MASSIVE 145 lb Machinist Vise Restoration | Milling Vise
Вставка
- Опубліковано 16 лип 2020
- Here is our restoration of an old Machinist Vise. We got this massive 145 lb vise from an auction of a old machinist shop.
A little buffing, a simple paint job and it's good as new! 🔥
Watch our other restoration videos here! ⬇
• Restoration Projects
If you have any questions about this project, please leave them in the comment section.
Thank you!
Many more projects will come, so be sure to subscribe! 👍
TOOLS/MACHINES:
3M - Noise Cancelling Headphone ► amzn.to/31zHkxB
3M - Respirator ► amzn.to/31z1708
Makita - Drills ► amzn.to/2HwZVn6
Steel Parallel Set ► amzn.to/3dQIry7
DeWalt - Angle Grinder ► amzn.to/34jfTKh
Penetrol Additive ► amzn.to/3meeF9n
Kleenguard - Safety Glasses ► amzn.to/34juNQS
Milwaukee Band Saw ► amzn.to/37zKrcW
Linseed Oil ► amzn.to/2TeXhVA
CAMERA GEAR :
Canon 60D ► amzn.to/3jkJzLu
128g Memory card ► amzn.to/3joFrd8
Tripod ► amzn.to/34noZpo
Links included in this description might be affiliate links. If you purchase a product with the links that we provide, we may receive a small commission. There is no additional charge to you! Thank you for supporting our channel so we can continue to provide quality content!
Music:🎵
Not For Nothing - Otis McDonald (No Copyright Music) - Наука та технологія
That's what I call a complete clean up !
Very nice job. Video turned out very well and good.
Clean 👌
Merci! 🙌
The two indents at the top of the vice near the flat head screw are oiler holes. They work by pressing the ball down while inserting oil in the hole. Try and take off the paint on them and pressing the ball down with a screwdriver. They should be spring loaded.
Good call, but don't worry knew about that and they are well oiled! 👍
Это не реставрация. Это техническое обслуживание. Почистил и покрасил по-петушиному. А тиски очень классные.
I'll take it, if u pay the shipping.. lol.. man that thing is huge... Job well done...Wherever you found that, do they have anymore?
Hahahaha thank you !
@@KOPOprojects keep an eye out for one for me.. lol.. take care my friend...
What was the paint you used? I’m looking for a good quality paint for some metal projects. Thanks!
I used some Tremclad oil paint on that vise and it's holding up pretty well !
Hi, do you have any idea about origin of this vise ? Who is the manufacturer ? I got the same but half of the size :) Greatings from Poland
I actually made some research but I never found anything about the manufacturer of this vise, sorry.
How's the jaw lift on that thing? I would think it should be pretty minimal. I just dumped my swivel bridgeport vise for a Kurt. I'm in pig heaven now and could never go back.
The jaw lift is really minimal on the vise, in fact I've never noticed one before ! But Kurt vise have a
a pretty good reputation, you clearly made a good move there !
@@KOPOprojects That's good to hear. 👍 It's all about the ang lock that prevents lift.
muy buen video, di el like numero 100 me gane algo ? jeje un saludo desde uruguay
Man, you could have changed the greasers, if only for aesthetics.
Sorry, my English is very bad and this is a Google translation.
Are you talking about the oil nipples ?