Transmission Fluid and Filter Change - Jeep Wrangler JK - W5A580 - 60,000 Mile Service - Topsider
Вставка
- Опубліковано 7 кві 2018
- 🔔 Please CLICK THE BELL if you want to see my videos! 🔔
It was time to change that fluid and filter in my Jeep, which has the 5-Speed Auto W5A580 Transmission. Here's the parts list for this service:
52108332-AA Gasket (Optional but recommended)
52108325-AA Filter
68218057-AB ATF+4 Fluid
Also, as mentioned in the video, here's the Topsider MVP that I used:
amzn.to/2JvJ0xI There are other extractors on the market... some cheaper and some more expensive. I just liked this one.
Awesome. Mechanic wanted to charge me $5000 to rebuild my transmission and stop a check engine code. I told him "Let's just try to change the fluid first". He told me I was wasting my time and he wouldn't service my transmission - only rebuild it. I did it myself. Cost me less than $100. Everything is shifting smoothly, and no more check engine light. This video is greatly appreciated!!!!
This video was VERY helpful. It made changing the transmission fluid take less than an hour. The Topsider recommendation was perfect. Thank you!
Using the dealership wrench set works without dropping the exhaust or jacking the transfer case up to get to em. Came with the Jeep so I figured it will work without the extra attachments
Man what a great video on this. Ordered a topsider, will go to the dealer and get enough fluid for the Power steering, Trans, and Transfer case. Looks pretty straightforward and good to see your ways of dealing with clearance issues and getting the forwardmost bolts appropriately tight.
Thanks for the video. I’m going to do my 60k change very soon. And luckily I have access to a full service garage 🙏🏼. Thanks again for the insight, much appreciated 💪😎👊
Just did mine.....WHAT A PAIN!!!!!!!!!!!! Wouldn't have tackled it, however, without your great video! The stealership wanted $480 to do mine. I bought a kit from Quadratech for $60 and did it myself. Boom.
The worst part for me was getting the pan around the exhaust on a stock setup. all my exhaust bolts are rusted beyond repair.
Suggestion... Loosen the pan bolts (not all the way) enough to make a space to use the Topsider once again to drain additional fluid from the pan. Simply slip the tube into the space created by loosening the bolts.
Great video, easy to follow. Thanks for taking the time to put this together.
Thanks so much for this video. It helped me a LOT. Just finished doing this on my 2016 JKUR. So far no leaks.
Nice "How-To" video. I'll be doing my transmission service on my 2013 JK the same way you presented here. Thanks!
Thanks for doing this video. When I am ready to change mine, I will use this as one of my reference point for sure. The thing about doing maintenance myself is those tricky parts about getting at bolts and even breaking them free. Good tips in here to do that with this!
That's pretty awesome man. Love that top sider!
Thank you so much for this video. This helped me tremendously , I am about to swap out my gasket as its leaking pretty bad . Sitting at 60k miles
CPO...
I started having leaks and realized it was coming from the transmission cover seal then I realized that needed to be changed at 60k miles. I’m at 84k miles rn guess the leak was a blessing in disguise. I will replacing the filter, seal and new fluids soon. Ty for the video! Very informative! Much appreciated!
Excellent video Overclocked, Thank you!!👍
Important maintenance on a Jeep. Do it long before 60K. My Jeep had more pick up and energy. I did mine at 40K and it was due.
Nicce job CPO, like the topsider idea!
Thanks for the go by. Very well done.