#58 DIY electric board - It's my new beast pt.1

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 695

  • @KAMiJUINs
    @KAMiJUINs  5 років тому +33

    영상속에서는 순조로워보이지만 변수가 많은 작업이었습니다.시간도 생각보다 많이 걸렸구요. 하지만 처음부터 끝까지 조립해봐서 뿌듯합니다. DIY전동보드를 계획하신다면 이 영상이 도움이 되었으면 합니다 :-)
    6:55 에 나온 모터 전선 커넥트에 열 수축 튜뷰가 완전히 감싸지 않았는데 이부분은 완전히 감싸야 합니다.
    6:55 This part is wrong. The connection have to be fully covered with a tube.
    The video looked good, but there were more variables than I thought. And I needed more time than I thought.
    But I had a sense of accomplishment because I assembled them with my own hands from beginning to end.I hope this will help if someone tries something similar.

    • @bitmammothOG
      @bitmammothOG 5 років тому +2

      thank you! this is a great build and very inspiring :)

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +2

      @@bitmammothOG Thank you for watching :)

    • @Laureloke
      @Laureloke 5 років тому +1

      This is bad idea to put LiPo under board. Your board has low clirance, so your "off-road" wheels are only suitable for flat road without holes and stones. Looks nice, but not for all roads.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +2

      @@Laureloke There is no problem in my environment that I usually. But generally you are right. I'll try to change some of parts. It will be made to suit the more general use environment. (Actually, I didn't expect so many people to see this video. And the wheel was used for appearance rather than function.)
      Thank you for watching :)

    • @ВашеВысочество-п4у
      @ВашеВысочество-п4у 5 років тому +1

      How many money u spend on this project. If this a not secret ?)

  • @adityaaurora9869
    @adityaaurora9869 5 років тому +69

    ladies and gentlemen of the jury, you've got to get a hold of yourselves

    • @lolosolodolo1
      @lolosolodolo1 2 роки тому +1

      Wow I scrolled past this comment right as it said it in the song. Super surreal feeling to read something that is also background music.

  • @tinmant4127
    @tinmant4127 4 роки тому +2

    This is probably one of the coolest and most informative diy e skate builds I have seen. Good Job on just showing us how to do it without all the unessasary repetitive word vomit most DIYers videos have. Good edits as well. You didn't waste time on the video, but I know it took a long time to edit and make everything look clean like you did. I checked out your part 2 on this build as well, and the directness in your cost on all parts with total was great as well. Test ride was great with speed and acceleration as well. Over a big thumbs up!

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Thank you soooooo much :)

  • @KUfraskins
    @KUfraskins 4 роки тому +9

    This was extremely well done and helpful to all builders

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Thank you for watching :)

  • @vinnypal783
    @vinnypal783 4 роки тому

    You know what? You make the art of board building look simple enough and you probably got a lot of people off their butts to pursue this one little dream of theirs, I sincerely admire you for the effect you have had on people...your boards are fundamentally sound, and if they were sold retail, I would certainly want to purchase one. I think they would be great for those of us who have owned an evolve maybe, but have not the desire to pursue the DIY route for the eventual upgrade. This board are for those who are committed to the idea of travelling in an Electric vehicle, as if that was the normal thing to do, in the near future.

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Thank you so much for saying that :) Bro~

    • @vinnypal783
      @vinnypal783 4 роки тому

      @@KAMiJUINs Thank you for sharing your board building with us, I am also a DIY Eboard Enthusiast and am currently in the middle of getting parts for my own beast. I get a lot of inspiration from the boards you build. You are so clean and precise with your approach and your boards speak for themselves!

  • @Livefreeman
    @Livefreeman 5 років тому +12

    my verdict of this project, not guilty, good job

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +2

      Thank you so much :)

  • @dangerdave3135
    @dangerdave3135 5 років тому +29

    Ladies and gentlemen of the jury gotta get ahold of themselves geeez

  • @jacobboone568
    @jacobboone568 4 роки тому

    did you just go to a nearby hardware store for the plastic sleeves and protection for the motors and esc wires?

  • @leboiffic01
    @leboiffic01 4 роки тому +1

    Hi Kami, I would really thank you for this video, which is probably the most acurated that we can found on the net. With your help, I ordered all parts for my moutain board, based on your configuration and it’s work very well !! There is now more than 1 month that I ride everyday with it, in my little corner of France and it’s really so fun !!! I’m now looking for a method to use 4 x Lipo to extend my maximum distance avoided. 😀 One more time, many thanks for your videos an for the quality of them. Take care of you ... we are now awaiting about the next

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +2

      Merci beaucoup d'avoir aimé ma vidéo. De nos jours, je suis tellement occupé par mon travail personnel. Donc je ne peux pas faire des vidéos pour un moment.
      J'espère que vous serez toujours en sécurité.

  • @termaddict
    @termaddict 4 роки тому

    Hi kami, can you please provide a link for the type of terminals you soldered to the ESC (6:42)? Thank you very much. Great videos!👍🏽

    • @termaddict
      @termaddict 4 роки тому

      Also, if you could recommend a charger and BMS for this setup.

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Thank you for watching :) All the parts links are under the description box.
      And I used a balance charger instead of a BMS. I tried to install a BMS, but it was difficult to find a good BMS that supports the 12s battery.

  • @paul-erikhelliste4390
    @paul-erikhelliste4390 4 роки тому +2

    Kami juins i want to know whats the range for your new beast

  • @ulmuhide
    @ulmuhide 5 років тому

    님 정체가.. 전기, 기기, 부붐을 고르는 것부터 다루는 디테일까지 못하는게 없네요. 이렇게 다방면으로 다 할 수 있는건 정말 대단한건데. 정체가 뭐예요

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      저도 여기에 관심갖게 되면서 공부했어요, 유튭영상이나 자료도 많이 찾아 봤구요~ :-) 좋게봐주시고 또 시청해주셔서 감사합니다.

  • @andrewstang-green3107
    @andrewstang-green3107 5 років тому +10

    I Love it!
    I would suggest larger wheels for more clearance to the battery.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching ;) and visit.

  • @mta3562
    @mta3562 4 роки тому

    Awesome build. I keep coming back to the video. I have couple questions if you don’t mind. 1. Where do you get the inserts that you put in the deck? Why did you chose to the reverse motor mount over the smaller one? Thanks in advance

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      The short one is caused by interference with the deck when a motor with a diameter of 63mm is used.
      and I bought the inserts from Amazon USA. Thank you :)

  • @chrisrathjan1501
    @chrisrathjan1501 5 років тому +4

    Sweet build. I like the boxes they suit it really nicely. You have some good ideas. Thanks for the credit hahaha not at all necessary. I found vibration still gets through but it helps a little bit. That will be so much power! I suggest you get some Lipo alarms. If one cell goes bad you need to know about it. This is going to be epic.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you so much for using your idea, :-) and thank you for your suggestion (ºㅁº)=b

  • @Nandox7
    @Nandox7 5 років тому +2

    Nice DIY buld! :) Now show us that thing rolling.
    Any reason why you did not use this time a DIYE motor mount and instead went for the torqueboards motor mount?
    (Just for convenience as you were getting remaining parts from there?)

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :-) At first, I just wanted to assemble it into torque parts.
      However it was found that double bolt for torque was more accurate than DIYE's one bolt.(The mount angle was constant and more compact.)

    • @Nandox7
      @Nandox7 5 років тому

      Thanks for the explanation.
      The clamp you're using looks good but I can't see it in their site, the one you link seems to be different.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      ​@@Nandox7 Yes! looks like a different pic but same one. and you can buy combo it's bit cheaper.
      diyelectricskateboard.com/collections/electric-skateboard-motor-mounts/products/63mm-reverse-motor-mount-set

  • @miguelmacedo935
    @miguelmacedo935 4 роки тому

    Hi where did you get those black spacers for the trucks so the front wheel doesn't move in the axle?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      spacer included in the truck set and the thin ring shape of the spacers was added.

  • @thomascoble3741
    @thomascoble3741 5 років тому +131

    That music drove me crazy

    • @Sailor2752
      @Sailor2752 5 років тому +4

      Same! It got a little annoying

    • @stevegek
      @stevegek 5 років тому +16

      But what's the verdict?

    • @knownuser09
      @knownuser09 5 років тому +3

      @@stevegek Verdict fuck that shit music off next time.

    • @kimbow7216
      @kimbow7216 5 років тому +2

      AGREED. TURN THAT SHIT OFF.

    • @augustlee4400
      @augustlee4400 5 років тому +10

      you better get ahold of yourself

  • @sillydopeyguy
    @sillydopeyguy 5 років тому +1

    Very nice build. I'm sure someone has asked you but I was just wondering how much flex does the board have

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +2

      Thank you for watching :) it's not flex so much for me. (i'm 64kg wight)

  • @yanzodadon
    @yanzodadon 5 років тому +2

    Your videos make it look easy to enjoy the simple things in life. I like watching your videos. Why did you choose the flipsky ESC over the focbox unity?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching and visit every time :-) Because I ordered Raptor 2.1 last December.

    • @MaVeRiCk77
      @MaVeRiCk77 5 років тому

      @@KAMiJUINs 🤣

  • @nathanaelmuller5306
    @nathanaelmuller5306 3 роки тому

    Where did you buy theses plastic box ? I love so much your build so satisfying to watch :p
    Thanks for the answer !

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      I got it from a household goods shop on the street.

    • @nathanaelmuller5306
      @nathanaelmuller5306 3 роки тому

      @@KAMiJUINs alrigth thanks :)

  • @ifrashable
    @ifrashable 5 років тому +1

    it looks cool, but please test it on a speed-bumpthe clearance looks very low,
    and does the board flex?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for visit :-) It's not flexible at all so i used 1/8" pad. And you are right. I have to test it safely.(it's a DIY hahaha)

  • @Cretan-un6ul
    @Cretan-un6ul 4 місяці тому

    Do you have any build for 6384?

  • @ZamTVGeek
    @ZamTVGeek 4 роки тому

    KAMI, the sheet under the deck, where did you get it and what is it?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      it was an interior film(sheet) and you can buy it from Amazon :)

  • @lassebak6909
    @lassebak6909 4 роки тому

    great vid.. doesn't the shock pads work better when between the board and truck instead of bolt and truck? just curious

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Thank you for watching :) I've tried both, but it's similar.

  • @sunstart
    @sunstart 3 роки тому

    9:23 can u tell me the size of wood insert and screw thx

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому

      M4 size can be fit, And when you buy insert nut, you can fit the size of the bolt you will use. Thank you for watching :)

  • @paul-erikhelliste4390
    @paul-erikhelliste4390 4 роки тому

    Hi kami juin s. if i need longer motor sensor wire when i want to connect motors to esc

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      It is quite long when combined motor sensor cable with ESC sensor cable. It almost 45-50cm long.
      If it's needed longer, you'll have to extend it.

  • @MrRailcraft
    @MrRailcraft 5 років тому

    Why do you not fully cover the bullet connectors coz the risk of electrical shorting?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      If you look at the end of the video, you'll see it's completely covered. Thank you for letting me know. I'll let to the other viewer know in a fixed comment.

  • @lolosolodolo1
    @lolosolodolo1 2 роки тому

    What is the range on this setup. I have 6s lipos sitting around

  • @channelr7878
    @channelr7878 5 років тому

    would 160mm all terrain wheels work if the deck and pulley were different?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Be fully operable. And I think it's better suited to all-terrain.

    • @channelr7878
      @channelr7878 5 років тому

      @@KAMiJUINs Thanks! and keep up w the videos I love your format

  • @santosandchristy
    @santosandchristy 5 років тому

    Its actually pretty cool ,but won't you have problems with objects hitting the items on the bottom of the board

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching with your opinion :) I'm going to try to improve it one by one.

  • @Mo-dq6zt
    @Mo-dq6zt 5 років тому

    NIce Build, I didnt see you use threadlocker for the bolts? Do you think it will be fine without it?

    • @Mo-dq6zt
      @Mo-dq6zt 5 років тому

      thread locker is a glue that keeps your bolts firm

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :-)
      I used insert screws with adhesive.(Deck hole and outer part of screw) I checked after the initial test ride.This is strong enough more than I expected.
      I think neat finish and easy separation are the advantages.

  • @MonkeyMagick
    @MonkeyMagick 5 років тому +2

    You have some good skills there. Well done. Look forward to seeing the next part!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @AVEJOTV
    @AVEJOTV 4 роки тому

    Hi kami ... loved this build and Im taking a lot of inspiration from this for my next build... could I ask where did u buy the black wrap u used on the bottom of the deck??¿?? -Thank you and keep up the good work :)

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      Thank you for watching :) and should search for PU sheets on Amazon.

  • @fazer12779
    @fazer12779 5 років тому

    Why wouldn’t you use Abec11 F1 107mm wheels? The wheels you’ve used look like the slick revolution version.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) I couldn't buy F1 107mm. It's sold out already in my country.

  • @skrya1248
    @skrya1248 3 роки тому

    Where did you buy these plastic boxes? 8:54

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      I bought it at a household goods shop.

    • @skrya1248
      @skrya1248 3 роки тому

      @@KAMiJUINs Oh, so I probably won't find it in Europe. Anyway, thx for the info. Btw I just started longboarding after seeing your videos ^^. Keep it up!

  • @mikesmith7136
    @mikesmith7136 4 роки тому

    will the 6380 fit on the atb hangars on your trampa?, I have found a third party that makes mounts to fit the atb hangar. I would like to go with 6380s.

  • @EthyoDancehallsongmaker
    @EthyoDancehallsongmaker 3 роки тому

    Result of batteries is 12s 12ah or 12s 6ah when connected in parralel ?

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      Serial Connection - 12s 6.6ah
      Column Connection - 6s 13.2ah

  • @Pandadancypant
    @Pandadancypant 5 років тому +1

    Neatest and cleanest diy board I've seen to date. Nice job

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching and visit :-)

    • @smglsnk
      @smglsnk 5 років тому

      absolutely right! the best one so far... and the most beautiful. The whole bulid is inspiering. If and when I make one of my own... I'll do it like this. great job. Sorry for my English.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      @@smglsnk Thank you for thinking that way :-)

  • @karlstern7877
    @karlstern7877 5 років тому

    As a fellow esk-8 builder and diy-er I can say this thing will out-perform every boosted board and evolve and even my own builds. an fsesc 6.6 and 6380 motors at 12s is more than plenty for racing.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @negaopiroca2766
    @negaopiroca2766 5 років тому

    Nice to see people realizing only Lipos discharge enough current for it... how do you charge it though? Do you remove the enclosure everytime? Also do you charge it as one big 12s battery or two 6s? Thanks!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) BMS is not installed yet, so it is removed from the enclosure during charging.
      And I'm using a balance charger. (Connect two 6s)

    • @negaopiroca2766
      @negaopiroca2766 5 років тому +1

      @@KAMiJUINs I see, thanks for the info. From what I could find, it's hard to find BMSes with enough amperage for lipos anyway. Also, it's definitely a black box and reportedly do not succeed with balancing the cells. This guy managed to put xt90 and balancing plugs on the plastic enclosure, really nice...
      ua-cam.com/video/HuNxDbChhPw/v-deo.html
      Let us know if you decide to do something like this ;)

    • @negaopiroca2766
      @negaopiroca2766 5 років тому +1

      ... and here charging a 12s using the balance leads :)

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      @@negaopiroca2766 Thank you for the video :)

  • @Sklebb
    @Sklebb 4 роки тому

    Great board! What material do you use to cover the bottom of the deck?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      Thank you for watching :) it was an interior film and you can buy it from Amazon

    • @Sklebb
      @Sklebb 4 роки тому +1

      @@KAMiJUINs thank you ❤️

  • @Pootski302
    @Pootski302 5 років тому +1

    Hey Kami! About the vesc tool, for your computer, did you have to download any drivers or any COM ports to your computer to recognize the vesc? It seems I’m having issues with my computer connecting to the vesc. I don’t know whether it is the cable (even though it came with the flipsky vesc) or the computer..

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Well, I used a Windows version computer. And there was no problem.
      Shouldn't you make a video about the situation and contact Flipsky?

    • @Pootski302
      @Pootski302 5 років тому +1

      KAMi JUINs I seem to have made a noob mistake. I tired using different cables and it ended up working on a windows 10 computer. Thanks for the reply though! Keep up the awesome videos, love your work!

  • @EthyoDancehallsongmaker
    @EthyoDancehallsongmaker 4 роки тому

    Hello i need to know where i can find charger and adaptor for battery charging for theses turnigy can you please give me links ?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      www.amazon.com/gp/product/B01NB9A36R/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
      www.amazon.com/gp/product/B073BGFDCW/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

    • @EthyoDancehallsongmaker
      @EthyoDancehallsongmaker 4 роки тому +1

      @@KAMiJUINs thanks you 🙂 very helpful

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      @@EthyoDancehallsongmaker No problem :) enjoy your ESK8 life

    • @EthyoDancehallsongmaker
      @EthyoDancehallsongmaker 3 роки тому

      Hi kami can i charge the two batteries at same time on the b6 charger ?

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      ​@@EthyoDancehallsongmaker No. if you want to charge same time you have to buy a better one. (I knew that some charger can charge four batteries same time out there)

  • @tuckyew1
    @tuckyew1 4 роки тому

    love your videos, choice of music and your dog! may i ask, if you bought the bustin deck from their site?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      Thank you so much :) I bought the deck from an offline skateboard shop

    • @tuckyew1
      @tuckyew1 4 роки тому

      @@KAMiJUINs that's great that they sells it offline in your area! Love your videos. They are so detailed

  • @mafu46
    @mafu46 5 років тому +8

    Great build! I think it's sit to low from the ground

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) It's okay where I usually ride, but in other places, I agree with you.~

  • @BExe-jm4uc
    @BExe-jm4uc 4 роки тому

    Hey man what is the song that you used in this video ? I am just wondering :)

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      MUSIC BY Till - This right here

  • @brandonbell359
    @brandonbell359 5 років тому

    Looks neat, but could you have used 4 3S 6600s to gain more ground clearance?

    • @brandonbell359
      @brandonbell359 5 років тому

      Nevermind. I just watched part 2. Neat project.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @lefrug.f8747
    @lefrug.f8747 3 роки тому

    We're did you get the conector cable for the Motor Sensor

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому

      The ESC purchased included motor sensor extension cables.

  • @Sh1ftedStandards
    @Sh1ftedStandards 4 роки тому

    The link for the wheel pulley says it’s 13mm wide. I’m looking for 15mm wide wheel pulleys for mbs wheels?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      trampaboards.com/33-tooth-slave-wheel-for-83mm--90mm-longboard-wheels-silver--high-speed-p-12858.html
      check this out~

  • @aryehscharf3317
    @aryehscharf3317 5 років тому

    Why not a 12s4p? Why not direct motors?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching. And I don't get What do you mean. This setup is a combination of what I want.

  • @erickelly8704
    @erickelly8704 5 років тому

    That's a banging board looks awe-SOME can't wait to see the maiden ride & hear those motors!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching ;)

  • @donmimo2011
    @donmimo2011 5 років тому +1

    Nice music. Cute dog. Great job. You are a genius.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @dallaschase1462
    @dallaschase1462 4 роки тому

    I appreciate all of your videos. I hope to build my first board soon. You've provided so much information in watching all of your tests. It will help me so much! Thank you!

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      No problem and I'm glad I can help you :-) Thank you for Watching my videos~

  • @UltramaticOrange
    @UltramaticOrange 5 років тому +3

    Very clean build. I'm looking forward to the test ride video!
    You should check out the remote from Hoyt St. Electric Skate. It's a weird design, but very nice to use.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Thank you for visit :-) And i saw that a round thing.Thank you for your suggestion.~

  • @user-pv8ke6tp1r
    @user-pv8ke6tp1r 5 років тому +1

    5:42 패드는 어떤 용도에요?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      진동을 조금 잡아주는 효과입니다.

  • @kingesk8
    @kingesk8 3 роки тому

    The build is so clean it’s it’s insane

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      Thank you for watching :)

  • @jmalig9006
    @jmalig9006 5 років тому

    What did you use here and what size drill bit? 9:27

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      thank you for watching :) 9mm drill bit

    • @jmalig9006
      @jmalig9006 5 років тому

      KAMi JUINs love your videos 👌🏻

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      @@jmalig9006 Thank you so much~ :)

  • @negaopiroca2766
    @negaopiroca2766 5 років тому

    Could you point to the 3M wind screen product? Good stuff!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Thank you for watching.
      check this out - www.amazon.com/Adhesive-Weather-Stripping-Insulation-Neoprene/dp/B07H5DHFR3/ref=pd_rhf_se_p_img_5?_encoding=UTF8&psc=1&refRID=DZ0G170GD0KKYGXZY0ZQ

  • @ericromack9617
    @ericromack9617 4 роки тому

    Anyone know what product that black wrap is that he puts on the underside of the board?

  • @ratheonhudson3311
    @ratheonhudson3311 5 років тому +1

    Beautiful step by step build! Looks great too

  • @NamezzemaN
    @NamezzemaN 5 років тому +4

    Nice! I admire your craftsmanship.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @jaroslavlajta
    @jaroslavlajta 5 років тому +1

    What is the range?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Thank you for watching :) it was 15-20 Km (10-13mi)

    • @jaroslavlajta
      @jaroslavlajta 5 років тому +1

      @@KAMiJUINs Thanks KAMi JUINs you're the BEST!

  • @kaydenyap5677
    @kaydenyap5677 5 років тому

    How much was the build all together

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      It cost around $1,300 just for the parts. (Excluding duties and shipping charges)

  • @voguearts4389
    @voguearts4389 4 роки тому

    Hi, How do you charge the batteries?

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      I use a balance charger. Yeah, it needs open the enclosure when every charge.

  • @garretpeng7136
    @garretpeng7136 3 роки тому

    What's the nut and screw size u use at 9:27

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому

      M4 size insert nut x 9mm

  • @mafarri12
    @mafarri12 5 років тому

    what charger are you using for the longboard? and where do you plug it in the longboard?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)The battery is removed from the enclosure and charged to the balance charger when charging. Because it is not a fixed build yet.
      (I'm going to change the size of the Lipo battery and the Voltage Current. The BMS and charging terminals will then be installed.)

  • @byoung-supark5896
    @byoung-supark5896 4 роки тому

    카미님, 영상 감사히 잘 보고 있습니다. 저도 보드DIY중인데요, 영상에 나오는 번데기너트? 규격 좀 알 수 있을까요? 숫놈 볼트는 길이 몇으로 사면 맞나요? M5번데가너트라고 검색해서 사면 될까요? 그리고 플라스틱통 고정하실 때 쓰신 ㄱ자 연결고리는 이름이 어찌되는지요. 거기에 사용하는 볼투 너트 규격 좀 알 수 있을까요? 질문 많이 드려서 죄송해요.

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      M4,M5가 나사와 너트의 지름규격을 표시하는 단위입니다. 인써트 너트와 볼트를 구매하실때 같은 단위로 통일하시면 됩니다.
      인써트너트라고 검색하시면 되고 너트의 길이는 사용하실 데크의 두께를 고려하셔서 구매하시면 됩니다. (인서트너트 고정시 에폭시 본딩 필요합니다) ㄱ자연결고리의 경우 ㄱ자꺽쇠라고 검색하시면 될것 같습니다.

  • @NardelliFilmesOficial
    @NardelliFilmesOficial 5 років тому

    Hey kami , How is it Fsesc unit doing ? im thinking about getting one of theese to use with 2 190 kv motors in my new build

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      My FSESC6 still have working well. And I want to tell you that you should use a better remote controller than I used.

    • @NardelliFilmesOficial
      @NardelliFilmesOficial 5 років тому

      @@KAMiJUINs cool , Ill search about a new tipe of controler , thanks bro

  • @kevinst.hilaire3249
    @kevinst.hilaire3249 5 років тому

    Question how come you couldn't use the motor pulley from diyeboard?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      There wasn't motor pulley that I needed. (8mm shaft diameter with capable of using a keyway and HTD 5M 16Teeth with 15mm Width)

  • @miked.1528
    @miked.1528 5 років тому

    What is that black laminate sticker sheet called?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)
      PU sheet - www.amazon.com/s?k=pu+sheet&ref=nb_sb_noss

  • @mathiaspontesbussinger9227
    @mathiaspontesbussinger9227 5 років тому

    Awesome Job! How about the Price of ALL pieces? Did you note them all? Greeting from 🇧🇷

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      If you look at this video's description box and the next video, there is an answer to your question. Thanks :)

  • @cinematicdroneshot5912
    @cinematicdroneshot5912 5 років тому

    All the equipment is included here?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)
      No. It's not. Hexagonal wrench, drill, solder should be prepared.

  • @twotree2402
    @twotree2402 5 років тому

    인서트 너트를 사용하는 것이 나무피스를 사용하는 것 보다 튼튼하게 고정되나요?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      그렇다고 보기는 힘들고 저의 경우 외관상 피스머리가 데크 상판에 들어나 보이는 것을 원치 않아서 사용한 방법입니다.

  • @JcXtreme72
    @JcXtreme72 5 років тому

    That did come out really clean. Good job.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :)

  • @sunstart
    @sunstart 4 роки тому

    Hey quick question would a 6384 motor fit 🤔. BTW nice diy electric skateboard love the videos 👍

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      No. This 12in torque trucks can fit max 6380.

  • @nucleo1772
    @nucleo1772 5 років тому

    Hi Kami
    I have been thinking for a long time what will be better?
    - ready to ride Wowgo 2s (2 hub motors)
    - or one big 6374 190kv motor (single belt drive sys.) with 12s LiIon
    batteries and single enertion vesc
    The most important for me is:
    - acceleration, hill climbs, torque
    Do you think one big 6374 motor can beat the hubs of wowgo motors?

    • @mentuemhet
      @mentuemhet 5 років тому +1

      u need two 6374 motors to do hill climbs and torque. i have this. it's better

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      I think the belt drive is right from your focus. The reason is the torque. And I think double is better than single.
      Single drives have poor balance when accelerating and braking.(Especially if the road is wet.)
      I think, the performance of the electric board is important, but safety is the first thing. I hope the answer will help :-)

    • @nucleo1772
      @nucleo1772 5 років тому

      @@KAMiJUINs
      you're both right guys but i do not have money for two engines, vescs , mounts..... so i want to know what option will be better for me.
      For example:
      - hill 20 degrees inclination... 200 meters . Which board will defeat it faster and
      easier?
      - DIY single 6374 190kv 12s belt or wowgo 2s?
      If there is not a big difference, I will decide to wowgo 2s

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      @@nucleo1772 I think, You should go to the belt drive. Because you can mount another one after when you have some money :-)

  • @williamgreen4241
    @williamgreen4241 5 років тому

    What would be the maximum rider weight for this board?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Thank you for watching :) I don't know for sure either. There's nothing about this info at the BUSTIN deck store, either.
      Sorry for that.

    • @williamgreen4241
      @williamgreen4241 5 років тому

      @@KAMiJUINs That sucks, they gotta provide all the info!!!🤤

  • @stevevazquez9520
    @stevevazquez9520 5 років тому

    How are your MBS all terrain wheels holding up

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      You should check my video #49 out.

  • @anastach1
    @anastach1 3 роки тому

    this is art mate...good job, i love your style...the board is amazing...keep going

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому +1

      Thank you for watching :) and saying that~

  • @FalconPunch1978
    @FalconPunch1978 4 роки тому +1

    I just bought a bamboo gtr and it’s awesome but I would be perfectly happy with what you built. Nice work, well done.

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому +1

      Thank you for watching :)

  • @oliverbass2462
    @oliverbass2462 5 років тому

    Cool build! I would grab some metal zip ties for securing those wires in the back, plastic ones tend to wear quickly then snap

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Thank you for watching with your advice :)

  • @firebulit
    @firebulit 5 років тому

    How mutch does the Total build cost you?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) and check the next video of this.

  • @raflip3582
    @raflip3582 3 роки тому

    How far can go with 6600mah battery?

    • @KAMiJUINs
      @KAMiJUINs  3 роки тому

      It didn't get 20 kilometers.

  • @이용수-p6o
    @이용수-p6o 5 років тому

    결국 완성 하셨네요. 짱 보는 제가 다 뿌듯합니다.
    part2 에서 DIY 사용하셨던 툴이라던거, 나사등에 세부스펙도 알려주실수 있을까요? 힘드신데, 무리한 부탁일까?
    보고 그대로 따라해보려고 하니. 물품 선택에 어려움이 있네요.
    영상, 보드 만들어 주셔서 감사해요. ^^b 추천 꾸욱 누루고 갑니다.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      시청감사해요~
      헉!!! 툴까지는.. 집에 있는 거 걍사용해서.. 그리고 저도 있으니까 사용하긴 하는데(원래 뭐 만드는 거 좋아해서요...) 이거 만들려고 모든 툴 사는 것도 금액이 상당할것 같아요.(드릴, 드릴비트, 납땜기 등등)
      나사같은 정보는 필요하실때 매일주시면 사진 파일로 보내드릴께요.

    • @이용수-p6o
      @이용수-p6o 5 років тому +1

      네 나사는 여쭤 봐야될거 같네요 감사해요👍

  • @zackeryward8767
    @zackeryward8767 5 років тому

    Hey Kami, how can I get in touch with the Seoul eskate scene? I wanna shred my boosted mini s with some other skaters!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      In fact, I don't know much
      But in Korea, the electric board culture is not as active in the city as thought. Laws are still insufficient.
      And as far as I know, most of Korea's electric board communities are made up of mountain electric board communities with a huge range.

  • @ChernoBueno
    @ChernoBueno Рік тому

    Hey yo what’s your background music called bro

  • @LordHaehnchen
    @LordHaehnchen 5 років тому +2

    Nice! Sounds like a jetplane when firing up its engines ;)
    But your soldering technic makes me worrying a bit...
    Try to heat up the joints first and then adding the solder, like so the solder really
    flows inside the connection parts and is much more reliable...

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) with your advice.

  • @kevinwhite825
    @kevinwhite825 5 років тому

    Very talented!! Nice work, super clean

  • @Ken123264
    @Ken123264 5 років тому

    did you buy all the parts from diyelectric boards?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) Please check it description box down below~

  • @dyb6916
    @dyb6916 5 років тому

    전 이제야 전동보드 입문했는데 정말 벌써부터 DIY 보드를 도전해보고 싶게 만드는 영상이네요 !! 저도 나중에 까미님 영상 참고해서 꼭 도전해보겠습니다 !!! 다음 영상이 너무 너무 기대 돼요 ㅠㅠㅠ 빨리 보고 싶습니다!!! 한국은 전동보드 영상이 많이 없는데 항상 좋은 영상 너무 감사드려요 ...!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      아~ 그렇게 봐주셔서 감사합니다 :-)

    • @dyb6916
      @dyb6916 5 років тому

      까미 주인님! 저도 드디어 미포보드가 왔는데 전원을 키면 미세한 바람소리가 나는데 약간 팬 돌아가는 소리처럼 나길래 궁금해서 열어보니까 딱히 팬이 보이진 않던데 원래 전원키면 전원부에서 바람소리가 나긴하나요...? 괜찮은건지 걱정되네요...

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      @@dyb6916 글세요? 제가 가진 보드들은 전원이 들어왔을때 소리가 나지 않았습니다. 하지만 제가 모든 보드의 ESC 특징을 아는 것이 아니라서 그 증상에 관해 제가 판단할 수는 없을것 같아요.
      보통은 주행을 하면 모터와 ESC부분에 열이 발생하기는 합니다. 하지만 소리가 나는지까지는 저도 확인해 본적이 없네요 ㅡ..ㅡ' meepo 커스텀 서비스에 동영상 찍어서 메일로 물어보는것이 가장 빠를것 같아요.

    • @dyb6916
      @dyb6916 5 років тому

      ㅎㅎㅎ답변 감사드립니다 다시 들어보니 전원부가 아니라 모터에서 나는 소리였어요.. 전원을 키면 모터에서 삐- 하는 소리가 나긴하는데 혹시 왜 그런지 아시나요..? 문제가 있나 걱정돼서 일단 영상찍어서 미포본사에 보내긴 했는데 구동중에 사고가 생길까봐 걱정이네요 ㅠㅠ

  • @xJayteee
    @xJayteee 5 років тому

    Hi Kami, in the Vesc you put 75A for each motor?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      Now it's changed to 70A

    • @xJayteee
      @xJayteee 5 років тому

      @@KAMiJUINs wow . 140A peak then.. 18650 cells cant handle that much amps in a small enclosure

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      But I think, using Lipo is always burdensome and needs too much concern.

    • @xJayteee
      @xJayteee 5 років тому

      @@KAMiJUINs Correct . And it does not have BMS . But lipo has very high discharge at small size , 18650 expensive and not as much discharge as LIPO

  • @andrewriegel6787
    @andrewriegel6787 5 років тому

    So this cost about $500 to make??

    • @andrewriegel6787
      @andrewriegel6787 5 років тому

      Well more like $900

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching and check the next video of this.

  • @warlockboyburns
    @warlockboyburns 3 роки тому

    4wd 120mm hub motors has got to be the best board. I'm still waiting.

  • @alexwood5719
    @alexwood5719 4 роки тому

    How much did it cost in total

    • @KAMiJUINs
      @KAMiJUINs  4 роки тому

      Almost $1350USD without shipping and tex.

  • @BrianArbelaez
    @BrianArbelaez 5 років тому

    how would you deal with bumps on the road?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) and That point is shown in the next video of this.

  • @gregorypatzelt6964
    @gregorypatzelt6964 5 років тому

    What a beautiful build and what an amazing and simple video. Keep up the great work. Love your deck of choice!!!

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching~ :-)

    • @udsmall7306
      @udsmall7306 5 років тому +1

      Bustins are sweet! I just got a Rayne Rival and am toying with the idea of building it electric...but it's just so damn *pure* as a gravity freerider...

  • @ethanfeng8686
    @ethanfeng8686 5 років тому +2

    Great built by using flipsky motor, and flipsky control kit, and my favorite deck. 😀😀

    • @KAMiJUINs
      @KAMiJUINs  5 років тому +1

      thank you for watching :-) and this motors are from Torque board ~ I like this deck too~

  • @cityslick7
    @cityslick7 5 років тому +1

    Legit DYI 👍🏼. What kind of flex though with those boxes. Feel like your gonna hit stuff.

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching :) Now, I've raised the boxes height slightly. video #65

  • @adrianastro1
    @adrianastro1 5 років тому

    Kind of concerning because there's not much ground clearance. Maybe but the board on top of the trucks instead?

    • @KAMiJUINs
      @KAMiJUINs  5 років тому

      Thank you for watching it. I've already tried that way :)