Amazon: Rode NT1 Studio Kit rex.red/rode-nt1-studio-kit * Rode NT1 Microphone rex.red/rode-nt1-microphone * Headphones rex.red/sony-mdr-7506 * Kit with Mic Stand rex.red/rode-nt1-mic-stand * Rode Ai-1 rex.red/rode-ai-1 * Rode Ai-Micro rex.red/rode-ai-micro * Mic Desk Stand rex.red/rode-microphone-stand-desk * * We earn money from qualifying purchases using our affiliate links. Affiliate links are marked with a star. * As an Amazon Associate I earn from qualifying purchases.
Do u know at what DB exactly your mic is? I have to use 38-41 db to people properly hear me. Ive seen some videos where people use around mid 20'ish but with below 38 im really quiet idk why
I don't know. Usually gain at 11am or 12 noon. Talking 5-10cm from it. With a limiter that I adjust to reduce or boost it if I talk too quietly. I will do a video for this question soon hopefully to show the whole process from recording to export, upload and checking the loudness in UA-cam
Rode NT1 with interface kit is what I decided to buy. Both are great microphones but NT1 has a more flat frequency response and it does sound great for voice-overs while NT1-A has more color on the high-end and could be better for some voices. You have to try both but if not sure, get the NT1+AI-1 hit.
@@IONHowTo However, I think I would probably take the Rode NT1-A and the Focusrite Scarlett Solo 3rd Gen interface, because this interface is better than the one from Rode. It has a better interface and I will be able to connect it to Studio Monitors, and thanks for the answer :)
@@Kapi744 focusrite is a lot more popular, sounds like a good choice. They all have studio monitors output but scsrlet may have more configuration options.
hey just wanted to ask if there's a reason my mic interface doesn't have a green color? it barely picks up any audio when i record even though I can hear myself through the feedback and i followed all the steps :( the gain knob is turned fully to the right too
Saying it just in case you didn't watch the video:) all.explained there. Press the mic gain button to enable +48 phantom power if your mic needs it - check your mic specs. If it says phantom power or +48v it needs it.
@@IONHowTo same setup; RODE nt1 and ai-1; the gain doesn't pick up any sound at 11-12 o'clock so i put it all the way to 4 o'clock (and yet no audio is recorded, though i can hear myself)
@@LYN_channel oh wow sorry to hear that. Something is wrong for sure. I'd try to disconnect and reconnect the xlr cable from mic to interface set gain at half way make sure phantom power led turns on (like in video) and press the monitoring knob too for direct monitoring to headphones. If it still doesn't turn orange when you talk loud and close 5cm. Connect usb to computer /laptop and install rode central app/software. Do a firmware update just in case and check again. If still the same contact rode support if you want to try maybe they know about your type of problem to sort it out. Easiest is to contact the store you bought it from to get it replaced or returned and refunded.
Hello! I encounter the following problem with this microphone. When I write a speech and say words, for example, but with P I hear a pff . Can anyone help with this problem?
You're talking about plosives? Spikes on the waveform or some other thing? If it's anything else, contact rode support directly. Maybe record a sample for them to hear the problem.
Could you give me some advice on making the choice between NT1 4th with AI-1 SET and a single NT1 5th since the price of theses two are almost the same. Thank you!
I don't need to upgrade at all but it really depends what you need. I need real time monitoring with minimum delay so the ai-1 or any other interface with direct monitoring is a big deal for me. If you need a compact quick setup, the new nt1 in usb mode sounds perfect. Maybe it even has some kind of direct monitoring. I didn't check.
Once connected with USB, click on the right - lower side on the speaker icon and in Windows 11 or even 10 it should show you a menu to chose output and chose Rode Line so you hear in headphones. Recording is from the Audio - Recording settings in Control Panel. Hope it helps.
I actually tried it with my old phone and it works as an audio source. The NT1 5'th generation even has a usb port built-in to skip the audio interface part.
Try to install the rode apps and update the firmware also make sure you speak into the side with the dot. I made this dilly mistake so saying it just in case.
@@SecondAccount-et2ne for PC there is at least one app that can do firmware updates. See on their download section. It's best to ask them for sure. You might have a bad interface or mic.
@@IONHowTo Can you teach me how to level the mic for streaming games? My mic is blocking my computer screen. And when I move the mic further away from me, the sound is a lot quieter while streaming.
@@Hihi-be9qx see how to enable headphone monitoring for the headphones in the video - press knob. Also press gain knob to make sure p48v is on. You should talk pretty close into this microphone. Closest you can. 10-20 cm usually.
My PC isnt capturing the mic audio through obs or anything else, I can hear it if I monitor with headphones through the interface. But obs isn’t capturing the mic even tho it’s connecting
orice intrebari ai, intreaba aici cu incredere sau citeste ce au comentat alti utilizatori. De obicei sunt cam aceleasi intrebari si raspunsurile sunt la fel.
I guess you could but it's a bad idea. Direct monitoring with wired headphones directly plugged into the ai-1 interface will give you very low latency monitoring. I can't talk if I hear myself with a half second delay.
@@zakaria2721 no need for expensive headphones. On hot summer days I use my trusted sony v150 - cheap but good. Keep volume in headphones to minimum you can use
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Amazon: Rode NT1 Studio Kit rex.red/rode-nt1-studio-kit *
Rode NT1 Microphone rex.red/rode-nt1-microphone *
Headphones rex.red/sony-mdr-7506 *
Kit with Mic Stand rex.red/rode-nt1-mic-stand *
Rode Ai-1 rex.red/rode-ai-1 *
Rode Ai-Micro rex.red/rode-ai-micro *
Mic Desk Stand rex.red/rode-microphone-stand-desk *
* We earn money from qualifying purchases using our affiliate links.
Affiliate links are marked with a star. *
As an Amazon Associate I earn from qualifying purchases.
Thanks, that was really helpful! I struggled to position the golden dot in front of the pop shield xD
was a bit messy for me too lol
Is Audio interface is necessary to record just vocal? Your suggestions will be appreciat.
Yes, this microphone needs phantom power 48v. Won't work without it.
Do u know at what DB exactly your mic is?
I have to use 38-41 db to people properly hear me. Ive seen some videos where people use around mid 20'ish but with below 38 im really quiet idk why
I don't know. Usually gain at 11am or 12 noon.
Talking 5-10cm from it.
With a limiter that I adjust to reduce or boost it if I talk too quietly.
I will do a video for this question soon hopefully to show the whole process from recording to export, upload and checking the loudness in UA-cam
Thank you very much. great help!
nice vid man
Mam takie pytanie, jak będę kupował Rode to lepiej kupić tego z interfejsem audio (Rode NT1) czy bez (Rode NT1-A) ale z innym interfejsem ?
Rode NT1 with interface kit is what I decided to buy.
Both are great microphones but NT1 has a more flat frequency response and it does sound great for voice-overs while NT1-A has more color on the high-end and could be better for some voices.
You have to try both but if not sure, get the NT1+AI-1 hit.
@@IONHowTo However, I think I would probably take the Rode NT1-A and the Focusrite Scarlett Solo 3rd Gen interface, because this interface is better than the one from Rode. It has a better interface and I will be able to connect it to Studio Monitors, and thanks for the answer :)
@@Kapi744 focusrite is a lot more popular, sounds like a good choice. They all have studio monitors output but scsrlet may have more configuration options.
hey just wanted to ask if there's a reason my mic interface doesn't have a green color? it barely picks up any audio when i record even though I can hear myself through the feedback and i followed all the steps :( the gain knob is turned fully to the right too
Saying it just in case you didn't watch the video:) all.explained there.
Press the mic gain button to enable +48 phantom power if your mic needs it - check your mic specs. If it says phantom power or +48v it needs it.
@@IONHowTo yep, i did follow the video and it the P48 button is lit red but the audio button still doesn't light green when i sing/speak
@@LYN_channel what microphone? Gain for me has to be at around 11-12 oclock
@@IONHowTo same setup; RODE nt1 and ai-1; the gain doesn't pick up any sound at 11-12 o'clock so i put it all the way to 4 o'clock (and yet no audio is recorded, though i can hear myself)
@@LYN_channel oh wow sorry to hear that. Something is wrong for sure. I'd try to disconnect and reconnect the xlr cable from mic to interface set gain at half way make sure phantom power led turns on (like in video) and press the monitoring knob too for direct monitoring to headphones.
If it still doesn't turn orange when you talk loud and close 5cm.
Connect usb to computer /laptop and install rode central app/software.
Do a firmware update just in case and check again.
If still the same contact rode support if you want to try maybe they know about your type of problem to sort it out.
Easiest is to contact the store you bought it from to get it replaced or returned and refunded.
I hear myself, i hear the sound but people on discord don’t hear me , how can i do please?
with this mic you have to go into discord settings then voice and video settings put your input to line rode al1 and your output to your headphones
Hello! I encounter the following problem with this microphone. When I write a speech and say words, for example, but with P I hear a pff . Can anyone help with this problem?
You're talking about plosives? Spikes on the waveform or some other thing? If it's anything else, contact rode support directly. Maybe record a sample for them to hear the problem.
Damn, mine is silver / grey, which looks kind of nice but black is actually nicer.
did it work for ps5 ?
with the ai-1 yes. just plug the usb in👍
Could you give me some advice on making the choice between NT1 4th with AI-1 SET and a single NT1 5th since the price of theses two are almost the same. Thank you!
I don't need to upgrade at all but it really depends what you need.
I need real time monitoring with minimum delay so the ai-1 or any other interface with direct monitoring is a big deal for me.
If you need a compact quick setup, the new nt1 in usb mode sounds perfect. Maybe it even has some kind of direct monitoring. I didn't check.
@@IONHowTo Thank you for your kind reply!
Do you need a driver (ex. ASIO driver) on this interface, or it's just a plug and play interface? [Windows 10 user here]
There are asio drivers but it work directly without any extra software or drivers. Only rode central to update firmware.
Yes you need ASIO driver on Windows.
Sir I connect my rode audio interface to pc but I don't know how to active the sound system with pc
Once connected with USB, click on the right - lower side on the speaker icon and in Windows 11 or even 10 it should show you a menu to chose output and chose Rode Line so you hear in headphones.
Recording is from the Audio - Recording settings in Control Panel.
Hope it helps.
@@IONHowTo thank you sir your valuable support,I will check and update you
Can I use it to record in cellphone??
I actually tried it with my old phone and it works as an audio source.
The NT1 5'th generation even has a usb port built-in to skip the audio interface part.
Is therr a driver for it cuz when i use it its soft and it used to be very sensitive idk why it went soft
Try to install the rode apps and update the firmware also make sure you speak into the side with the dot. I made this dilly mistake so saying it just in case.
@@IONHowTo also contacted rhode just incase so waiting for a reply
@@IONHowTo is it rhode companion app?
@@IONHowTo or rhode central desktop app
@@SecondAccount-et2ne for PC there is at least one app that can do firmware updates. See on their download section. It's best to ask them for sure.
You might have a bad interface or mic.
I adjusted the gain at 11 o'clock, why is the sound in my discord so low?
Check discord settings for levels, if I make a video would you watch it?
@@IONHowTo Can you teach me how to level the mic for streaming games? My mic is blocking my computer screen. And when I move the mic further away from me, the sound is a lot quieter while streaming.
@@IONHowTo And I'm using headphones, the sound from the cpu is not plugged into the Ai-1, will it affect the sound?
@@Hihi-be9qx see how to enable headphone monitoring for the headphones in the video - press knob. Also press gain knob to make sure p48v is on.
You should talk pretty close into this microphone. Closest you can. 10-20 cm usually.
@@IONHowTo Thank you very much. I think the reason is probably because I am too far away from the mic.
My PC isnt capturing the mic audio through obs or anything else, I can hear it if I monitor with headphones through the interface. But obs isn’t capturing the mic even tho it’s connecting
Check the device audio settings, select the interface as input
@@IONHowTo I don’t see the interface on devices, I only see Rode nt1 and I already updated the firmware as well
@@fuckdroz rode nt1 can't show in devices it's xlr, unless you have a usb version. Any new device that shows, try to use that as input.
Ion, am ceva întrebări , cum te-aș putea contacta?
orice intrebari ai, intreaba aici cu incredere sau citeste ce au comentat alti utilizatori.
De obicei sunt cam aceleasi intrebari si raspunsurile sunt la fel.
Does this mic work with wireless headphones?
I guess you could but it's a bad idea.
Direct monitoring with wired headphones directly plugged into the ai-1 interface will give you very low latency monitoring.
I can't talk if I hear myself with a half second delay.
@@IONHowTopls , is it necessary to buy those expensive headphones like audio technica something ? Can i just use my phones earphones lmao ?
@@IONHowToi just want to record voice , not lives or something
@@zakaria2721 no need for expensive headphones. On hot summer days I use my trusted sony v150 - cheap but good. Keep volume in headphones to minimum you can use
⁰⁰0i0