Dirt Bike Shock Rebuild - DISASSEMBLY
Вставка
- Опубліковано 17 бер 2020
- If you have never rebuilt a dirt bike shock, you NEED to watch this video. This video is geared toward those who have never rebuilt a shock. All the details and common mistakes shown. In Part I, I tear down the shock and explain all the processes in detail so you won't make any mistakes on your own.
- Авто та транспорт
Finally I found a video where they don't have $150 in special tools to rebuild the damn shock.
Ha! I try to use “normal” tools as much as possible! Thanks for watching!
Thank you for showing this shock rebuild. This is very similar to a 150r setup, so much appreciated.
Sure! That’s a really old video so I’m glad there are people out there that can benefit from it. Thanks for watching!
Can you replace the bumpstop without pulling the shock completely apart
Unfortunately, no. 😢
badass $$$
Glad you enjoyed it
If you have and handheld air pump you can put it on the schrader valve and give it a pump the bladder will pop right out, its a little bit messier that way but ive had bad luck with snapping valve stems.
Hey David. I never have had trouble getting the bladder off, but thanks for the tip! And, thanks for watching!
@@brian.d.mobley Really? Almost every shock i have done they have all been a major pain to get out but they also have been way beyound their service life. But I appreciate all the videos you make, they are very imformative.
@@davidpalmer287 Maybe I have been lucky! What I DO have problems with is getting that dang seal on that goes around the piston. I do a lot of cussing when I work on those! HAHA!! Thanks for watching my videos! Im so glad they help! Its very satisfying to know you can help others with stuff like this.
@@brian.d.mobley Yea. Those suck. Ive been using the low friction ones that mx tech offers they are cut with a little alignment notch in the center so the ends mate back up.
@@davidpalmer287 I have been using the same! So much easier. But they dont make one for every shock.