill post the links for the LED bulbs used in my videos. THANKS FOR WATCHING AND GOOD LUCK! Brake/Tail Light bulb: amzn.to/3UrpKVE LED Mini Bulbs: amzn.to/3O1hf1B
The pigtail was so cheap, it might be cheaper for me to replace it again than to replace the lights. And, if you get LEDs, make sure they’re street legal.
@@LetsRepair I bought LEDs, but returned them when I saw that they said “off-road only” on them. My understanding is that it’s possible cops could pull you over for your tail lights being too bright (I’m sure that’s a long shot, but I don’t need to give a cop a reason to pull me over). Also, I read that if you get into an accident, it’s possible having off-road LEDs could affect insurance coverage and/or any lawsuit that comes out of the accident. The risks are probably small, but why have the risks when it’s easy to not use off-road LEDs as tail lights.
Hey Amanda are you sure that’s not just your “tail lights” it’s the same bulb that does both function. Maybe have someone hit the brakes while you’re behind the car and see if they get brighter. Because when your headlights are on your running lights and tail lights should be on as well. Along with the yellow side markers. Hope this helps!
Thanks for the video. Went exactly as you described. Also having an issue with the drivers side electronic seat adjustment. It does everything but lower the seat. Any thoughts or suggestions?
Hey Tim I haven’t had any problems with my seat, but first thing that comes to mind is either the switch mechanism or maybe something under the seat? Does the seat make noise but not go down?
That seat switch is a known problem. I’ve replaced mine twice…2014 Sonata. Mine would move the seat in all directions except down…both times…same issue.
man i got 2 of those wire harnesses for a 2011 hyundai sonata , first of all the sockets do not fit a 2011 , but they will suffice . second issue , when the lights are in the off position the brake lights come on when i engage the brakes, , but when i turn the lights on for night driving the brake lights are stuck on as if i am actually braking , when i hit the brake nothing happens. also no lights engage when putting the car in reverse . i dont know if i should send it back what .. any help would be appreciated . thanks
So the brake lights will always come on when the brakes are hit whether the lights are on or not, I would say to go through the wiring again and make sure everything is connected correctly and that the bulbs aren’t bad and make sure you have the correct bulbs in the brake light sockets they should be dual filaments or LEDs if none of that works I would exchange them and try again. Hope this helps brother let me know.
@@LetsRepair yeah i checked everything and I tried just one of the new ones in and one of the old ones and when I wiggle the led bulb around in the socket the the brake lights come on including the light in the middle by the window. So I am concluding that this harness is a no-go for the 2011 Hyundai. I am sending the harness back and getting another set that actually fits the 2011. I'll follow up here thanks for all your help
@@johnjoe_247i have the same problem with my 2011 and I’m having a hard time finding the correct replacement. I know it’s a long shot because I’m 8 months late, but did you ever fix it on your end?
I have the 2013 and just replaced the wiring harness for the same short in wire and when doing so I realized the bulbs were getting so how they have melted the housing so now I have to replace the entire tail light assembly.
Yeah I had to do that a few years back because the bulb warped the whole housing, I switched all my bulbs over to LEDs and that has helped a ton too. Maybe try that so it doesn’t happen again. Best of luck to you! Thanks for watching!
Honestly they are so cheap I would just replace them all but it’s your call, but if you do one brake light to LED do the other as well because the LED will activate faster than the regular bulbs.
Not to criticize, but this takes a 5-10 minute job and adds about 20 minutes to it. There’s no need to remove the tail light from the car. I’ve replaced both sides of my 2011 Hyundai Sonata without removing it. But if it’s easier for you to do it that way, it’s still a quick job.
I agree, there are a ton of ways to do it faster, but for the sake of training someone how to do it that has maybe never touched a tool in their life this is the best way I could think of lol.
Yeah I was gonna say the same thing. It seems like in every video they take out the entire light... it's so much easier to unclip the harness- no tools needed!
I've been helping my son replace break lights on his on a regular basis leaving the assembly in, and when I came here finally ready to just change the harness because tge sockets slightly burnt and tired of prying a melted bulb out; I 100% am taking the entire assembly out. Never had a vehicle with more annoying connections. Can't wait to Curse the harness connector this weekend as I rage rip it out
Check with the local dealer, I heard there was a recall on the pigtails they may replace it for free. But ever since I replaced mine in this video, and used LEDs I haven’t had a problem.
Same thing me had to go through Hyundai 50 bucks that’s why I hate dealing with dealers. They will to replace parts you don’t need so thankfully I have A qualified retired mechanic does my work. He don’t charge arm and and a leg!
Hey everyone! At the time of writing this I only need 9 more subscribers to hit 1000! 🎉🎉
Saved myself three hundred buck to go to the dealer and have them do it. The two pigtails cost $42 and about an hour labor. Worth it. Thanks for the help.
I just did this using your video and it took me about 35mins. The hardest part is trying to reseat the brake light. No matter how much you try to match it up, it doesn't want to go in right. Such a giant PITA. My brake light has burnt out yearly for the last 10 years and I was over it, so changed the entire harness. I'm sure the other one is next. THANKS!
Just blew my left side out had to drive 640 mile with a flash light back from vacation. Got the pigtails today hopefully with this video i can have tail lights again
“Highly suggest” is just such a great phrase.
Bro i loved the "5 minutes later" because that timer period was when I realized I needed to get some advice for myself. I deconstructed all kind of shit to see if I could get around that plug point but after watching your video I just ripped that mf out with plyers and some force like you did. Great thanks for posting this video!
Haha thanks for watching bud I appreciate the support. Sometimes you just gotta give it the good ole 1 2 lol.
Door panel remover popped it right off for me pretty easy
SAME!
Thanks you made this look so easy. And thanks for posting all the products. Doing it assoon as pigtail arrives.
Hey Paty thank you so much for commenting and supporting my channel I appreciate you very much!
Thanks for the video, my good sir. Much appreciated.
Great video! Love the pink gloves! Thank you for sharing such helpful information!!!!!
You are so welcome!
If your car is stuck in Park after trying to change your tail light pigtail or bulbs watch this video "2013 Hyundai Sonata Stop Light Switch Replacement, Fuse Locations". You probably burned a fuse and it is usually the 15 amp fuse below the hood of your car. The video shows it where it is! Hope this help someone who had the same problem as I did.
Hey guys another update, apparently there is a recall by Hyundai for these pigtails! So check your local area and see if you can get them to foot the bill!
ARE U SERIOUS??!! I’ve been having this problem & was just about to order the kit! It’s July 4th guess I’ll wait til 2mrw & find out. Thx😊
If I replaced the wiring with a new one, and it still does not work, is it possible I just bought bad wiring?
@@sydneyholady7095 yes , are none of the. Lights working or just 1
Contacted the “stealership”. They replaced both sides for free!! However just a few months prior when I brought the car in because of this issue, they were going to charge me $854 just for the right side!! SMDH!
Thanks for the detailed tutorial. Have to do the same thing on the wife's car on the passenger side.
No problem man, If you get the same one I got make sure you replace the bulbs that come with the pigtail because they are garbage. I switched all of mine over to LEDs and I will have a video coming out on that soon as well. Pretty basic though. If you're going to switch out the Pigtail it would be easiest to switch the bulbs at the same time. Good luck man thanks for watching!
I purchased it from your supplied link and have discussed that with the wife and that's what we're going to do. I did notice how hot those lights got in the sockets in fact one of them instead of being gray it is already turning it brown from the heat.
@@WillNC Yeah I used the supplied bulbs and within a few days a few of them had already burnt out, I put in the LEDs and so far its been a night and day difference. Plus the LEDs are more responsive. Thanks for helping out the channel man I appreciate you and your support. Please message back and let me know how it all turns out.
@@LetsRepair you bet.
Harness's came in. Replaced them both and changed the lights to LEDs. Looks good. Wife is happy. Happy wife, happy life. Thanks for the video.
Hey Guys UPDATE, If you are changing out the wiring hardness I HIGHLY suggest not using the bulbs that come with the pigtail set, they are garbage. If you're spending the money to switch out the whole pigtail spend a few extra bucks and get some LED brake/tail lights a long with the LED mini bulbs. I will be posting a video in the next few days to show you the difference. It not only looks better but they are also supposed to last longer. The bulbs the kit comes with burn out super fast and have the potential to ruin the bulb sockets on the new pigtail. Ill post the links for the LED bulbs used in my videos. THANKS FOR WATCHING AND GOOD LUCK!
Brake/Tail Light bulb: amzn.to/3UrpKVE
LED Mini Bulbs: amzn.to/3O1hf1B
The pigtail was so cheap, it might be cheaper for me to replace it again than to replace the lights. And, if you get LEDs, make sure they’re street legal.
@@moniphil good point some cities may have limits on the leds, thanks for adding that man. 👊
@@LetsRepair I bought LEDs, but returned them when I saw that they said “off-road only” on them. My understanding is that it’s possible cops could pull you over for your tail lights being too bright (I’m sure that’s a long shot, but I don’t need to give a cop a reason to pull me over). Also, I read that if you get into an accident, it’s possible having off-road LEDs could affect insurance coverage and/or any lawsuit that comes out of the accident. The risks are probably small, but why have the risks when it’s easy to not use off-road LEDs as tail lights.
Question. My break lights work fine, but when I turn on the headlights the break lights stay on? What could it be?
Hey Amanda are you sure that’s not just your “tail lights” it’s the same bulb that does both function. Maybe have someone hit the brakes while you’re behind the car and see if they get brighter. Because when your headlights are on your running lights and tail lights should be on as well. Along with the yellow side markers. Hope this helps!
Thank you for sharing. My lights are out. I've changed the bulbs and a fuse but still nothing. I'm going to try this next.
Let me know how it goes!
Thanks for the video. Went exactly as you described. Also having an issue with the drivers side electronic seat adjustment. It does everything but lower the seat. Any thoughts or suggestions?
Hey Tim I haven’t had any problems with my seat, but first thing that comes to mind is either the switch mechanism or maybe something under the seat? Does the seat make noise but not go down?
That seat switch is a known problem. I’ve replaced mine twice…2014 Sonata. Mine would move the seat in all directions except down…both times…same issue.
Thanks for this man! My daughters car is having this problem. Your original link is unavailable. I got a similar one.
No problem man glad I could help!
man i got 2 of those wire harnesses for a 2011 hyundai sonata , first of all the sockets do not fit a 2011 , but they will suffice . second issue , when the lights are in the off position the brake lights come on when i engage the brakes, , but when i turn the lights on for night driving the brake lights are stuck on as if i am actually braking , when i hit the brake nothing happens. also no lights engage when putting the car in reverse . i dont know if i should send it back what .. any help would be appreciated . thanks
So the brake lights will always come on when the brakes are hit whether the lights are on or not, I would say to go through the wiring again and make sure everything is connected correctly and that the bulbs aren’t bad and make sure you have the correct bulbs in the brake light sockets they should be dual filaments or LEDs if none of that works I would exchange them and try again. Hope this helps brother let me know.
@@LetsRepair yeah i checked everything and I tried just one of the new ones in and one of the old ones and when I wiggle the led bulb around in the socket the the brake lights come on including the light in the middle by the window. So I am concluding that this harness is a no-go for the 2011 Hyundai. I am sending the harness back and getting another set that actually fits the 2011. I'll follow up here thanks for all your help
@@johnjoe_247i have the same problem with my 2011 and I’m having a hard time finding the correct replacement. I know it’s a long shot because I’m 8 months late, but did you ever fix it on your end?
I have the 2013 and just replaced the wiring harness for the same short in wire and when doing so I realized the bulbs were getting so how they have melted the housing so now I have to replace the entire tail light assembly.
Yeah I had to do that a few years back because the bulb warped the whole housing, I switched all my bulbs over to LEDs and that has helped a ton too. Maybe try that so it doesn’t happen again. Best of luck to you! Thanks for watching!
Do I need to replace every light with LEDS or just the brake light?
Honestly they are so cheap I would just replace them all but it’s your call, but if you do one brake light to LED do the other as well because the LED will activate faster than the regular bulbs.
Not to criticize, but this takes a 5-10 minute job and adds about 20 minutes to it. There’s no need to remove the tail light from the car. I’ve replaced both sides of my 2011 Hyundai Sonata without removing it. But if it’s easier for you to do it that way, it’s still a quick job.
I agree, there are a ton of ways to do it faster, but for the sake of training someone how to do it that has maybe never touched a tool in their life this is the best way I could think of lol.
Yeah I was gonna say the same thing. It seems like in every video they take out the entire light... it's so much easier to unclip the harness- no tools needed!
I take it off because it's easier than trying to squeeze my hands and fingers in there. Also wouldn't be much to see if his hands are in the way.
I've been helping my son replace break lights on his on a regular basis leaving the assembly in, and when I came here finally ready to just change the harness because tge sockets slightly burnt and tired of prying a melted bulb out; I 100% am taking the entire assembly out.
Never had a vehicle with more annoying connections. Can't wait to Curse the harness connector this weekend as I rage rip it out
Check with the local dealer, I heard there was a recall on the pigtails they may replace it for free. But ever since I replaced mine in this video, and used LEDs I haven’t had a problem.
Ok nice video, but the dealership factory brand charged me $49.50. that's twice as much. And I couldn't get it through anyone else.
Im sorry to hear that, we’re you at least able to get it in and fix the issue?
@@LetsRepair yes it's working fine for now and I use the grease also.
Same thing me had to go through Hyundai 50 bucks that’s why I hate dealing with dealers. They will to replace parts you don’t need so thankfully I have A qualified retired mechanic does my work. He don’t charge arm and and a leg!
They wiring harness is available from Amazon. I paid $24.00 for each…both sides are the same…at least from Amazon.
Same For me went through dealership Right at Fifty dollars!