많이 라이딩은 못했지만 그동안 느낀 단점을 보안하기위해 전동보드의 몇가지 부품을 교체해봤습니다. 그리고 그과정을 비디오로 만들어봤습니다. 사용한 부품정보는 설명박스 아래 남겼습니다. I haven't ridden much it, but I've replaced some parts of my DIY beast to cover the shortcomings I've felt. And I made a video of that process. Enjoy it. I left the parts information in the description box below.
I love your styling.👍Larger street wheels was a smart move but your battery ground clearance freaks me out. 😧 Thin battery packs will take much of the anxiety away.😑 Your work is really slick and beautiful to watch...thanks for posting.😎👍👊
The two 6s packs is safe for drawing 80 Amps an hour at 12s, or double for short bursts. Since one motor can draw 80 Amps at 12s, and you have 2 of them, I'd say the battery change is more of a safety update than an upgrade.
Hi Kami, Nice video! i have been watching your videos with much joy. I have just recieved my Evolve GTX AT, and allready am in love with it! keep up the modding :) Greetings from the Netherlands.
@KAMi JUINs I whish i had a board even close to this one. Im very excited about the wowgo 2 s i recently ordered, i know its not the newest, but my budget is low, and i heard a lot of ppl saying it was one of the best at release time. So im excited, but kinda jealous, because u have perhaps, the strongest and fastest board ever recorded ;) Keep on the good work! Greetings from Germany dear KAMi :)
오랜만에 영상을 보니 반갑습니다 .어제 저도 빳대리가 다 없어질 때까지 열심히 타고 다녔는데 요즘 보드 타기가 아주 좋죠. 저도 고속으로 달릴때 문제를 단순이 저가 보드를 사용하니 어쩔수 없는 경우라 생각을 했는데 부싱만 바꿔 주어도 문제를 해결할 수 있다니 놀랍고 고맙습니다 ㅋ.
안녕하세요. 부싱에 관심이 많은 남자 입니다.^^ 한가지 이해가 안되는 부분이 있어서요. Venom Bushing Graph(프로라이더가 추천하는 부싱 세팅표) 를 보면 Board Side 부싱보다 Road Side 부싱이 더 loose 잡혀 있는데요(이제까지 그렇게 세팅하는 줄만 알았어요ㅠㅠ) Kami 님은 반대로 Riptide FatCont Hard 부싱을 Tight 하게 세팅하여 놀랐습니다. 딱히 반대로 세팅해도 문제가 없는지와 원래부터 반대로 세팅하는게 맞는건지요? ㅠㅠ
this is an awesome board, well done! great deck, tons of power, and now it is smoother, just would like to know range and the only thing i would change if possible is to get the battery and esc a little more above the ground, but amazing video.
hi, love your videos. I'm trying to replicate this build and I wanted to know what's the total range with this new batteries? highly interested! thanks and keep up the good work!
Thank you for watching :) It has a range of about 10 miles. But I recommend you a 12s lithium-ion battery pack with BMS rather than Lipo batteries. Because, the Lipo battery is difficult to manage, and It has to balance charge before installing the BMS. (There is not much BMS for 12s Lipo and the price is expensive.) And I hope your plan goes well.
having the trucks in a drop through configuration makes the board feel stiff. By loosen the front truck will help it turn more but buy switching the truck to top mount position will help the board with turning without loosen the trucks. Also adding an angle wedge to the front trucks help raise the degree of the truck giving it more turn ability. Check out Landyachz evo longboard, it has a wedge on the front of the board to make it turn more and a de-wedge on the back to make it more stable. Also shorter wheel base makes the board turn more(less stable) and longer wheel base make the board turn less(more stable). I think if you can switch out the board for the Landyatchz evo 36/40 then you might have a board you'll feel comfortable going 35mph.
Have you felt the difference after replacing the battery? In my opinion from what I read recently on the internet. The serial connection of the battery increases the voltage, but the capacity remains 6200mAh although we have 3x6200mAh. I thinking about 12s or 10s batteries, is easy to build own battery pack. Thanks for another amazing video!
Thank you for the Video great work as usual, I'm having the current dilemma of which batteries to go with Lipo or build my own from 18650 or 21700. The simplest would be Lipo(and cheaper).
Thank you for watching :) I don't like using Lipo batteries either. Because of safety...But I agree that simplicity is the advantage as you say. I'm going to try to change from Lipo to Li-ion later, too.
I am curious about direct-drive too. Because I have not experienced it yet. But it seems to be a downside to not be able to change the gear ratio. I'm going to try it when I get a chance.
when you are recording in 4:44 while taking a ride on your board, the shadow looks quite different to you body because it holds a selfiestick or something like that. How did you do that without seeing a Stick in the video? ;:D
Well, I'm not sure. But to tell you my opinion, the 6380/170kv motor has a strong torque. This can give flexible double-king-pin truck instability when combined. I don't know your battery setup plan, but a double-king pin truck is not suitable to bear strength if it will be 12s battery.
Then how about this? www.boardbumpersshop.com/product-page/copy-of-evolve-gt-29t-drive-gear-upgrade-kit-fits-3-types-of-wheels The torque is slightly reduced, but the top speed is 50 km/h (30 mi/h). I was satisfied.
Thank you for watching :) This is not all set yet. So I'm still using a balance charger after taking the battery out. However, when every part is confirmed, BMS will be installed.
@@TIMMIAY Not too many BMSs matches the high discharge rate of a 12s Lipo battery. There are a few, but they are too expensive. I think it would be better to just use a lithium-ion cell pack with BMS.
This is not all set yet. So I'm still using a balance charger after taking the battery out. However, when every part is confirmed, BMS will be installed.
Hello, Alex. Thank you for watching ;) BMS of 12s Lipo batteries are difficult to obtain. The reason is that the discharge rate is high. So I am thinking about whether to change to a lithium-ion battery pack with BMS. But If you use a Lipo battery, please refer to this. When using the Lipo battery, remember to control the charge to 60% when not in use. If you don't use it for a long time after a full charge, Otherwise, the swelling phenomenon of the battery can be connected to the fire. You should also check the voltage of each cell often. It is true that Lipo batteries are powerful but cumbersome to use. BMS, charger - alienpowersystem.com/shop/bms/battery-bms-with-switch-for-12s-lipo-battery-l16s50/
@@alexcretu3172 I haven't changed it yet so far. And check this out. It's a 12s lithium-ion battery pack with BMS. diyelectricskateboard.com/collections/electric-skateboard-battery-pack
I have that same problem with acceleration. I just start accelerating and suddenly it stops and almost thorw me from the board. Do someone know how to solve it? I have sk3 6374 192kv motor and vesc(so esc is not problem) and I run 12s at 50 amps max
Hey Kami! I have purchased the same flipsky vesc6.6 and I am currently having issues connecting the tool on the computer to the vesc. Is there any good place to go for troubleshooting with this?
KAMi JUINs flipsky wont respond to me. I have been trying to do this for a while now, read all troubleshooting I could and still no answer. The warning tells me to make sure that the usb and vesc are plugged in. I am very stuck :(
yungplague G59 lol it’s all good and yes. With my impatience and ignorance I finally realized I was using the power cable. 9 months later I’ve enjoyably put well over 500 miles on my board! Need a new remote though cause I fell on my old on a few too many times and it gave out all together
Your cone bushing is on backwards. If you are going to flip it like that you might as well just stick with a barrel. Never seen anyone put a cone bushing in that way.
That's the right way to use that bushing. The reason it looks like it's backward is that it's a bushing feature and it's made for Downhill. The bushing in that shape was strongly designed for speed wobble. You can find it on the Riptide homepage.
It’s on backwards I downhill every other day this will cause your board to be unstable don’t listen to him I usually run a off set reverse king pin and the support bushing is this way but it would NEVER be that way on my king pin
The best way for over 120 mph 55+55!?!? Is taiming bell polen 4×4 I have the sample weeling is in center of weeling this particular from the electro is check in welding welling the grafi of the next 🎚 is arbol zj chop our santacrus is in 🗣
많이 라이딩은 못했지만 그동안 느낀 단점을 보안하기위해 전동보드의 몇가지 부품을 교체해봤습니다. 그리고 그과정을 비디오로 만들어봤습니다. 사용한 부품정보는 설명박스 아래 남겼습니다.
I haven't ridden much it, but I've replaced some parts of my DIY beast to cover the shortcomings I've felt. And I made a video of that process. Enjoy it.
I left the parts information in the description box below.
카미님 혹시 필요없는 부품 저에게 주시면 안될까요ㅜㅜ
나의 보드도 업글좀 해주시와유
Recording using a 360 camera like this gives fantastic results.
Thank you for watching :)
Great video👍
Love it, that you are doing speed tests
Thank you for watching :)
This is a really impresive build. Looks sick too!
Thank you for watching :)
Been waiting for this board update thanks
No problem :) and thank you for watching ~
Ah nice! High quality E-board videos.. I love it!
Thank you so~~~ much :)
I love that you edit your camera wand out of your videos seems like someone is filming you.!! Good job on your editing!!
Thank you :) I used a 360 degrees camera
diy 의 가장 큰 장점은 자가수리 및 지속적인 업글이 가능하다는 점 같아요
예전에 라디오 같은 거니 조립해 봤지 이런 건 꿈도 못 꿨는데 이번 기회에 좀 알아보고 작은 거부터 도전해 봐야겠어요
시청감사합니다 :) DIY는 말씀하신부분도 있지만 자기만족이 더 큰것같아요. 브랜드보드의 섬세한 기능과 마감은 어렵지만 도전해볼만하다고 생각합니다.
I love your styling.👍Larger street wheels was a smart move but your battery ground clearance freaks me out. 😧 Thin battery packs will take much of the anxiety away.😑
Your work is really slick and beautiful to watch...thanks for posting.😎👍👊
Thank you for watching :)
@KAMI, great build.
Thanks :)
항상 잘 보고 있습니다.감사합니다🤠영상이 점점 더 좋아지네요👍🏻👍🏻👍🏻
항상 감사합니다 :) ㅎㅎ
Thank you for a great video. I will use this information for my build.
And ur dog is cool too. Lol
Thank you for watching :)
The two 6s packs is safe for drawing 80 Amps an hour at 12s, or double for short bursts. Since one motor can draw 80 Amps at 12s, and you have 2 of them, I'd say the battery change is more of a safety update than an upgrade.
Thank you for letting me know. I need to study more about batteries :)
Hey KAMi nice vid but what is the range?
The new battery has yet to be tested for range. I will not forget to let you know after checking it.
@@KAMiJUINs okay no problem, you are the best.
Hi Kami, Nice video! i have been watching your videos with much joy.
I have just recieved my Evolve GTX AT, and allready am in love with it! keep up the modding :) Greetings from the Netherlands.
Thank you so~much for visit :) enjoy your riding with safety.~
KAMi JUINs allways... safety is nr 1! 👍🏻
another awesome video , with lots of details ! nice!
Thanks x 10000 :)
@KAMi JUINs I whish i had a board even close to this one. Im very excited about the wowgo 2 s i recently ordered, i know its not the newest, but my budget is low, and i heard a lot of ppl saying it was one of the best at release time. So im excited, but kinda jealous, because u have perhaps, the strongest and fastest board ever recorded ;) Keep on the good work!
Greetings from Germany dear KAMi :)
Thank you so much for saying that :)
오랜만에 영상을 보니 반갑습니다 .어제 저도 빳대리가 다 없어질 때까지 열심히 타고 다녔는데 요즘 보드 타기가 아주 좋죠. 저도 고속으로 달릴때 문제를 단순이 저가 보드를 사용하니 어쩔수 없는 경우라 생각을 했는데 부싱만 바꿔 주어도 문제를 해결할 수 있다니 놀랍고 고맙습니다 ㅋ.
시청감사합니다. 저도 여러가지 시도해보고 있어요. 딱히 제가 사용한 방법이 모든 보드에 맞는 것은 아니라서 참고로 이용해주세요~
정말 유용하고 영상편집도 좋네요^^ 항상 잘 보고 있습니다. 나중에 같은 조합으로 저도 시도 해보고싶네요 ^^
시청 감사합니다 :)
안녕하세요. 부싱에 관심이 많은 남자 입니다.^^
한가지 이해가 안되는 부분이 있어서요.
Venom Bushing Graph(프로라이더가 추천하는 부싱 세팅표) 를 보면
Board Side 부싱보다 Road Side 부싱이 더 loose 잡혀 있는데요(이제까지 그렇게 세팅하는 줄만 알았어요ㅠㅠ)
Kami 님은 반대로 Riptide FatCont Hard 부싱을 Tight 하게 세팅하여 놀랐습니다.
딱히 반대로 세팅해도 문제가 없는지와 원래부터 반대로 세팅하는게 맞는건지요? ㅠㅠ
Also use golves with plastik packs in case you fall. You can make small pack and control your board with remote. I ride so in a e-board-race
this is an awesome board, well done! great deck, tons of power, and now it is smoother, just would like to know range and the only thing i would change if possible is to get the battery and esc a little more above the ground, but amazing video.
Thank you for watching :) And You're right. This is just my way of doing it, not the answer. I want everyone to do it their own way.
Love your videos man! Great work as usual! Keep it up!
Thank you so~ much :)
hi, love your videos. I'm trying to replicate this build and I wanted to know what's the total range with this new batteries? highly interested!
thanks and keep up the good work!
Thank you for watching :) It has a range of about 10 miles. But I recommend you a 12s lithium-ion battery pack with BMS rather than Lipo batteries. Because, the Lipo battery is difficult to manage, and It has to balance charge before installing the BMS. (There is not much BMS for 12s Lipo and the price is expensive.)
And I hope your plan goes well.
Sick video, I love your helmet. Full face protection but still sleek. Who makes it?
Thank you for watching :) Probably TSG alien lol
영상 잘 보고 갑니다~! ㅎㅎㅎ 50km대 라니 상상만으로도 아찔하네요.... 항상 안전 라이딩 하세요~!!
네~ 항상 시청과 댓글 감사합니다 :)
having the trucks in a drop through configuration makes the board feel stiff. By loosen the front truck will help it turn more but buy switching the truck to top mount position will help the board with turning without loosen the trucks. Also adding an angle wedge to the front trucks help raise the degree of the truck giving it more turn ability. Check out Landyachz evo longboard, it has a wedge on the front of the board to make it turn more and a de-wedge on the back to make it more stable. Also shorter wheel base makes the board turn more(less stable) and longer wheel base make the board turn less(more stable). I think if you can switch out the board for the Landyatchz evo 36/40 then you might have a board you'll feel comfortable going 35mph.
Thank you for watching :) And I had thought about the Landyatchz Evo before I picked this deck. Thanks again for your sincere reply.
Hi! I really love your videos and im building a board of my own as well. I wanted to know what do you use for your enclosures?
Thank you for watching :) This is just a solid plastic case. I'm going to replace this with a stronger material in the future.
Very cool built.. I like it.
Thank you so much :)
Have you felt the difference after replacing the battery? In my opinion from what I read recently on the internet. The serial connection of the battery increases the voltage, but the capacity remains 6200mAh although we have 3x6200mAh. I thinking about 12s or 10s batteries, is easy to build own battery pack. Thanks for another amazing video!
Thank you for watching :) I tend to enjoy speed rather than riding for a long range. That's why I chose this method.
Tenho vontade de comprar um desses mas aqui no brasil é muito caro até bike elétrica, pode ficar barato se comprar por parte talvez.
Hello kami if i'm not able to do this battery adaptator by myself can i find it on market ?
Also i recomend to put your back leg closer to your front leg so less woble. It will be harder to carve but good for speed.
Thanks for your comments :) Спасибо!!!
Thank you for the Video great work as usual, I'm having the current dilemma of which batteries to go with Lipo or build my own from 18650 or 21700. The simplest would be Lipo(and cheaper).
Thank you for watching :) I don't like using Lipo batteries either. Because of safety...But I agree that simplicity is the advantage as you say.
I'm going to try to change from Lipo to Li-ion later, too.
Nice upgrade
thanks :)
You need to put board side more stronger bushing. 95 A-boardside 85a-Roadside. This will be more stable and nive lean with turn
53 km/h incredible!😲 it’s so fast!
Why do people dislike this video? There is nothing negative in the video! 5 dislikes to much!
Every man has a different point of view and I think it could be. But I'm thanks to you to say like that :)
Nicee! You could try a 12s lion battery setup as well.
Thank you for watching :) I know that the Lipo battery is unstable, so I will do as you say when I change the current battery.
What helmet is that? It's cool. Very Daft Punk like
TSG pass Pro full-face helmet :)
wich trucks are theese you used in this skate ? awesome
It was the Torque board 12inch trucks.
이번 세팅은 이볼브와 비교해서 어떠셨어요? ㅎㅎ
지금은 DIY가 가속력과 탑스피드 모두 빨라요 (배터리 40C의 방전, 바퀴변경 모두 효과를 본것 같아요)
하지만 동력성능만이 좋은보드의 척도가 될 수는없어서 둘 중 뭐가 좋다고 말하긴 좀 힘든것 같아요. (두 보드 모두 장단점이 있는것 같아요)
You need to record amp draw to see how much is using, with 40C it can power that setup really well.
Thank you for watching :) I'm not an expert yet. But if when I know how I really want to check it out.
Love this video man..
Thank you so much~ man :)
Kami, what opinion do you have about belt vs direct-drive (external, not motor wheel)?
I am curious about direct-drive too. Because I have not experienced it yet. But it seems to be a downside to not be able to change the gear ratio. I'm going to try it when I get a chance.
배터리 충전하실때 따로 밸런싱은 어떻게 해주시나요??? Bms작업을 따로 하신건가요??
이보드는 모든 부품이 픽스된 것이 아니라서 아직까지는 배터리를 탈착한 후 충전은 발런스 차져를 이용하고있습니다. 향후 모든 것이 픽스되면 그때 배터리 스팩에 맞춘 BMS를 설치할 생각입니다.
when you are recording in 4:44 while taking a ride on your board, the shadow looks quite different to you body because it holds a selfiestick or something like that. How did you do that without seeing a Stick in the video? ;:D
Thank you for watching :) I use an INSTA 360 ONE X camera. The camera can hidden stick while taking the video.
Hi Kami, I have a question. Will the evolve double kingpin trucks fit these motors?
No, It can't. Probably less than in 6375 sizes.
KAMi JUINs do you know any double kingpin trucks that would fit it?
Well, I'm not sure. But to tell you my opinion, the 6380/170kv motor has a strong torque. This can give flexible double-king-pin truck instability when combined. I don't know your battery setup plan, but a double-king pin truck is not suitable to bear strength if it will be 12s battery.
KAMi JUINs thanks. I just wanted something like an evolve but with a higher top speed
Then how about this?
www.boardbumpersshop.com/product-page/copy-of-evolve-gt-29t-drive-gear-upgrade-kit-fits-3-types-of-wheels
The torque is slightly reduced, but the top speed is 50 km/h (30 mi/h).
I was satisfied.
Hey great vid! how do you charge the batteries?
Thank you for watching :) This is not all set yet. So I'm still using a balance charger after taking the battery out. However, when every part is confirmed, BMS will be installed.
@@KAMiJUINs could you make a video of how you installed a BMS? I want to make a similar board
@@TIMMIAY Not too many BMSs matches the high discharge rate of a 12s Lipo battery. There are a few, but they are too expensive.
I think it would be better to just use a lithium-ion cell pack with BMS.
@@KAMiJUINs Damn. Lipos have so much more ah for their size opposed to li ion. Like a 12s4p lion takes up the whole board and makes the deck stiff
@@TIMMIAY I agree XD
Hey, on last movie I ask you about range. How far away you can drive?
The new battery has yet to be tested for range. I will not forget to let you know after checking it.
점점더 장인이 되어가시는군요 ㅎ
저는 장인이 아닙니다 ㅎ 진짜 장인분들은 다들 숨어 계셔요 ㅋ
How do you charge it? do you have to take the batteries out?
This is not all set yet. So I'm still using a balance charger after taking the battery out.
However, when every part is confirmed, BMS will be installed.
Hello. good job. I'm doing the same. which battery charger do you recommend? and which BMS? to be able to load all 3 together
Hello, Alex. Thank you for watching ;)
BMS of 12s Lipo batteries are difficult to obtain. The reason is that the discharge rate is high. So I am thinking about whether to change to a lithium-ion battery pack with BMS.
But If you use a Lipo battery, please refer to this. When using the Lipo battery, remember to control the charge to 60% when not in use. If you don't use it for a long time after a full charge, Otherwise, the swelling phenomenon of the battery can be connected to the fire. You should also check the voltage of each cell often.
It is true that Lipo batteries are powerful but cumbersome to use.
BMS, charger - alienpowersystem.com/shop/bms/battery-bms-with-switch-for-12s-lipo-battery-l16s50/
@@KAMiJUINs OK! I got it.
did you make any more changes to the beast ??
so do you advise me to load one battery at a time?
@@alexcretu3172 I haven't changed it yet so far. And check this out. It's a 12s lithium-ion battery pack with BMS.
diyelectricskateboard.com/collections/electric-skateboard-battery-pack
@@KAMiJUINs
ok then I buy a 12S2P 30q samsung. thank you very much. I follow you on instagram :)
@@alexcretu3172 Thanks ;)
I WOULD LIKE TO ASK THE RANGE FOR THIS NEW SERIES OF BATTERY WITH HIGH DISCHARGE?
I'M AN AVID FAN OF YOURS AND WAITING FOR YOUR NEW VIDEOS
Thank you for watching my vids :) Although it has not been fully tested, it is estimated that it will be 15km (9mi) by calculation.
I have that same problem with acceleration. I just start accelerating and suddenly it stops and almost thorw me from the board. Do someone know how to solve it? I have sk3 6374 192kv motor and vesc(so esc is not problem) and I run 12s at 50 amps max
까주님!! 그 보드들중에 자작보드들중에서 중고로 구매하고싶은데 판매하실의향 있나요??
good job
Thank you :)
I use three 4s 40c lipo batteries, what charger do you think is right?
I use the "imax B6" now. (It is the most used and cheap product.)
How does the TB motors compare to the Flipsky motors
TB = 6380 170KV 4100W ------ Better torque
FS = 6384 190KV 4000W ------ Better high speed
Hey Kami! I have purchased the same flipsky vesc6.6 and I am currently having issues connecting the tool on the computer to the vesc. Is there any good place to go for troubleshooting with this?
As far as I know, I've heard that you should plug in the cable several times when it's. Well, if that's not the case, shouldn't you ask Flipsky?
KAMi JUINs flipsky wont respond to me. I have been trying to do this for a while now, read all troubleshooting I could and still no answer. The warning tells me to make sure that the usb and vesc are plugged in. I am very stuck :(
@@Pootski302 make sure the usb can transmit data and not just power, im 9 months late :( did you ever figure it out?
yungplague G59 lol it’s all good and yes. With my impatience and ignorance I finally realized I was using the power cable. 9 months later I’ve enjoyably put well over 500 miles on my board! Need a new remote though cause I fell on my old on a few too many times and it gave out all together
i just ordered some glow wheels, how are yours holding up?
It's still fine :) It doesn't break easily damaged.
@@KAMiJUINs hmm ok thanks for the input
You’re a clever dude. What is your profession?
Hi, there :) Thank you for visit.
What kind of selfie poll are you using to make it disapear in video?
@Oliver J. Thanks :)
It's nice how you CGI (selfie stick) out of a video content - but you still can see a shadow of it on a (: pavement :)
Thank you for watching :) I used an Insta 360 camera. That's why you can't see the stick. (camera's software action) But it cannot erase the shadow.
so weird seeing the shadow of the camera stick but not seeing the stick lol
It was a 360' camera so you couldn't see the stick. (INSTA 360 one X camera)
What is the range for the board with new batteries?
The battery discharge rate has increased, but its capacity has decreased by 2,000 mAh. So it is about 10 to 15 kilometers.
How do you make GoPro and selfie stick disappear in the video
It was an INSTA 360 camera :)
What action cam did you use?
I used two action cams when ride. (for the most part = INSTA ONE X 360, speed recording = GOPRO 6)
What deck are you using?
BUSTIN "sporster 35inches" deck
Good video amazing!!!!
Thank you for watching it.
How do I make sure that my motors are not too long?
I used a motor length of 80mm. If you want to make it short, it will be replaced with a 76,74,55-millimeter-long motor.
혹시 초보자가 diy 해서 저출럭으로 타고놀아도 괜찮을까요 ?
그러시다면 저가완성모델을 구입하셔서 타시는것이 금액이나 시간적으로 모두 이득일것 같아요.
DIY가 만들면서 변수도많고 그렇다고 금액이 적게들지도 않아요. 굳이 많은 출력이 필요하지 않다면 위에 방법을 더 추천드려요.
@@KAMiJUINs 그렇군요 만들어보는것도 재밋어보여서 여쭤봣습니다 ㅎㅎ 답변고맙습니다
Your cone bushing is on backwards.
If you are going to flip it like that you might as well just stick with a barrel.
Never seen anyone put a cone bushing in that way.
That's the right way to use that bushing. The reason it looks like it's backward is that it's a bushing feature and it's made for Downhill.
The bushing in that shape was strongly designed for speed wobble. You can find it on the Riptide homepage.
@Oliver J. Thank you for visit Oliver :)
It’s on backwards I downhill every other day this will cause your board to be unstable don’t listen to him I usually run a off set reverse king pin and the support bushing is this way but it would NEVER be that way on my king pin
요번 영상도 좋아요!
네 ㅎㅎ 요번 댓글도 감사해요 ^^
영상에 쓰인 360카메라 정보도 부탁합니다
인스타 원 엑스 360도 카메라입니다.
How far can tou go with this board
I don't know for sure yet.
It is expected to be about 7 to 9 miles.
보드재벌 멋지심
시청감사합니다 :)
혹시 속도 측정하는 어플이름이 뭔가요?
Speedometer = ios 용입니다.
what deck is that?
BUSTIN 35inches sposter deck
bustinboards.com/collections/sportster-series-commuting-and-freeride-longboard
Can I fit a 27 “ u dear this deck? Ty
I just checked. The case will be 23 inches long, the limit.
KAMi JUINs ok thanks.
No problem ;)
How many mph is it
around 35-36mi/h max
KAMi JUINs can you try and make a 40 mph one pls.
@UCtEL1iF7H-GsV2fZx3K4a1A I am watching this Video over and over, cant believe the Top Speed of over 50 km/h
There are many faster boards, too. (Bio board, kaly nyc, LaCroix, BAJA........)
@@KAMiJUINs Yes but ur Board has peronality. Because of you as a whole Person and Creator. Keep on the good work!
@@olidonbello Thank you so~ much :)
@@KAMiJUINs meepo awd pro
2x 6380 95kph top speed. my best ;)
Cool :)
The best way for over 120 mph 55+55!?!? Is taiming bell polen 4×4 I have the sample weeling is in center of weeling this particular from the electro is check in welding welling the grafi of the next 🎚 is arbol zj chop our santacrus is in 🗣
give me one please 🙈
혹시 필요없는제품들 저에게 주시면 안될까요ㅜㅜ
부탁드려요ㅜㅜ
This is serious
:) Thank you for visit
UNSUBSCRIBED THIS WHY CANT I SEE THE CAMERA YOU HOLDING
HAHAHA, So funny :)
The unfortunate person has only one skateboard in the world, and everyone films it🍆🍆🍆🍆😡😡😡😡