Вставка
- Опубліковано 6 лют 2023
- just a Shock servicing on the Honda CRF450R & CRF250R. Getting it fresh and good again.
Link to video covering the servicing of the forks... • 1:11 Front Fork Servic...
Donate Race Fuel link... www.paypal.com/donate/?hosted...
Thanks for watching!
upallnight91@hotmail.com - Навчання та стиль
Another great video!!! Beavis is great!!!
Thanks Joel! Beavis was in a cocky mood yesterday and attacked the back of my leg lol. I gotta keep my eyes behind my head open better lol
LIFE SAVER IN ONE VIDEO. Simple straight explanation done. Thank you sir!
Great video
Thanks!
Great work as always sir !
Thank you!
Nitrogen does leak into the oil out of the bladder. And sag does change with different nitrogen pressure in the bladder, this is one reason your sag changes over time, I've done testing to confirm the sag changes before and after service with a big change in nitrogen pressure. More nitrogen is more force trying to extend the shock and pushes up the rear end, rebound damping also feels different, faster after service. I usually mark the spring and measure the length in mm to see the installed length and to see how much preload was on the spring. I like the idea of using the punch to mark the spring preload adjuster ring.
Супер! Спасибо за видео!)
I'm sorry, I dont understand.
Great! Thanks for the video!)
@@Extremeclubmoto Ahh thanks Brother! Glad you enjoyed it!
Cool dude, found your channel by accident. Thanks. Mine is due. See you at the track sometime
Whats Happening Tim! Yes see ya out there. Gonna do dade this sunday
Great video! I have a 2017 Honda CRF450R and the rebound adjustment is free spinning when I try to tighten it so the needle tip is most likely broke. If I leave it like that will it just mean I can’t adjust it or will it cause more damage?
Thanks! It wont cause any further damage so that part will be ok. You just wont be able to adjust the rebound anymore.
Hi mate
I have 2020 crf450l, I am getting clicking/ clacking noise when I push down fully on back of bike and same noise when shock to extended, my spring can be fully turned by hand , greatful any ideas
Great vid
Hmm. Not really sure. But it wouldn't hurt to completely remove the shock, then remove the spring off the shock and stroke the shock by hand just to make sure the clicking is not something inside the shock coming apart.
Hey mate,
I followed ur video step by step and all was well for about a month. About a month after I’ve now blown the shock again all oil came out. By chance do you have any idea where I went wrong?? My setup is valved pretty stiff for free ride although lately I have mainly been riding a lot of trails that have some nasty deep rain ruts that it takes some quick big blows … I’ve put about 20-30 hours on it since I last did it … is that normal
Hello. 20 to 30 hours is not a long life for a seal. They can usually last 150 or more hours. Although I have had them go bad in 50 hours or less but its kinda rare. Is the mud flap between the shock and rear tire on the bike in good shape? And the shock shaft in good shape with no rust and pitting? If alls well, then I would just change the seal again and hope this new one last longer
Does the Honda shows come with Schrader valve
Honda does use a schrader valve
$75 for nitrogen? 😮 wow
I know, crazy. Just for a fill
Are 250 and 450 crf monoshocks have same length?
If you mean the crf250r and the crf450r. Yes they are the same
Whats your rate if i ship my suspension to you for the same thing, a service, no seal replacement from louisiana 70706 area code
Hello. sevice on a shock is $120. You can email me at upallnight91@hotmail.com
You located in FL?
Yes Sir! Parrish Florida
Nice 👍🏻 I saw Tampa MX on one of your videos & was like hey Tampa FL 👍🏻 & love that 96 looking YZ. Dade City this Sunday for the extended track practice 👊🏼✊🏼 I might have to let you do my suspension. I’m due for a fluid change & I don’t have time to knock it out myself with everything I got going on
@@wiegelemike Thanks! You coming out to dade? Yes let me know, I can knock out that servicing for ya!