Coyote Swap 03 Mach 1 Lives!!!
Вставка
- Опубліковано 19 вер 2020
- It’s been a big long project but finally got the car running..No tune yet, this was a operating temp start up.. stay tuned for plenty of footage on this car!
2016 Gen 2 Mustang Gt engine
FRPP control pack
PBH speed drive
1320junkie ported boss manifold and TB
Hooker 1 7/8 headers
Full 3” hooker x pipe and hooker black heart catback
Built 26 spline T45/Spec 3+ clutch
FRPP aluminum ds
Built 8.8/456 gears/31 spline/cobra diff
AJE tubular k member/a arms/coilovers all 4 corners
Strange struts and shocks
BMR tubular uca’s/lca’s - Розваги
Nice man glad to see it running
Excellent. Very nice Mach 1
Wow this Mach 1 is so badass!!!
love everything about it
Nice build. I love how clean the wiring is.
Thank you,we’re all about clean with our builds
@@Coyote_Mach If you have time I would love to see a detailed walk around of the build.
Congrats man time to hit the track
Love it!
I love it. Just needs a whipple on top now 😜
Looks nice
Just subbed. Very cool swap!
That thing is sweet
Beaaaaaaauuutiful
Car looking 👌, question did you have to get the car refereed for smog. I have 86 thunderbird turbo coupe and would like to coyote swap.
Shesssh that’s hard!
Can’t wait to see you rip this thing
What brand of wheels our those
@@johnperez728 I think they are the Aodhan ds08
Cool...Ford every where ...
What does the exhaust consist of? Sounds awesome! Nevermind....I just saw the description. Thanks!
What type of wheels are those ?
Dude this build is perfect...thank you for going with 456 gears and no pussing out like everyone else with a similar setup with 373 or 410 that is nowhere near enough for a high revving coyote with a long geared 5 speed. 456 is perfect unless you're boosted then maybe 410 but no less even with boost (unless it's turbo). This coyote sounds wicked what is the catback setup?
Thanks bro,I learned loonng ago to not fear the gear in my 4.6 32v days,nothing better than a angry dohc ford with a 430 or 456 gear 👌🏻
Catback is a hooker blackheart 3” setup,it was a complete kit with headers and x pipe,mufflers can be purchased seperate I believe
I'm looking at a Coyote swapped Mach 1 currently with about the same setup as yours, except it has a HUGE cowl hood that I cannot stand. Looks like the Mach 1 hood clears the Boss 302 intake? What did you do to make it work? Because I was thinking of going with a Gen 3 manifold and finding either another Mach 1 hood or Terminator hood
Did you mount the shaker back to the motor or the hood?
Mounted to the hood
What brand wheels?
Imagine someone thinking they see a mach 1 snack and get gapped by it
That’s why I love this car lol 🤙🏻
That's my boy killn shit
Is there room for turbo or supercharger?
Such a beautiful build. I dream of doing this to my mach 1
The coyote isn't any larger physically than the 4v 4.6 that came in it so no reason you can't turbo or supercharge or whatever you wanna do. Its essentially a newer version of what came in the mach.
Wheel and tire specs? Trying to figure what specs I want for my mach 1!
19x9.5/19x11 22 offset
265/35/19 front tires
305/30/19 rear tires
No spacers and I rolled the quarters
Will be putting 345/30/19 rears when these need replacing lots of room easy to achieve,get rid of the quad shocks once aftermarket control arms are installed
Hopefully not getting too personal, but what was a rough range of the cost of install, including everything
The cost of install was free,did everything myself,got about 13-15k in parts including the car I bought as a roller,dmv fees and a tune..
@@Coyote_Mach Nice! Only reason i ask is I have a 99 cobra and the original power plant is becoming a bit tired. Exploring options. Thanks!
How did you fit the boss intake under the hood?
I mounted the factory shaker to the hood with my own brackets and the boss manifold fit no problem..I run AJE k member and motor mounts..
What are your wheel and tire specs??? Love the way it sits
19x9.5 front
19x11 rear
Both -22mm offset
265/35/19 front tires
325/30/19 rear tires
@@Coyote_Mach thank you 🙏
Is it a carted x pipe or no? I'm not going to lie, this is the best sounding coyote out there.
No cats my friend,thanks!
@@Coyote_Mach awesome.. you have an Instagram?
@@jarred281
No Instagram,more uploads to come nice weather finally here
Where did u place the frpp control pack ? I like the space in the Engine bay
Inner fender with the Fox body bracket PBH sells
@@Coyote_Mach oh kool I see the canister are you running a/c also ? I’ve seen that the oem lines are a tight fit
@@Jugotdatjuice
Yea OEM lines weren’t fitting at all,I do have ac components and will be doing ac soon,going to have custom lines made to my liking from condenser/compressor to the firewall
@@Coyote_Mach understandable, do you have a instagram or something? I’ve got a few other questions I wanted to ask about a Mach swap in particular
@@Jugotdatjuice
I do not have IG just a YT,I can answer your questions here,not a problem
Wheel brand and size ?
Aodhan 19x9.5 and 19x11
Name of rims please
Is the car for sale?
Sure,25-30k, just installed a t56 magnum trans.got 100 miles on it.
What mufflers you got
Hooker blackheart mufflers
Coyote_Mach B thanks 🙏 definitely wanna see more videos of this car.
Mmmmmmm
I feel like the sound of a coyote goes better with a new edge
Nope
Able to street drive the car in California?
I drive it on the streets of California as I please, lol epa don’t run my life 🤙🏻
@@Coyote_Mach will it pass emissions
@@brettbaker8130
Yup 👍🏻
Where in cali you located? an do you have a email? thx
Any regrets coyote swapping?
Absolutely none..should have done this years ago with my DSG 03 lol glad I made it happen to this car!
@@Coyote_Mach I was on the fence about doing a coyote swap or built teksid. More and more it looks like the coyote is the way to go. Only change I would make is removing that cowboys plate holder...lol
Thats a nice piece of property you got there by the way!
So wet !!