HYUNDAI Sonata TAIL LIGHT Not Working - How to Replace the Taillight Wire Harness on a Hyundai / KIA
Вставка
- Опубліковано 23 сер 2024
- In this video I’ll show you how to replace burnt out tail light bulb sockets on a 2011 to 2014 Hyundai Sonata or Kia Optima. If your taillight bulbs do not work or constantly burn out , you may need to replace the light bulb sockets/wire harness. Replacing the tail light wire harness is fairly simple. Do it yourself and save money!
I hope this video helped you. Please don't forget to LIKE and SUBSCRIBE. Thanks for Watching!
Get FREE unlimited Shipping, Movies and more - amzn.to/3jbgbsH
Click on the Links below to purchase:
*Tail Light Bulb Sockets and Wire Harness - amzn.to/3yajusg
*Sylvania 2357 Long Life Tail /Brake Light Bulbs - amzn.to/3h57xin
*Sylvania 1156A Long life Turn Signal Light Bulbs - amzn.to/3II3VNm
*Sylvania 168 Light Bulbs - amzn.to/3ZFgv6V
*Milwaukee Fuel High Speed Cordless 3/8 Ratchet - amzn.to/3rlvmov
*Channellock Long Nose Pliers - amzn.to/41EU5od
*Craftsman 3/8 inch Socket Set - amzn.to/3rp5mIT
*Craftsman 1/4 inch Drive Socket Set - amzn.to/3M5lcRO
*Craftsman Screwdriver Set - amzn.to/3l6BcYn
*Craftsman Mechanics Tool Set - amzn.to/3bdiCql
*Nitrile Disposable Gloves - amzn.to/2RO0kqi
*Gojo Hand Cleaner - amzn.to/2HgIuXF
*Shop Towels - amzn.to/2ZQvnTs
*Fixin To T-shirt - amzn.to/33OgqTg
*Car Guy T-shirt - amzn.to/37JpfRS
* Fixin It is an Amazon Associate and earns from Qualifying Purchases.
email: fixinit7@gmail.com
Instagram: / fixin_it_
TikTok: vm.tiktok.com/...
#fixinit #hyundai #tailights #kia #hyundaisonata #kiaoptima #wireharness
Disclaimer:
Due to factors beyond the control of Fixin It, I cannot guarantee against improper use or unauthorized modifications of this information. Fixin It assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Fixin It recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Fixin It, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Fixin It.
One note. You may want to replace the 2357 taillight bulb with an 1157. I did. The 1157s burn cooler and are still plenty bright. As I under stand it…the 2357 bulbs are too hot for the socket assembly plastic. I’ve had trouble with mine (2014) for the last 5 years. I finally decided to do something about it.
Thanks for the tip! 😎
This just happened to me. The plastic socket assembly is melted and the bulb wont even fit through. Is the only solution replacing the tail light assembly?
Yes, if the bulb socket is melted, you will need to replace the wire harness. It’s a very cheap fix.
Changed out the bulbs, good tip
So I guess the 2357 saying is hotter , they get stuck to the plastic socket which happened to mine and it broke the whole socket while i tried removing the bulb. Now i have to spend extra $$ just for a bulb replacement.
Man, thank you for making a quick, to the point video that isn't 45 minutes of talking, appreciate it honestly
And his camera angles are on point!!!🎉
Appreciate the straightforward walkthrough and all the links in the description.
Great to see no nonsense content.
Thanks for watching!😎
Great video, thanks…it took me 20 minutes to fix because your walk through was so thorough. For someone who sometimes muscles things when they shouldn’t the tip on pulling out that piece was great.
Thanks for watching!😎
I used this video this weekend to replace both tail light wiring harnesses. I don't usually tackle these types of projects, but it was a piece of cake with this clear and concise video.
Thank you.
Thanks for watching!😎
Great video
I was going to try and splice out a short in the wires and saw your video and thought:” Even I can do that!” and I did without breaking anything or screaming in frustration
Props to you sir
Just finished installing my passenger side tail assembly harness. Thanks. Your video made it so easy. I was dreading the job…until I saw how easy it was to remove the taillight assembly. Took all of half an hour.
Thanks for watching!😎
Thanks. Spot on. I’ll be removing my taillight assembly. It’s sure better than what I did with the other side. I cut and spliced in the taillight socket. It worked just fine. Everything else worked so no worries there.
😂 that's what I was going to do until I saw how easy it was to just replace the whole thing!
Just got my part in the mail today and is going to do it in the morning asap thank you !!
You made it look simple.. I guess I will give it a try…. Thanks!!!
This really helped. Thanks.
Thanks! I was able to replace the part, but it had a short… at least i know I can do it.. Thanks!!!!!
Thank you for the video. I was able to do the work myself,also for the tip getting that last clip out!
Mine burnt out and melted the same way which is why I'm watching this video thank you
Same here.
None of the lights for the entire assembly work but on my last assembly i had on all the lights worked but i had to change it because my brake light melted so i have to completely replace it ? The bulbs are correct and i bought the wore harness that was in your description any tips?
What is the Grey part with wholes called, my light bulbs melted the plastic Grey part I need to replace it. Do I have to replace the whole rear thing.
I may need to do this even though I replaced the bulb with the tail light still in the car. It worked at first and then when I put it in, it stopped? Figured out that I had to bend the wire back into the clip for it to get juice. Clearly I need a new wire harness as I shouldn't have to bend the wires to get electricity running. Will see how long this last
super helpful, thank you so much
Does anyone know what tail light harness I need for a 2018 Hyundai Sonata SE? I can’t find any online
Awesome video. I just wonder if the harnesses on amazon are going to have the same issue and eventually melt and burn out the bulbs quickly.
Can’t be worse than the stock one.😎
@@fixinit touche. Haha
I followed the while video but theres no power ebing supplied to the tail light connector and im stuck
Appreciate it a lot man!!!
Thanks for watching!😎
I have a 2013 Kia Forte EX which is the same company and looks very similar. My problem is my brake light bulbs are clicking in! The ones I replaced! The socket isn’t burnt out but wondering if I broke two sockets? I can’t imagine I did. Or I’m stupid? Anyone else had this problem before? Thanks for the video!
What did you do to “ trim off a little bit “? 😊 I’m afraid I may have the same problem.
I trimmed it with a utility knife
What is the Grey part with wholes called, my light bulbs melted the plastic Grey part I need to replace it. Do I have to replace the whole rear thing.
@@hmm949 its called the socket
Sorry if this is a dumb question.. but does this work on a 2011 Hyundai sonata?
Yes
Another tip use gloves when changing bulb I did it without gloves and the glass popped on my fingers . Really cuts deep so use gloves ‼️
just swapped out the wire harness but, since my bulbs have melted the housing. now I have to replace the entire tail light assembly other wise the bulbs won't stay in place.
I mean you can do some arts and crafts. Worst case scenario is you mess it up and have to replace it which you were gonna anyways.
Where would i find this part?
There’s a link in the video description
Same exact problem I had with my 2014 Sonata. Fail inspection and those bozos tried to tell me I had to replace the entire taillight assembly😒
The Sonata is so annoying for this. Also, why is it so easy to steal? No alarm for the back windows, and you can use a USB to start the ignition
Is there a left or right ?
They are the same for both sides
I have checked the bulb and the fuse but is not working
Doesnt it need to be rewired?